FS: Oakley Populated VCO/VCF/LFO boards and more (UK)

[digitana]

I am selling some populated Oakley Modular system boards and a few unbuilt pcb's. The populated board are taken from a non-standard format modular system I built about 10 years ago. I have kept enough modules from that system for a small Oakley based Modular for myself and these are left over. They all certainly worked before they were removed from the system several years ago but will likely need re-calibrating.

I havent included the pots as these were the green sealed plastic Omeg type which were getting a bit sticky (well known problem with these pots which is why Oakley stopped using/recommending them I think) so you are better off using new pots.

I have included for free a bag of 60x 1/4" Switchcraft 'clone' jack sockets (with washers/nuts). These are stereo jacks but can of course be used as mono jacks.

what's included:-

populated boards
-------------------

4 x VCO mk1 iss. 1 (2000)
(no tempcos fitted)

2 x Superladder VCF iss1. (1999)
one is built as standard the other built with the optional TB303-like version

2 x Little LFO

1 x Envelope Follower and Gate Extractor iss. 1 (1999)

All IC's are socketed.


Bare PCB's
-------------

2 x Mixer iss1. (2000)

1x Equinoxe Phaser iss. 2

1x Power Distribution Board iss1 (2001)

I will include hard copies of the Oakley build notes.

Asking £260 for the lot which included UK postage.

Outside the UK ask me for a shipping quote.

Thanks.

---

oakley_set1.jpg
Description:
Filesize:	695.27 KB
Viewed:	205 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

---

---

oakley_set2.jpg
Description:
Filesize:	714.69 KB
Viewed:	183 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

---

---

oakley_set4.jpg
Description:
Filesize:	710.14 KB
Viewed:	189 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

---

[digitana]

sold