electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software » The layout factory
lease Help. Broadwave Arp Odyssey Diy part question
Post new topic   Reply to topic
Page 1 of 1 [5 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
citric acid



Joined: Jun 11, 2011
Posts: 45
Location: germany

PostPosted: Thu Aug 18, 2011 9:01 am    Post subject: lease Help. Broadwave Arp Odyssey Diy part question Reply with quote  Mark this post and the followings unread

Hi,

hope someone can help me.
i have no 2N5910 and they are hard to get here in germany.
I saw in the Bom that i also can use an 2n3906 . but i can´t find an information in the net how to solder them in . I mean in witch direction. can someone help me please!

Thanks

_________________
http://soundcloud.com/citric-acid-303
Back to top
View user's profile Send private message Visit poster's website
Level5



Joined: Feb 16, 2007
Posts: 29
Location: Germany

PostPosted: Fri Aug 19, 2011 1:23 am    Post subject: Reply with quote  Mark this post and the followings unread

When you look from Top at the flat side, the Pin's from the 2N3906 are E-B-C (from left to right)
Back to top
View user's profile Send private message
citric acid



Joined: Jun 11, 2011
Posts: 45
Location: germany

PostPosted: Fri Aug 19, 2011 9:14 am    Post subject: Reply with quote  Mark this post and the followings unread

Level5 wrote:
When you look from Top at the flat side, the Pin's from the 2N3906 are E-B-C (from left to right)


thanks, that helps 50% . do you know in witch direction i have to solder them on the pcb? flat side down or up. the 3 pins on the pcb are not clearly named. i mean i know e-b-c but i can´t find witch solder point is e-b-c ... sorry

_________________
http://soundcloud.com/citric-acid-303
Back to top
View user's profile Send private message Visit poster's website
Level5



Joined: Feb 16, 2007
Posts: 29
Location: Germany

PostPosted: Sat Aug 20, 2011 1:11 am    Post subject: Reply with quote  Mark this post and the followings unread

I compared the Layout with the Arp-schematics:
the 2N5910 has C-B-E, flat side down, then the 2N3906 must have the flat side up.
Back to top
View user's profile Send private message
citric acid



Joined: Jun 11, 2011
Posts: 45
Location: germany

PostPosted: Sat Aug 20, 2011 9:57 am    Post subject: Reply with quote  Mark this post and the followings unread

Level5 wrote:
I compared the Layout with the Arp-schematics:
the 2N5910 has C-B-E, flat side down, then the 2N3906 must have the flat side up.


thanks thanks.... you made my day and saved my module...
Rolling Eyes

_________________
http://soundcloud.com/citric-acid-303
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic
Page 1 of 1 [5 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » The layout factory
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use