Author |
Message |
The Alison Project
Joined: Jul 21, 2006 Posts: 187 Location: Canada
Audio files: 2
|
Posted: Sun May 11, 2008 6:31 pm Post subject:
What CGS modules have you built |
|
|
I will start it off and let you all see how insane I am for Ken's circuits. If any one has questions they could not find answers for on any specific modules, ask away.
CGSRR Real Ring Modulator
CGS03 Psycho LFO x2 (different speeds)
CGS04 DC Mixer (plus a few built into filters etc)
CGS06 Burst Generator x2
CGS07 Gate Sequencer (with addition buffer + switch board)
CGS09 VC Divider
CGS13 Gated Comparator
CGS18 Drum Simulator
CGS19 Chime/Bell Simulator
CGS21 Super Psycho LFO
CGS22 Master Divider V1
CGS23 CV Mega Mixer
CGS26 Analogic
CGS28 Sequential Switch
CGS29 Wave Multiplier
CGS31 Digital Noise
CGS32 Infinite Melody w/ CGS41 Diatonic Conveter
CGS33 Matrix Mixer
CGS34 Analog Shift Register x2
CGS35 Steiner VCF
CGS36 Pulse Divider w/ CGS54 XOR XNOR Logic
CGS37 CV Cluster
CGS38 Saw Pitch Shifter
CGS39 Logic (4 AND, 4 OR, 4 XOR, 8 Inverters)
CGS40 Modulo Magic
CGS47 Cynare Drum Sim
CGS50 Morph Lag x2
CGS52 Lockhart Wave Folder x2
CGS55 Analog Switch Matrix w/ CGS51 Weighted Random Switch
CGS57 Bi-N-Tic Filter
CGS58 Utility LFO
CGS59 Programmer Sequencer (16 steps)
CGS62 Slope Detector x2
CGS65 Tube VCA x2 _________________ -
The Alison Project
www.thealisonproject.com
www.myspace.com/theyakuzacowboys Last edited by The Alison Project on Mon May 19, 2008 5:44 pm; edited 1 time in total |
|
Back to top
|
|
|
Peake
Joined: Jun 29, 2007 Posts: 1113 Location: Loss Angeles
Audio files: 3
|
Posted: Sun May 11, 2008 7:06 pm Post subject:
|
|
|
I stuffed dozens of his boards a while back for someone else, but currently have two tube VCAs that I cannot get to work for some reason. I must have repeated a mistake on both boards, although I followed the layout photo. No sound at all unless I touch the 072's traces. Power connections and amounts are correct.
Edit: Corrected through the installation of the "Second Choice" tubes. Huzzah!
You are a Stone madman, Allison Project! Last edited by Peake on Fri Jun 06, 2008 5:47 pm; edited 1 time in total |
|
Back to top
|
|
|
lanxe
Joined: Feb 24, 2005 Posts: 102 Location: Columbus, OH - Now Carson City NV
|
Posted: Sun May 11, 2008 8:18 pm Post subject:
|
|
|
i built these:
2 x cgs vca
1 x 8 stage cgs programmer/sequencer
2 x cgs vco (still having issues with them right now)
1 x cgs steiner vcf
2 x cgs cv mega mixer
2x cgs psycho lfo
Ryan |
|
Back to top
|
|
|
johans121
Joined: Jun 19, 2007 Posts: 178 Location: Huntsville, AL (USA)
|
Posted: Sun May 11, 2008 10:15 pm Post subject:
|
|
|
I've built a bi'n'tic filter/oscillator and 4 tube vcas (cgs65).
I currently have 2 vco's, 1 sub-osc, and 2 steiners in the pipeline.
-Jim
*edit, beer + forums = typos Last edited by johans121 on Mon May 12, 2008 6:38 am; edited 1 time in total |
|
Back to top
|
|
|
neandrewthal
Joined: May 11, 2007 Posts: 672 Location: Canada
|
Posted: Mon May 12, 2008 1:20 am Post subject:
|
|
|
So far:
Psycho Lfo.
Bare PCBs:
DC Mixer x 4
Gated Comparator
Burst Generator
Analog Logic
VC Divider
Pulse Dividers
Suboscillator
XOR XNOR
BiNTic
VCO
Wave Multipliers
Digital Noise _________________ " I went through quite a few trannies til I found one I liked" - Wild Zebra |
|
Back to top
|
|
|
Pehr
Joined: Aug 14, 2005 Posts: 1307 Location: Björkvik, Sweden
Audio files: 2
|
|
Back to top
|
|
|
RF
Joined: Mar 23, 2007 Posts: 1502 Location: Northern Minnesota, USA
Audio files: 28
|
Posted: Mon May 12, 2008 5:37 am Post subject:
|
|
|
I built these CGS circuits on perfboard....
CGS03 Psycho LFO
CGS06 Burst generator (x2)
CGS07 Gate Sequencer
CGS42 Gate Seq. CV Adapter
CGS10 Pedal board/Mini Keyboard
CGS13 Gated Comparator
CGS18 Drum simulator (x4)
CGS24 Gate to Trigger Converter (Lots)
CGS30 Band pass filter (x2)
CGS35 Steiner VCF
CGS36 Pulse Divider
CGS52 Simple Wave Folder
CGS54 XOR XNOR logic
CGS62 Slope Detector
CGSLD LED driver (Lots)
I'm preparing to order several boards from him.....
Thanks fro sharing these, Ken!
bruce |
|
Back to top
|
|
|
Funky40
Joined: Sep 24, 2005 Posts: 875 Location: Swiss
Audio files: 1
G2 patch files: 5
|
Posted: Mon May 12, 2008 12:51 pm Post subject:
|
|
|
i have this ones running:
2x CGS 65 Tube VCA ( a third one is not running )
1x CGS 28 Sequential switch ( 3 more Boards populated ) ( Two will give a 8x8 trrigger sequenzer )
1x CGS 36 Pulse divider ( Two more halfways populated last week)
1x CGS 64 VCA, built with SSM2210 ( lost interest, have some more Boards )
1x CGS 52 sinple Wavefolder
1x CGS 29 Wavemultipliers ( this has Issues on the Pulse Knobs ) ( a second one is populated )
1x CGS 31 digital Noise ( has Issues, I can just use white and pink Noise )
2x CGS 24 Gate to Trigger converter ( just populated two more last week )
1x CGS 58 Utility LFO ( just one side wired up, lost interest, have 3 Boards more populated )
1x Psycho LFO ( not wired up, lost interest ) ( i need LFOs with reset inputs )
1x CGS 26 analogic, just populated last Week
not running:
2x CGS 60 Stompbox adapter
on the wish list:
all Drum modules, and some other stuff |
|
Back to top
|
|
|
sneakthief
Joined: Jul 24, 2006 Posts: 569 Location: Berlin
|
Posted: Tue May 13, 2008 12:10 am Post subject:
|
|
|
CGSLD LED drivers
CGS01 Sub-oscillator/harmonic sequencer
CGS03 Psycho LFO
CGS06 Burst Generator
CGS13 Gated Comparator
CGS28 Sequential Switch
CGS29 Wave Multiplier
CGS35 Steiner VCF
CGS57 Bi-N-Tic Filter
CGS58 Utility LFO
and I plan on getting the Tube VCA soon _________________ Sneak-Thief - raw electrofunk |
|
Back to top
|
|
|
zthee
Joined: Feb 20, 2008 Posts: 414 Location: Stockholm
|
Posted: Tue May 13, 2008 12:51 am Post subject:
|
|
|
I've built the following
CGS04 - mixer
CGS24 - Gate to trigger
CGS29 - Wave multipliers
CGS34 - ASR
CGS35 - Steiner
And I'm gonna order the following in june
CGS01 - Sub osc
CGS03 - Psycho LFO
CGS26 - Analog Logic
CGS28 - Seq. switch
CGS31 - Digital noise
CGS36 - Pulse divider
CGS64 - VCA
CGS66 - PSU
I need more CGS modules! |
|
Back to top
|
|
|
fonik
Joined: Jun 07, 2006 Posts: 3950 Location: Germany
Audio files: 23
|
Posted: Tue May 13, 2008 12:52 am Post subject:
|
|
|
the very first module i ever built was the
psycho LFO (added a LED in meantime), then
two dc mixers
two passive ringmods
wavemultiplier
vc divider
utility LFO
b'n'tic VCO/F
harmonic suboscillator _________________
cheers,
matthias
____________
Big Boss at fonitronik
Tech Buddy at Random*Source |
|
Back to top
|
|
|
Scott Stites
Janitor
Joined: Dec 23, 2005 Posts: 4127 Location: Mount Hope, KS USA
Audio files: 96
|
Posted: Wed May 14, 2008 2:59 pm Post subject:
|
|
|
IIRC, my first ever module was the Wave Multiplier - I've got bunches of Stone, built and un-built. But, that Wave Multiplier hardly ever goes unused in a patch. Holy Mackeral, I love that thing! _________________ My Site |
|
Back to top
|
|
|
krisp14u
Joined: Nov 11, 2006 Posts: 206 Location: uk
|
Posted: Thu May 15, 2008 4:55 am Post subject:
|
|
|
I have built and working with panels
CGS21 Super Psycho LFO (fun fun fun)
CGS29 Wave Multiplier
CGS33 Matrix Mixer
CGS52 Lockhart Wave Folder
CGS57 Bi-N-Tic Filter (this is a must build i will make another soon)
CGS59 Programmer Sequencer (8 steps) (needs a front panel)
CGS65 Tube VCA x2 (everything must go through one of these )
part built or to build soon
CGSRR Real Ring Modulator
CGS09 VC Divider
CGS34 Analog Shift Register
CGS57 Bi-N-Tic Filter ( I need another)
CGS65 Tube VCA x2 (I hope 4 will be enough ) _________________ Cheers
Paul Darlow
www.krisp1.com Last edited by krisp14u on Tue Jul 29, 2008 10:41 am; edited 2 times in total |
|
Back to top
|
|
|
andrewF
Joined: Dec 29, 2006 Posts: 1176 Location: australia
Audio files: 4
|
Posted: Thu May 15, 2008 8:29 am Post subject:
Re: What CGS modules have you built |
|
|
The Alison Project wrote: | I will start it off and let you all see how insane I am for Ken's circuits. If any one has questions they could not find answers for on any specific modules, ask away.
CGSRR Real Ring Modulator
CGS03 Psycho LFO x2 (different speeds)
.
.
.
.
CGS62 Slope Detector x2
CGS65 Tube VCA x2 |
What !?! No VCOs? |
|
Back to top
|
|
|
ericcoleridge
Joined: Jan 16, 2007 Posts: 889 Location: NYC
|
Posted: Thu May 15, 2008 10:14 am Post subject:
|
|
|
Several DC Mixers
A couple CV Mega Mixers
Several LED Drivers
a couple Gate to Trig Blocks
Analog Shift Register
a Couple Slope Detectors
a couple Morph Lags
Sequential Switch
Burst Generator
Wave Multiplier
Sub-Oscillator
Pulse Divider and Logic
Waiting to be built:
Cynare
Drum Simulator |
|
Back to top
|
|
|
The Alison Project
Joined: Jul 21, 2006 Posts: 187 Location: Canada
Audio files: 2
|
Posted: Thu May 15, 2008 9:57 pm Post subject:
Re: What CGS modules have you built |
|
|
andrewF wrote: |
What !?! No VCOs? |
Yeah not yet, I'm good for VCO's right now. When I need another VCO thou I am giving the CGS one a shot, full version. _________________ -
The Alison Project
www.thealisonproject.com
www.myspace.com/theyakuzacowboys |
|
Back to top
|
|
|
andrewF
Joined: Dec 29, 2006 Posts: 1176 Location: australia
Audio files: 4
|
Posted: Mon May 19, 2008 5:36 pm Post subject:
|
|
|
guess I'm up there in AlisonProject territory
CGSLD LED driver lots
CGSRR Real Ring Modulator (3 diy)
CGS01 Sub oscillator 2
CGS02 Wavetable 2
CGS03 Psycho LFO 2
CGS04 Mixer 8 (2 joystick controllers)
CGS06 Burst generator 1
CGS07 Gate Sequencer (3 board set) 1
CGS07P Gate Sequencer Preset board 1
CGS08 V8 simulator 1
CGS09 Voltage Controlled Divider 2
CGS10 Pedal board/Mini Keyboard 1
CGS12H Display Adapter - 2
CGS13 Gated Comparator 2
CGS18 Drum simulator 2
CGS19 Chime/bell simulator 2
CGS21 Super Psycho Modulation source 3
CGS22 Master Divider 2
CGS23 CV Mega Mixer 1
CGS24 Gate to Trigger Converter 2
CGS26 Analog Logic voltage processor 2
CGS27 7 pin tube experimenter board 3
CGS28 Sequential Switch 2
CGS29 Wave Multipliers 1
CGS30 Band pass filter 2
CGS31 Digital Noise 1
CGS32 Infinite melody 1
CGS33 Matrix Mixer 1
CGS34 Analog Shift Register 3
CGS35 Steiner VCF 2
CGS36 Pulse Divider 2
CGS37 CV Cluster 1
CGS38 Saw Pitch Shifter/Wave Multiplier 1
CGS39 Quad logic gate 2
CGS40 Modulo Magic 1
CGS41 Diatonic Converter 1
CGS42 Gate Seq. CV Adapter 1
CGS43 Cascade Mixer 1
CGS45 Dome Filter. 3
CGS47 Cynare drum sim. 1
CGS48 VCO. 13
CGS50 Harry's Morph-Lag 1
CGS51 Weighted Random Switch 1
CGS52 Simple Wave Folder. 3
CGS55 Analog Switch Matrix. 1
CGS56 Gate Converter 1
CGS57 Bi-N-Tic Filter. 2
CGS58 Utility LFO. 2
CGS59B/4xA Programmer/Sequencer 1
CGS62 Slope Detector. 2
CGS64 VCA. 4
CGS65 Tube VCA 2 |
|
Back to top
|
|
|
RF
Joined: Mar 23, 2007 Posts: 1502 Location: Northern Minnesota, USA
Audio files: 28
|
Posted: Mon May 19, 2008 6:34 pm Post subject:
|
|
|
andrewF wrote: |
CGS48 VCO. 13
|
VCO's!
I am not worthy......
bruce |
|
Back to top
|
|
|
The Alison Project
Joined: Jul 21, 2006 Posts: 187 Location: Canada
Audio files: 2
|
|
Back to top
|
|
|
Scott Stites
Janitor
Joined: Dec 23, 2005 Posts: 4127 Location: Mount Hope, KS USA
Audio files: 96
|
Posted: Mon May 19, 2008 6:43 pm Post subject:
|
|
|
That modulo magic thread sure got me to thinking about that one..... _________________ My Site |
|
Back to top
|
|
|
andrewF
Joined: Dec 29, 2006 Posts: 1176 Location: australia
Audio files: 4
|
Posted: Mon May 19, 2008 7:45 pm Post subject:
|
|
|
The Alison Project wrote: |
I'd be interested to see what you did with the Dome Filter.
|
frequency shifter - the panel is set up to be patched as I like, or use each section as a stand-alone module - it also has 6 ring mods (4 - 1496 based, 2 passive), 2 quad oscillators, a CGS VCO and the rest from Electronotes.
to be honest, I have never got around to tuning it properly, it makes plenty of weird noises as is. One day i will sit down with some set-up instructions and a 'scope to sort it.
It is one project I would like to re-do sometime - requiring more Dome filter PCBs. If enough people are keen, we might be able to convince Ken to do another run.
You would also need Electronotes to see the schematic - it is in the Preferred Circuits collection ( ~$30 or so ).
|
|
Back to top
|
|
|
The Alison Project
Joined: Jul 21, 2006 Posts: 187 Location: Canada
Audio files: 2
|
Posted: Tue May 20, 2008 2:05 pm Post subject:
|
|
|
andrewF wrote: |
frequency shifter - the panel is set up to be patched as I like, or use each section as a stand-alone module - it also has 6 ring mods (4 - 1496 based, 2 passive), 2 quad oscillators, a CGS VCO and the rest from Electronotes.
to be honest, I have never got around to tuning it properly, it makes plenty of weird noises as is. One day i will sit down with some set-up instructions and a 'scope to sort it.
It is one project I would like to re-do sometime - requiring more Dome filter PCBs. If enough people are keen, we might be able to convince Ken to do another run.
You would also need Electronotes to see the schematic - it is in the Preferred Circuits collection ( ~$30 or so ).
|
Very Impressive. Andrew I just realized who you are, I have spent alot of time drooling at the pics on your webpage. When I first started building CGS stuff I would look all the time to what panel components you were using etc etc (well trying, that crazy artwork can be hard to read). _________________ -
The Alison Project
www.thealisonproject.com
www.myspace.com/theyakuzacowboys |
|
Back to top
|
|
|
otherunicorn
Joined: May 11, 2008 Posts: 136 Location: Australia
|
Posted: Wed May 21, 2008 1:28 am Post subject:
|
|
|
I hate to boast, but I've built all of them
Of course the correct response to this is "I should sincerely hope so!" _________________ http://www.cgs.synth.net/ |
|
Back to top
|
|
|
johans121
Joined: Jun 19, 2007 Posts: 178 Location: Huntsville, AL (USA)
|
Posted: Wed May 21, 2008 6:51 am Post subject:
|
|
|
Well, I should sincerely hope so! |
|
Back to top
|
|
|
Luka
Joined: Jun 29, 2007 Posts: 1003 Location: Melb.
|
Posted: Sun Jun 15, 2008 3:36 am Post subject:
|
|
|
i just finihsed my VCO, utilty LFO, psycho LFO, digial noise, real ring module
i have a steiner vcf on the bench that has some wack problem
so happy
this is the first analogue VCO ive had
it sounds unbelievable
these are my first completed modules woohoo
got so many more to do now
the cgs modules left to come are
2 x tube VCA
1 x VCA
1 x wavemult
3 x dc mixer
thanks ken and laurie!! _________________ problemchild
melbourne australia
http://cycleofproblems.blogspot.com/
http://www.last.fm/user/prblmchild |
|
Back to top
|
|
|
|