PCBs for a Sequential Analogue Switch

fonik · Posted: Sun Apr 19, 2009 8:06 am Post subject:

i just made a very short sample of the switch in audio range. it is set up as follows: the triangel and sine outputs of my TH8038 VCO are routed to I/O 1 & 2 of the switch that is set to 2 step mode.
1st i switch manually, then i switch with a 2nd VCO/LFO, which is controlled by another LFO then (falling sweeps). after that i clock the switch by the TH8038 VCOs square output, then divided by 2, then by 4 (using my simple clock divider).

http://www.modular.fonik.de/sound/SeqSwitchaudio.mp3
(846kb)

LektroiD · Posted: Sun Apr 19, 2009 8:38 am Post subject:

Drool!

Is the 'zipper noise' avoidable, or is that the point of the module?

TekniK · Joined: Aug 10, 2008 Posts: 1059

Funky40 · Posted: Sun Apr 19, 2009 3:36 pm Post subject:

I take three Boards,
and thanks !

Funky40 · Posted: Sun Apr 19, 2009 3:51 pm Post subject:

fonik · Posted: Mon Apr 20, 2009 3:46 am Post subject:

okay then... now almost everyone should be fine, i think. i added the MTA-156 connector and modified one row of the euro-style ribbon connector to comply with the dotcom standard. the footprints for the beads now have a .039 drill.

SeqSwitchSilkScreen.gif

Description:

Filesize:

56.08 KB

Viewed:

965 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

xpmtl · Joined: Aug 10, 2007 Posts: 162 Location: Brussels, Belgium

Thanks matthias Very Happy

fonik · Posted: Mon Apr 20, 2009 5:03 am Post subject:

i am taking advance orders until 3 MAY 09
then i will send the files to the manufacturer

PRICING:
each PCB 9.-USD/7.-EUR

+ packaging & postage:
1 PCB 4.-USD, more than 1 PCB 8.-USD worldwide
3.- EUR europe
2.- EUR deutschland

PCBs should be available mid-may, i guess.

KrIVIUM2323 · Joined: Jan 01, 2009 Posts: 42 Location: Besancon/France/EU

Count me in for 2 boards please.
Thanks Matthias.

fonik · Posted: Mon Apr 20, 2009 6:25 am Post subject:

BTW, all who indicated interest in this thread so far are on the list. i don't think it is necessary to PM all of you before the boards are in...
however, don't hesitate to contact me in via forum, PM, e-mail or whatever.

adambee7 · Joined: Apr 04, 2009 Posts: 420 Location: united kingdom

I'll take 3 please. Very Happy

Funky40 · Posted: Mon Apr 20, 2009 1:16 pm Post subject:

bubblechamber · Posted: Mon Apr 20, 2009 7:51 pm Post subject:

hi matthias-this looks great. put me down for 2. thanks.
david

simmeau · Posted: Mon Apr 20, 2009 11:50 pm Post subject:

I'll update my order to 2 boards thanks.

fonik · Posted: Mon Apr 20, 2009 11:55 pm Post subject:

you're welcome.

fluxmonkey · Joined: Jun 24, 2005 Posts: 708 Location: cleve

2 for me, please and thank you!

bbob

billy pilgrim · Joined: Feb 12, 2008 Posts: 36 Location: nyc

I'll tke 1 board, thanks...

... billy pilgrim

Luka · Joined: Jun 29, 2007 Posts: 1003 Location: Melb.

matthias did you have a BOM for this?
just doing some ordering now

fonik · Posted: Tue Apr 28, 2009 3:03 am Post subject:

here's the raw, unedited BOM. hope that helps. the actual building docs will be published before i mail out the boards.

SeqSwitchBOM_raw.pdf

Description:

Download

Filename:

SeqSwitchBOM_raw.pdf

Filesize:

45.65 KB

Downloaded:

1377 Time(s)

DGTom · Posted: Thu Apr 30, 2009 5:09 am Post subject:

Please put me down for 2 boards as well Very Happy

gwaidan · Joined: Mar 07, 2009 Posts: 53 Location: Sydney, Australia

Please put me down for 2 boards!

dave_3283 · Joined: Jan 30, 2009 Posts: 28 Location: Dallas TX

I would like two.

Thanks-
dave

LektroiD · Posted: Thu Apr 30, 2009 4:36 pm Post subject:

Paid for one board. Looking forward to yet another quality project.

Many thanks.

303monkey · Joined: Mar 11, 2008 Posts: 65 Location: NODNOL

i'll be up for two

LektroiD · Posted: Sat May 02, 2009 5:21 pm Post subject: