Author |
Message |
fonik
Joined: Jun 07, 2006 Posts: 3950 Location: Germany
Audio files: 23
|
Posted: Mon Jan 26, 2009 10:10 am Post subject:
|
|
|
TekniK wrote: | Matthias,how does the VC has been implemented on the panner?
symmetrical,asymmetrical and what are the voltages?
Regards |
the board basicly contains 4 differential pair based VCA with linear response.
i am not quite sure about the term (a)symmetrical. i fear i know what you mean. since the VCAs response to positive CV, and two of the VCAs are fed by inverted CVs without any offset, there is alway a attenuation of the signal during the fade.
in the context of the PS3100 it doesn't matter at all, since there is always the center channel present. you may recognize the effect more clearly, when only left and right input are used. rehear the soundsamples, you will recognize what i mean. as said before, the x-panner is an extension board in first degree. however, you can decide based on the soundsamples yourself.
hope that helps. _________________
cheers,
matthias
____________
Big Boss at fonitronik
Tech Buddy at Random*Source |
|
Back to top
|
|
|
TekniK
Joined: Aug 10, 2008 Posts: 1059
|
Posted: Mon Jan 26, 2009 11:44 am Post subject:
|
|
|
Thank u for your reply Matthias,its all clear. |
|
Back to top
|
|
|
fonik
Joined: Jun 07, 2006 Posts: 3950 Location: Germany
Audio files: 23
|
Posted: Thu Jan 29, 2009 5:17 pm Post subject:
|
|
|
hi all,
i am not finished with updating the list with advance orders, sorry.
however, today i got aware that the german postal service changed their prices for international mails. they became a little bit undescent lately, i'd say. so i have to change the pricing for international shipping according to the new circumstances.
if you don't feel comfortable with it and want to change you advance order, don't hesitate to contact me again.
PRICING:
(under the assumption of minimum advance orders for 50 PCB each):
PS3100 PCB 13.-USD/10.-EUR
X-Panner PCB 10.-USD/7.50EUR
+ packaging & postage
1 PCB 4.-USD, more than 1 PCB 8.-USD worldwide
3.- EUR europe
2.- EUR deutschland _________________
cheers,
matthias
____________
Big Boss at fonitronik
Tech Buddy at Random*Source |
|
Back to top
|
|
|
machine.cuisine
Joined: Jul 20, 2007 Posts: 61 Location: ks
Audio files: 4
|
Posted: Thu Jan 29, 2009 7:27 pm Post subject:
|
|
|
Fonik, I would like 1 Resonator PCB and 2 X-panfader PCBs.
(I believe I already requested one of each PCB - but I would like to update)
|
|
Back to top
|
|
|
LektroiD
Joined: Aug 23, 2008 Posts: 1018 Location: Scottish Borders
Audio files: 2
G2 patch files: 2
|
Posted: Thu Jan 29, 2009 8:26 pm Post subject:
|
|
|
To reiterate, my order is for one of each (1x reso / 1x panner). When you're ready can you invoice me the total with shipping to the UK.
Many thanks _________________ LektroiD |
|
Back to top
|
|
|
numbertalk
Joined: May 05, 2008 Posts: 992 Location: Austin, TX
Audio files: 5
|
Posted: Thu Jan 29, 2009 8:29 pm Post subject:
|
|
|
Hi Fonik
Just to confirm I'm still in for 2 Resonator boards and 4 Panner boards. |
|
Back to top
|
|
|
ericcoleridge
Joined: Jan 16, 2007 Posts: 889 Location: NYC
|
Posted: Fri Jan 30, 2009 11:57 am Post subject:
|
|
|
I'd like 4 X-Panner PCBs please. Final answer.
Thanks Fonik. |
|
Back to top
|
|
|
asafnetzer
Joined: Jun 16, 2007 Posts: 112 Location: Israel
|
Posted: Sat Jan 31, 2009 12:37 pm Post subject:
|
|
|
If I haven't written it yet, I'm in for 1 Reso and 2 X-Panner Boards.
Thanks |
|
Back to top
|
|
|
lexvortex
Joined: May 14, 2008 Posts: 155 Location: Toronto
|
Posted: Sat Jan 31, 2009 4:03 pm Post subject:
|
|
|
Hi Fonik,
I'd be interested in one or two panner/fader boards depending on how much panel space they take up. From what I can tell is there are two inputs and two outputs, plus mono out, plus a CV in and a pot to manual control the pan/fade, is that correct?
Thanks,
Dave |
|
Back to top
|
|
|
julianw
Joined: Jul 30, 2007 Posts: 78 Location: UK
|
Posted: Sun Feb 01, 2009 8:59 am Post subject:
|
|
|
Hi Fonik,
If its not too late, I'd like to order 1 x Resonator PCB and 1 x panfader PCB.
Thanks |
|
Back to top
|
|
|
fonik
Joined: Jun 07, 2006 Posts: 3950 Location: Germany
Audio files: 23
|
Posted: Sun Feb 01, 2009 10:44 am Post subject:
|
|
|
not too late. there is no deadline yet. _________________
cheers,
matthias
____________
Big Boss at fonitronik
Tech Buddy at Random*Source |
|
Back to top
|
|
|
fonik
Joined: Jun 07, 2006 Posts: 3950 Location: Germany
Audio files: 23
|
Posted: Mon Feb 02, 2009 12:56 am Post subject:
|
|
|
lexvortex wrote: | I'd be interested in one or two panner/fader boards depending on how much panel space they take up. From what I can tell is there are two inputs and two outputs, plus mono out, plus a CV in and a pot to manual control the pan/fade, is that correct? |
the X-panner board provides following I/Os
- 3(!) audio inputs (left, center, right)
- 2 audio outputs (left, right - the mono output is from the resonators)
- 1 potentiometer (manual spread)
- 2 CV inputs (one with on/off switch)
- 2 connectors for the PS3100 resonators (power and audio)
hope that helps.
i did not plan to do this PCBs almost at the same time as the TH SCM, therefor the documentation is not finished yet. sorry.
[edited for clarity] _________________
cheers,
matthias
____________
Big Boss at fonitronik
Tech Buddy at Random*Source |
|
Back to top
|
|
|
sandyb
Joined: Jun 06, 2008 Posts: 2 Location: Ireland
|
Posted: Mon Feb 02, 2009 10:54 am Post subject:
|
|
|
hi Fonik
i'd like 2 of each board please
sandy |
|
Back to top
|
|
|
koura
Joined: Feb 02, 2009 Posts: 13 Location: chicago
|
Posted: Mon Feb 02, 2009 12:32 pm Post subject:
me too |
|
|
Fonik,
I am down for 2 boards of each design.
I'm in the US. brian at koura dot us
thank you,
b. |
|
Back to top
|
|
|
astroschnautzer
Joined: May 22, 2008 Posts: 31 Location: FINLAND
|
Posted: Tue Feb 03, 2009 1:36 am Post subject:
|
|
|
I would be down for 1 reso and 1 panning x-fade board. |
|
Back to top
|
|
|
lexvortex
Joined: May 14, 2008 Posts: 155 Location: Toronto
|
Posted: Tue Feb 03, 2009 8:35 pm Post subject:
1st attempt at the panner panel |
|
|
Hi,
Here is my first version of a 1U MOTM panel for the panner/fader.
Cheers,
Dave
Description: |
|
Filesize: |
18.76 KB |
Viewed: |
213 Time(s) |
This image has been reduced to fit the page. Click on it to enlarge. |
|
Description: |
|
Download |
Filename: |
Panner.fpd |
Filesize: |
2.39 KB |
Downloaded: |
179 Time(s) |
Last edited by lexvortex on Mon Feb 16, 2009 5:47 pm; edited 1 time in total |
|
Back to top
|
|
|
dave_3283
Joined: Jan 30, 2009 Posts: 28 Location: Dallas TX
|
Posted: Fri Feb 06, 2009 7:39 am Post subject:
+2 3100s |
|
|
I would like 2 3100 PCBs, please.
Thanks-
dave |
|
Back to top
|
|
|
LektroiD
Joined: Aug 23, 2008 Posts: 1018 Location: Scottish Borders
Audio files: 2
G2 patch files: 2
|
Posted: Sat Feb 07, 2009 7:45 pm Post subject:
|
|
|
Hi, I realised I made a mistake on my requirements, I would like 2x panner and 1x resonator, if this is possible. Thanks _________________ LektroiD |
|
Back to top
|
|
|
wmonk
Joined: Sep 15, 2008 Posts: 528 Location: Enschede, the Netherlands
Audio files: 15
|
Posted: Sun Feb 08, 2009 3:18 am Post subject:
|
|
|
Hi Fonik,
1 resonator and 1 panner for me
Thank you,
Wmonk |
|
Back to top
|
|
|
Danno Gee Ray
Joined: Sep 25, 2005 Posts: 1351 Location: Telford, PA USA
|
Posted: Sun Feb 08, 2009 10:44 am Post subject:
|
|
|
I would like to be in for 1 Panner and 1 Resonator.
Thank you |
|
Back to top
|
|
|
fonik
Joined: Jun 07, 2006 Posts: 3950 Location: Germany
Audio files: 23
|
Posted: Mon Feb 09, 2009 1:42 am Post subject:
|
|
|
i am taking advance orders until 27 FEB 09, then the files will be sent to the manufacturer - i will order some spares, though.
i will PM everyone concerning payment as soon as the PCBs arrived at my door. BTW everyone who placed an order whould have received a PM by now.
some of you already ordered TH SCM PCBs. in these cases i could hold the SCM PCBs until the PS3100/panner PCBs are in to send them together, thus saving you some postage -and causing me some logistic nightmare . however i would have to call for seperate payment for the SCM PCBs when they are in: it has not been my plan to do these PCBs in that timely manner in the first place, just because of all the upfront payment i have to do. somehow it just happened.
send me a PM if you want to have it this way, please. _________________
cheers,
matthias
____________
Big Boss at fonitronik
Tech Buddy at Random*Source |
|
Back to top
|
|
|
bugfight
Joined: Aug 02, 2007 Posts: 188 Location: Arlington, TX USA
|
Posted: Mon Feb 09, 2009 10:22 am Post subject:
|
|
|
i'd like 2 of each, please.
and you can send them with the scm if it's not too nightmarish... |
|
Back to top
|
|
|
crashlander42
Joined: Oct 21, 2006 Posts: 292 Location: Orlando, FL (US)
|
|
Back to top
|
|
|
droffset
Joined: Feb 02, 2009 Posts: 515 Location: London area
Audio files: 2
|
Posted: Tue Feb 10, 2009 4:04 pm Post subject:
|
|
|
One of each for me please. |
|
Back to top
|
|
|
henrikgo
Joined: Jul 05, 2008 Posts: 40 Location: sweden
|
Posted: Wed Feb 11, 2009 4:49 pm Post subject:
|
|
|
One of each please! |
|
Back to top
|
|
|
|