electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » Clavia Nord Modular » Nord Modular G2 Discussion
G2 Engine trouble with os 1.24
Post new topic   Reply to topic Moderators: Nord Modular Editors
Page 1 of 1 [4 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
steampump



Joined: Oct 22, 2004
Posts: 76
Location: switzerland
G2 patch files: 14

PostPosted: Fri Oct 22, 2004 9:24 am    Post subject: G2 Engine trouble with os 1.24 Reply with quote  Mark this post and the followings unread

I still work with a Win98se..
I have downloaded os1.24 , after upgrading the engin is beginning to play a demo. I could only stop the demo with the new editor.
...But no midi control is possible anymore (Remote25 or Elka MK55).
I'm trying to verify all midi setting for performance and patch but no midi control is possible. Other side effect ubs is losing connection after some minutes.
I needed to install os1.10 again to make it work ( after checking midi and selecting some performance it works again).
I've made the procedure twice to be sure . It is reacting in same way.
Has somebody else encounter this problem.
Is there a good release between 1.10 and 1.24 and where can i find it ?
www.armuco.ch

_________________
Artworks Music Computer
Back to top
View user's profile Send private message Visit poster's website
jksuperstar



Joined: Aug 20, 2004
Posts: 2491
Location: Denver
Audio files: 1
G2 patch files: 18

PostPosted: Fri Oct 22, 2004 11:13 am    Post subject: Reply with quote  Mark this post and the followings unread

I had a problem updating once:
http://electro-music.com/forum/topic-3358.html

I had a 3 meter cable, and it wouldn't update. I moved to a USB2.0 1 meter cable, and it worked fine.

Now, I used that SAME 1 meter cable on my laptop, and it won't work, the G2 isn't recognized properly. A different cable, however, does work. My laptop has been finicky in the past with these types of things.

So, if you have access to another cable, it may be worth a try. Just guessing, but there may be a higher bandwidth of data in 1.24 vs. 1.10, and that's enough for USB to choke like a NY Yankee in game 7 of the ALCS.
Back to top
View user's profile Send private message Visit poster's website
steampump



Joined: Oct 22, 2004
Posts: 76
Location: switzerland
G2 patch files: 14

PostPosted: Sat Oct 23, 2004 8:36 am    Post subject: usb trouble Reply with quote  Mark this post and the followings unread

I have an addone card so I will try the usb 2.0 later . But i have lost lot of time trying to install the Engine on W98SE. On my first computer drivers could not be installed at all; automatic detection doesn't work, and on both computer the device was not displayed in the list . By miracle on the second computer install begun after 1-2 minutes or more (i was leaving the room for a cup of tea....) Laughing
_________________
Artworks Music Computer
Back to top
View user's profile Send private message Visit poster's website
jksuperstar



Joined: Aug 20, 2004
Posts: 2491
Location: Denver
Audio files: 1
G2 patch files: 18

PostPosted: Sat Oct 23, 2004 10:05 am    Post subject: Reply with quote  Mark this post and the followings unread

I'n not running USB2.0, I just used a USB2.0 grade cable. I had similar problems on WinXP...the G2 wouldn't detect, or it would be detected, but as an "Unknown Device". Either way, it wasn't working. The quality shorter cable solved these issues for me.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic Moderators: Nord Modular Editors
Page 1 of 1 [4 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » Clavia Nord Modular » Nord Modular G2 Discussion
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use