Is my A6 broken ? Strange things happened with long release

[AdamZ]

Hello - this is my first post. Sorry for my really bad english

I own A6 from +- 8 months. I bought it new but compared to my other analog and digital synths there is some strange things happened when i use long RELEASE.

When i use smaller amount of release and i play arpeggio like notes some of them are cuted at the end. It soundsmore like few mono synths but other voices sounds OK. It's little bit like a cycle and depending of the release amount. With a bit shorter release it cut's 2-3 notes from 16 but when release is longer it sounds really strange and after a while all of the notes are cuted at the end, than again it sounds OK When i play chords it sounds better, maybe even good or i didn't hear it that much. Is it normal for Andromeda ? Is the only synth i own which sound like that.

I own many analog and digital synths. from voyager , prophet etc. to JD800 or D50.

here is link to the mp3 to show you exactly what i mean :

http://www.speedyshare.com/files/23876814/andromeda.mp3

I use only one OSC. Second part is with longer release setting. No sustain pedal , no knobs ... just playing on the keyboard.
Is it only my unit or is normal for Andy ?

When I play with sustain pedal it sounds OK.

My second problem is D1 key. There is a problem with velocity. It seems like velocity jump from minimum directly to the maximum value. So when i play very softly is OK and than when i play just a bit harder it goes directly to the maximum. The other keys are OK. Any ideas ?



One more time sorry for my bad English.

[Perfect Day]

Hi , You could try setting voice steal to 'ON' in the global>keyboard parameters menu . Also look at the dynamics page of your envelopes and set the reset value to normal . Go to the trig envelope page and set enable to off and mode to Norm 1 . Sounds like your running out of polyphony or somethings retriggering your envelope(s) maybe . As far as the volocity issue , Maybe try initialising all Global parameters (power up holding soft button 4) If all that fails try a hard reset .(power up holding soft button 3) This will lose any programs you havent backed up though .
Hope that helps

[AdamZ]