electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
Live streaming at radio.electro-music.com

  host / artist show at your time
  EdisonRex Edison's Electronic Review
Please visit the chat
 Forum index » DIY Hardware and Software » Jürgen Haible designs
Photos of what you've built with JH PCBs
Post new topic   Reply to topic Moderators: Scott Stites
Page 6 of 9 [207 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Goto page: Previous 1, 2, 3, 4, 5, 6, 7, 8, 9 Next
Author Message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Fri May 14, 2010 10:38 am    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
A few of the JH modules I've built as stand alone 1U FX units. ]


Very classy, nice built!
Back to top
View user's profile Send private message
adambee7



Joined: Apr 04, 2009
Posts: 420
Location: united kingdom

PostPosted: Fri May 14, 2010 10:46 am    Post subject: Reply with quote  Mark this post and the followings unread

They are class 2thick4uni. Very Happy Very Happy
Back to top
View user's profile Send private message
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Fri May 14, 2010 11:42 am    Post subject: Reply with quote  Mark this post and the followings unread

TekniK and adambee - many thanks for the kind words on my 1U Rack modules Very Happy cool

Here's some pix of my JH string filter with 40 sliders Shocked

I've gone for the vintage Radiogram look, still work in progress but 90% complete.

Allan

Posted Image, might have been reduced in size. Click Image to view fullscreen.


Posted Image, might have been reduced in size. Click Image to view fullscreen.
Back to top
View user's profile Send private message
jhaible



Joined: May 25, 2007
Posts: 2014
Location: Germany
Audio files: 24

PostPosted: Fri May 14, 2010 12:12 pm    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
TekniK and adambee - many thanks for the kind words on my 1U Rack modules Very Happy cool

Here's some pix of my JH string filter with 40 sliders Shocked

I've gone for the vintage Radiogram look, still work in progress but 90% complete.

Allan

Posted Image, might have been reduced in size. Click Image to view fullscreen.


Posted Image, might have been reduced in size. Click Image to view fullscreen.


Awesome. Simply awesome. I wish I had the time to build a version like that. Well, I don't even have the space, and should rather think of selling some of my prototypes of various projects rather than building more. But anyway: It's stunning to see instruments built from my PCBs that surpass what I had actually in mind when I designed them. Love it!

JH.

_________________
"I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Fri May 14, 2010 1:18 pm    Post subject: Reply with quote  Mark this post and the followings unread

Quote:
Awesome. Simply awesome. I wish I had the time to build a version like that. Well, I don't even have the space, and should rather think of selling some of my prototypes of various projects rather than building more. But anyway: It's stunning to see instruments built from my PCBs that surpass what I had actually in mind when I designed them. Love it!


Many thanks for the kind words Jurgen, I'm humbled. Embarassed

Your designs are truly outstanding and it is only this that allows us to build modules that go way beyond anything similar; keep up the good work!

Can't wait to get started on my Living Vocoder Wink

Allan
Back to top
View user's profile Send private message
emdot_ambient



Joined: Nov 22, 2009
Posts: 669
Location: Frederick, MD

PostPosted: Sun May 16, 2010 5:37 pm    Post subject: Reply with quote  Mark this post and the followings unread

Wow, very impressive. I love sliders...though I can't seem to really source ones I like. What sliders/knobs did you use for that thing? I assume they're PCB mounted?
Back to top
View user's profile Send private message Visit poster's website
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Mon May 17, 2010 4:35 am    Post subject: Reply with quote  Mark this post and the followings unread

emdot_ambient wrote:
Wow, very impressive. I love sliders...though I can't seem to really source ones I like. What sliders/knobs did you use for that thing? I assume they're PCB mounted?


60mm slide pots and matching knobs were from Rapid Electronics in the UK http://www.rapidonline.com/sku/Electronic-Components/Resistors-Potentiometer/Control-Potentiometers/Slide-potentiometers/65234/66-0140

They are 10K log rather than specified value (50K of 100K?), however I checked it out with JH and 10K Log work fine. The pots are not fitted to a pcb or matrix board, they are fitted inside a timber frame with a couple of removable retainer strips so that I can replace any sliders should they fail, they are all hand wired - lots of work! I designed this part first then designed the panel around the slider centres I ended up with. Certainly possible to fit them to a pcb but it would be expensive as a one off. Front panel was made by Schaeffer as a plain aluminium panel with cutouts, this had a glossy photo paper printed overlay which was glued on then sprayed with 3 coats of satin acrylic laquer for protection. I am lucky that I have access to a large format A0 size printer which prints to a roll of thick glossy photo paper Very Happy I have panel in Shaeffer/ front panel express .fpd format if you need it - obviously it will only work with the same pots I've used or narrower ones fitted to a pcb.
Back to top
View user's profile Send private message
emdot_ambient



Joined: Nov 22, 2009
Posts: 669
Location: Frederick, MD

PostPosted: Mon May 17, 2010 7:24 am    Post subject: Reply with quote  Mark this post and the followings unread

Thanks. I can't seem to find nice sliders here in the states. I'll have to check how much shipping will hurt.
Back to top
View user's profile Send private message Visit poster's website
adambee7



Joined: Apr 04, 2009
Posts: 420
Location: united kingdom

PostPosted: Mon May 17, 2010 11:11 am    Post subject: Reply with quote  Mark this post and the followings unread

Again more class. Its nice to get a good visual representation of settings. That must of taken a while to build. Nice work 2thick4uni. Very Happy Very Happy
Back to top
View user's profile Send private message
emdot_ambient



Joined: Nov 22, 2009
Posts: 669
Location: Frederick, MD

PostPosted: Tue May 18, 2010 11:56 am    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
The pots are not fitted to a pcb or matrix board, they are fitted inside a timber frame with a couple of removable retainer strips so that I can replace any sliders should they fail...

The more I think about this the more I wonder...do you have any pics of how you did this?
Back to top
View user's profile Send private message Visit poster's website
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Wed May 19, 2010 10:02 am    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
TekniK and adambee - many thanks for the kind words on my 1U Rack modules Very Happy cool

Here's some pix of my JH string filter with 40 sliders Shocked

I've gone for the vintage Radiogram look, still work in progress but 90% complete.

Allan



Shocked awesome
Back to top
View user's profile Send private message
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Wed May 19, 2010 11:42 am    Post subject: Reply with quote  Mark this post and the followings unread

emdot_ambient wrote:
2thick4uni wrote:
The pots are not fitted to a pcb or matrix board, they are fitted inside a timber frame with a couple of removable retainer strips so that I can replace any sliders should they fail...

The more I think about this the more I wonder...do you have any pics of how you did this?


Hi Emdot_ambient,

Sorry for slow reply, my camera and String filter weren't in the same location. Couple of shots of the pot retaining arrangement as requested, the two wooden strips that retain the slider pots are screwed to two pieces of wood underneath which are bonded to the aluminium front panel, hope this makes sense.

All cables are shielded, not sure if it's necessary but I just wanted to keep the noise floor as low as possible. The resistors you can see are just temporary, testing different mixing arrangements at the moment.



Posted Image, might have been reduced in size. Click Image to view fullscreen.

Posted Image, might have been reduced in size. Click Image to view fullscreen.
Back to top
View user's profile Send private message
emdot_ambient



Joined: Nov 22, 2009
Posts: 669
Location: Frederick, MD

PostPosted: Thu May 20, 2010 9:45 am    Post subject: Reply with quote  Mark this post and the followings unread

Awesome. Yes, that makes total sense. Thanks!
Back to top
View user's profile Send private message Visit poster's website
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Mon May 24, 2010 3:21 pm    Post subject: Reply with quote  Mark this post and the followings unread

Wired 1 Flanger.
Last edited by TekniK on Thu Aug 19, 2010 4:00 am; edited 1 time in total
Back to top
View user's profile Send private message
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Tue May 25, 2010 12:47 am    Post subject: Reply with quote  Mark this post and the followings unread

TekniK wrote:
Wired 1 Flanger.


Looks superb! Very classy job - any pix of your full system yet?

How do you make the front panels?
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Tue May 25, 2010 11:36 am    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
TekniK wrote:
Wired 1 Flanger.


Looks superb! Very classy job - any pix of your full system yet?

How do you make the front panels?


Thanks,I let them manufactured ,these are laser engraved (cheapest solution so far).
Back to top
View user's profile Send private message
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Tue May 25, 2010 2:12 pm    Post subject: Reply with quote  Mark this post and the followings unread

TekniK wrote:
2thick4uni wrote:
TekniK wrote:
Wired 1 Flanger.


Looks superb! Very classy job - any pix of your full system yet?

How do you make the front panels?


Thanks,I let them manufactured ,these are laser engraved (cheapest solution so far).


Wow, that sounds very interesting and useful - can you let me know where you get them made?
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Tue May 25, 2010 3:06 pm    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:

Wow, that sounds very interesting and useful - can you let me know where you get them made?


Its a local manufacture here specialized in aluminum only.
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Fri May 28, 2010 12:27 pm    Post subject: Reply with quote  Mark this post and the followings unread

Made finaly my JH Filter/Phaser VCF

this thing sound F**king AWESOME!

Thanks juergen for your great designs!

Last edited by TekniK on Thu Aug 19, 2010 4:01 am; edited 1 time in total
Back to top
View user's profile Send private message
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Sun May 30, 2010 2:52 am    Post subject: Reply with quote  Mark this post and the followings unread

Excellent work Teknik, up to your usual very high standards. I really like the look of the complete rack - are these based on 5U synthesisers.com format or are they 6U high?
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Sun May 30, 2010 3:18 am    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
Excellent work Teknik, up to your usual very high standards. I really like the look of the complete rack - are these based on 5U synthesisers.com format or are they 6U high?


Hi,thank u for your kind compliments,its 6u ,5u is impossible to find,in fact 5u subracks its nowhere WW available.

The gap at the bottom will be filled with a front that i will let manufacture ,the powerswitch will fit on it etc.
Back to top
View user's profile Send private message
2thick4uni



Joined: Feb 20, 2009
Posts: 113
Location: UK

PostPosted: Sun May 30, 2010 9:54 am    Post subject: Reply with quote  Mark this post and the followings unread

TekniK wrote:
2thick4uni wrote:
Excellent work Teknik, up to your usual very high standards. I really like the look of the complete rack - are these based on 5U synthesisers.com format or are they 6U high?


Hi,thank u for your kind compliments,its 6u ,5u is impossible to find,in fact 5u subracks its nowhere WW available.

The gap at the bottom will be filled with a front that i will let manufacture ,the powerswitch will fit on it etc.


That makes sense, I really like the idea of having power switch on the front of the rack without having to loose a module space to house it and psu.

Looks like you've invented a new modular format! Very Happy
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Sun May 30, 2010 10:46 am    Post subject: Reply with quote  Mark this post and the followings unread

2thick4uni wrote:
Looks like you've invented a new modular format! Very Happy


No,inspiration came from the Roland System 100M
Back to top
View user's profile Send private message
strategy



Joined: Jan 03, 2009
Posts: 68
Location: portland, oregon

PostPosted: Sun Jun 06, 2010 8:36 am    Post subject: Reply with quote  Mark this post and the followings unread

Here's my first JH build, been chipping away at it for ages. Huge thanks are owed to VTL5C3 for helping me trouble shoot and get it finalized.

Tau as a floor friendly module, with fairly maxed out (almost deluxe) controls. Stomp switch for rocking or, controls work nicely when placed atop my Farfisa organ and it sounds mighty on that keyboard as well. Stereo outputs and CV inputs make it work nicely at my mixing desk as well.

Thanks Juergen looking forward to doing more!

- Strategy

Posted Image, might have been reduced in size. Click Image to view fullscreen.
Posted Image, might have been reduced in size. Click Image to view fullscreen.

_________________
--------
community-library.net/strategyhome.htm
Back to top
View user's profile Send private message Visit poster's website
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8930
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sun Jun 06, 2010 8:46 am    Post subject: Reply with quote  Mark this post and the followings unread

Hey Paul! That's an interesting and sparse design. It it working well?

Tom

_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic Moderators: Scott Stites
Page 6 of 9 [207 Posts]
View unread posts
View new posts in the last week
Goto page: Previous 1, 2, 3, 4, 5, 6, 7, 8, 9 Next
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » Jürgen Haible designs
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
emSynth

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use