midioxse how to send sysex

[amnesia]

Hi all

sorry never done this before
I have midi in and out connected to the A6 from my Presonus Firepod.
I have opened the MIDI OX program and can see that ins and outs are active by hitting a key on synth keyboard.
I am in USER bank....i open Sysex Scratchpad - file - send sys file - open a sys file and it says it is sending it but i cant see it on the A6?
i can work most things out in life but this has me stumped!

[amnesia]

ok i seem to have 16 programs loaded, can see how i did that as i didnt choose them????

When i try to transfer a larger file I always get the error
Sysex output Devices port is transmitting data wait and try again...I assume this means that info is being transmitted ? but how can i see when it is completed?

[amnesia]

ok i found out that the first 16 programs were changing and then there would be others i had loaded all over the place!

Is there a way to say i want this sound loaded here via sysex?

still cant work out the error message seem to happen with all larger sound files??????

[blue hell]

[invalidbuffalo]

I had this same problem. The solution is to go to Sysex->Configure in the scratchpad and set the delay between buffers to 120ms and delay after F7 to 120 ms.

Hope this helps