Author |
Message |
Tallhobbit
Joined: Aug 10, 2007 Posts: 15 Location: Kirkland, WA USA
|
Posted: Sat Sep 01, 2007 8:11 am Post subject:
|
|
|
OK I give up.
Please put me on the list for two board sets also.
Like what others have said, if I don't get some I will be very upset with myself for a very long time. And to think that I'm only two weeks away from ordering the last of my parts (going to try the SSM2210's) for my Tau Phasers. Oh well, at least I can use the precision cap meter at work. |
|
Back to top
|
|
|
fluxmonkey
Joined: Jun 24, 2005 Posts: 708 Location: cleve
|
Posted: Sat Sep 01, 2007 12:33 pm Post subject:
|
|
|
Jürgen,
I thought I'd asked to be added to the list, but apparently not... please put me down for 2 board sets. thanks again for sharing this project!!!
bbob drake
www.fluxmonkey.com |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Sat Sep 01, 2007 1:50 pm Post subject:
|
|
|
Tallhobbit wrote: | And to think that I'm only two weeks away from ordering the last of my parts (going to try the SSM2210's) for my Tau Phasers. |
If money is an issue, by all means go for LM3046's instead.
I'm so satisfied with the SNR myself that I used them in my own Tau, instead of the more expensive transistor pairs.
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
markusw
Joined: Jun 16, 2007 Posts: 23 Location: Vienna/Austria
|
Posted: Sun Sep 02, 2007 10:19 am Post subject:
|
|
|
Please count me in for one set
Regards,
Markus |
|
Back to top
|
|
|
julianw
Joined: Jul 30, 2007 Posts: 78 Location: UK
|
Posted: Mon Sep 03, 2007 1:51 am Post subject:
|
|
|
Hi Jürgen,
Please add me to you growing list! I would be interested in two board sets.
I must complement you on your neat & tidy work with the Tau Phaser boards, I'm populating them at the moment.
Thanks, Julian |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Mon Sep 03, 2007 3:34 pm Post subject:
|
|
|
Good News: Design of both boards finished!
I just sent the CAD files for both boards of the Frequency Shifter to Olimex.
Timeline:
Approx. 2 weeks until I get the prototypes
Approx. 1 week to build them and test them
Then taking orders (approx 2 weeks)
Approx. 2 weeks for manufacturing the ordered boards
Approx 1 week for populating and testing one set of the manufactured boards
Time for payment and delivery.
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
vtl5c3
Joined: Sep 08, 2006 Posts: 425 Location: PDX
Audio files: 13
|
Posted: Mon Sep 03, 2007 4:01 pm Post subject:
|
|
|
Sounds like it will be a Bright November. |
|
Back to top
|
|
|
b-funk
Joined: Jul 17, 2007 Posts: 193 Location: Berlin
|
Posted: Tue Sep 04, 2007 12:40 am Post subject:
|
|
|
ok, i can´t resist anymore. i´m in with one set....
best wishes,
tobias |
|
Back to top
|
|
|
softfin
Joined: Oct 11, 2006 Posts: 271 Location: Far in the north
Audio files: 1
|
Posted: Tue Sep 04, 2007 3:10 am Post subject:
|
|
|
I thought this is too a complicated project for me because I don't have a scope etc., but it could be mistake to miss this.
At least I've got to attempt to build this!
So I'll take one board! |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Tue Sep 04, 2007 11:34 am Post subject:
|
|
|
softfin wrote: | I thought this is too a complicated project for me because I don't have a scope etc., but it could be mistake to miss this.
At least I've got to attempt to build this!
So I'll take one board! |
A scope - even the cheapest one - would be increadibly helpful for adjusting this!
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
clickmrmike
Joined: Jun 08, 2007 Posts: 48 Location: Gnashville
Audio files: 1
|
Posted: Wed Sep 05, 2007 8:25 am Post subject:
|
|
|
So, is there an "official" parts list yet? I've got to order some stuff from mouser, so I may as well get the parts for this too... |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Wed Sep 05, 2007 10:30 am Post subject:
|
|
|
clickmrmike wrote: | So, is there an "official" parts list yet? I've got to order some stuff from mouser, so I may as well get the parts for this too... |
Not yet ... this will take some time.
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
clickmrmike
Joined: Jun 08, 2007 Posts: 48 Location: Gnashville
Audio files: 1
|
Posted: Wed Sep 05, 2007 10:50 am Post subject:
|
|
|
jhaible wrote: | clickmrmike wrote: | So, is there an "official" parts list yet? I've got to order some stuff from mouser, so I may as well get the parts for this too... |
Not yet ... this will take some time.
JH. |
I've created one from the FS-1 schematics (less the matched cap/resistor networks in the dome filter), if that would be helpful. |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Wed Sep 05, 2007 11:04 am Post subject:
|
|
|
clickmrmike wrote: | jhaible wrote: | clickmrmike wrote: | So, is there an "official" parts list yet? I've got to order some stuff from mouser, so I may as well get the parts for this too... |
Not yet ... this will take some time.
JH. |
I've created one from the FS-1 schematics (less the matched cap/resistor networks in the dome filter), if that would be helpful. |
The new one is slightly different / improoved.
Maybe I can just post a printout of the component overlay of the two boards, until I make the final BOM list.
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
clickmrmike
Joined: Jun 08, 2007 Posts: 48 Location: Gnashville
Audio files: 1
|
Posted: Wed Sep 05, 2007 11:13 am Post subject:
|
|
|
jhaible wrote: | clickmrmike wrote: | jhaible wrote: | clickmrmike wrote: | So, is there an "official" parts list yet? I've got to order some stuff from mouser, so I may as well get the parts for this too... |
Not yet ... this will take some time.
JH. |
I've created one from the FS-1 schematics (less the matched cap/resistor networks in the dome filter), if that would be helpful. |
The new one is slightly different / improoved.
Maybe I can just post a printout of the component overlay of the two boards, until I make the final BOM list.
JH. |
That would work; I could help put together the BOM, then, if you like. |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Wed Sep 05, 2007 3:28 pm Post subject:
|
|
|
clickmrmike wrote: |
That would work; I could help put together the BOM, then, if you like. |
I've started a web page for the FS-1A, and put the component overlay for the two boards there:
http://www.jhaible.heim.at/fs1a/fs1a.html
Feel free to ask questions when you're putting together a preliminary BOM.
Some values aren't determined yet; the majority of parts is, however.
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
clickmrmike
Joined: Jun 08, 2007 Posts: 48 Location: Gnashville
Audio files: 1
|
Posted: Wed Sep 05, 2007 8:31 pm Post subject:
|
|
|
jhaible wrote: | clickmrmike wrote: |
That would work; I could help put together the BOM, then, if you like. |
I've started a web page for the FS-1A, and put the component overlay for the two boards there:
http://www.jhaible.heim.at/fs1a/fs1a.html
Feel free to ask questions when you're putting together a preliminary BOM.
Some values aren't determined yet; the majority of parts is, however.
JH. |
Great, I'll get on it. Are the I/O headers MTA100? I'm guessing so, and the larger power header is MTA156 MOTM/Blacet style. |
|
Back to top
|
|
|
jhaible
Joined: May 25, 2007 Posts: 2014 Location: Germany
Audio files: 24
|
Posted: Thu Sep 06, 2007 2:09 am Post subject:
|
|
|
clickmrmike wrote: | jhaible wrote: | clickmrmike wrote: |
That would work; I could help put together the BOM, then, if you like. |
I've started a web page for the FS-1A, and put the component overlay for the two boards there:
http://www.jhaible.heim.at/fs1a/fs1a.html
Feel free to ask questions when you're putting together a preliminary BOM.
Some values aren't determined yet; the majority of parts is, however.
JH. |
Great, I'll get on it. Are the I/O headers MTA100? I'm guessing so, and the larger power header is MTA156 MOTM/Blacet style. |
They are from Reichelt, and have a different name, but they seem to have the same spacing: 2.54mm from pin to pin.
Plus, one MOTM connector and one Synthesizers.com connector.
JH. _________________ "I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f) |
|
Back to top
|
|
|
cbm
Joined: Oct 25, 2005 Posts: 381 Location: San Francisco
|
Posted: Thu Sep 06, 2007 9:48 am Post subject:
|
|
|
jhaible wrote: | They are from Reichelt, and have a different name, but they seem to have the same spacing: 2.54mm from pin to pin.
|
The decimal inch rears its head, again. These are .1" centers.
I used to receive an unfinished furniture catalog that had printed at the bottom of every page: "Metric is Un-American." I kid you not.
-C |
|
Back to top
|
|
|
xpmtl
Joined: Aug 10, 2007 Posts: 162 Location: Brussels, Belgium
|
Posted: Fri Sep 07, 2007 5:28 pm Post subject:
|
|
|
Well, I'm in for two set of boards.
Thanks
X _________________ http://sdiy.xpmtl.net |
|
Back to top
|
|
|
egon77
Joined: Dec 08, 2006 Posts: 10 Location: Fullerton, CA
|
Posted: Sun Sep 30, 2007 11:04 am Post subject:
|
|
|
I would also love to be in for one set please. |
|
Back to top
|
|
|
Serenadi
Joined: Jul 03, 2007 Posts: 89 Location: Germany
|
Posted: Mon Oct 01, 2007 12:13 am Post subject:
|
|
|
jhaible wrote: | They are from Reichelt, and have a different name, but they seem to have the same spacing: 2.54mm from pin to pin. |
Yes, they called PSK254 and fit as well as MTA100.
PSK-Contacts have to be ordered seperatly, search for 'PSK Kontakte', 'PSK 254' and 'PSS 254' (headers) at Reichelt. |
|
Back to top
|
|
|
Master of Circles
Joined: Jun 27, 2007 Posts: 14 Location: Hamburg
|
Posted: Sun Oct 21, 2007 6:19 am Post subject:
shifter |
|
|
Hi there,
great, Project number three from Haibles PCB Shop
I definately take one board, maybe I´ll order two, it depends on the price.
Thanks in advance,
Master of Circles |
|
Back to top
|
|
|
ericcoleridge
Joined: Jan 16, 2007 Posts: 889 Location: NYC
|
Posted: Mon Oct 22, 2007 11:54 am Post subject:
|
|
|
I'm not sure if it's time to say so, but I would like to be included on the order list for 1 board.
I'm currently populating my Tau Phaser PCB as well, and I'm very pleased with the quality of this board. Thank you! |
|
Back to top
|
|
|
johans121
Joined: Jun 19, 2007 Posts: 178 Location: Huntsville, AL (USA)
|
Posted: Mon Nov 05, 2007 11:09 am Post subject:
|
|
|
Is it too late to be added to the list?
If not, I want two.
-Jim |
|
Back to top
|
|
|
|