electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
Live streaming at radio.electro-music.com

  host / artist show at your time
  EdisonRex Edison's Electronic Review
Please visit the chat
 Forum index » Clavia Nord Modular » Nord Modular G2 Discussion
work-around for sequencer delayed rst input?
Post new topic   Reply to topic Moderators: Nord Modular Editors
Page 1 of 1 [5 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
motorik



Joined: Feb 06, 2009
Posts: 3
Location: Northern California

PostPosted: Fri Feb 06, 2009 11:20 pm    Post subject: work-around for sequencer delayed rst input? Reply with quote  Mark this post and the followings unread

I'm working on some keyboard-triggered sequencer stuff, and am trying to get the first step of the sequence when I hit a note. Unfortunately, the delayed reset thing really wants me to get the second step of the sequence. The best work-around I've gotten is to run the gate signal into the 'park' input, and then through a logic delay into the 'rst' input. While this works, I suspect there's a better way of doing it, and have tried all sorts of things with flipflops and s&h but seem to be missing something obvious. I'm sure this is a common issue ... suggestions?
Back to top
View user's profile Send private message
iPassenger



Joined: Jan 27, 2007
Posts: 1051
Location: Sheffield, UK
Audio files: 5
G2 patch files: 78

PostPosted: Sat Feb 07, 2009 5:25 pm    Post subject: Reply with quote  Mark this post and the followings unread

This is a rather clumsy solution:

It only works while you press a key but seems to reset properly.

EDIT: I added another version which uses a logic invertor and another AND gate to allow you to only trigger the note once (rather than hold a key).


Note Sync Reset.pch2
 Description:

Download
 Filename:  Note Sync Reset.pch2
 Filesize:  1.42 KB
 Downloaded:  593 Time(s)


Note Sync Rese2.pch2
 Description:

Download
 Filename:  Note Sync Rese2.pch2
 Filesize:  1.47 KB
 Downloaded:  577 Time(s)


_________________
iP (Ross)
- http://ipassenger.bandcamp.com
- http://soundcloud.com/ipassenger
Back to top
View user's profile Send private message Visit poster's website
motorik



Joined: Feb 06, 2009
Posts: 3
Location: Northern California

PostPosted: Sun Feb 08, 2009 11:44 pm    Post subject: Reply with quote  Mark this post and the followings unread

For whatever reason I can't attach documents with OSX Firefox ... the best solutions I've found so far are here;

http://www.solipsist.org/seq_rst

I'm only triggering notes from the kbd in these.

The first triggers a logic pulse from an incoming gate which goes to the park input, and also through a short delay into the rst input. The second, and better method, also sends a short logic pulse to 'park,' but the delayed reset is done by a second logic pulse clocked by the negative edge of the first pulse.

The best solution would be something that takes the positive edge of the incoming gate and sends it to two logic pulse objects in sequence, on subsequent control rate system sample intervals, which go to the sequencer's park and reset inputs respectively. I suspect the sequencer 'park' input might not be designed to handle this sort of thing.

Ideally, there would be a non-delayed sync input, but oh well.
Back to top
View user's profile Send private message
Antimon



Joined: Jan 18, 2005
Posts: 3730
Location: Sweden
Audio files: 275
G2 patch files: 96

PostPosted: Mon Feb 09, 2009 11:06 am    Post subject: Reply with quote  Mark this post and the followings unread

Is this what you're after? I tweaked your delay example so that the keyboard gate triggers a pulse that goes into both the rst and the clk input.

/Stefan


clock_and_rst.pch2
 Description:

Download
 Filename:  clock_and_rst.pch2
 Filesize:  1.52 KB
 Downloaded:  691 Time(s)


_________________
Antimon's Window
@soundcloud @Flattr home - you can't explain music
Back to top
View user's profile Send private message Visit poster's website
motorik



Joined: Feb 06, 2009
Posts: 3
Location: Northern California

PostPosted: Tue Feb 10, 2009 12:24 am    Post subject: Reply with quote  Mark this post and the followings unread

After running some tests against other synchronized material, I think clocking the reset on the negative edge of a short logic pulse to the 'park' input works the best. I'm sure there are more theoretically perfect solutions used by uber logic guys, but it seems to work well from a practical standpoint. Thanks much for the responses, and taking time to post patches ... seeing other people's solutions is a huge help.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic Moderators: Nord Modular Editors
Page 1 of 1 [5 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » Clavia Nord Modular » Nord Modular G2 Discussion
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use