PCBs for the fonitronik Sequential Switch (4th run)

[fonik]

EDIT Feb 6th:
i will take advance orders until Feb 13th
ETA of the PCBs would be early march. i won't take any money until i hold the PCBs in my hands. i will contact you concerning payment details when time has come. paypal preferred.
----------

again some of you indicated interest in this project, so i would do a 4th run if there would be interest in more than at least 30 PCBs.

BTW i think this module will be a good companion for the symplSEQ.

simply post in this thread, contact me via email or even PM, and tell me how many PCBs you will take. BTW i won't take any money until i hold the boards in my hands...

i personally think it is a very useful module. it provides one output/input that can be routed sequentially to four inputs/outputs. the step and reset of the switch can be controlled manually and/or by a clock. the number of steps is selectable (2, 3 or 4 steps), which is very nice if you want to switch live between different sources/destinations. all signals between -15V and +15V can be switched, due to the DG412 (or MAX313) IC used.

here you will find the latest documentation:
Building Docs

PRICING:
each PCB 10.-USD/7.-EUR

+ packaging & postage
deutschland: 1 PCB 1.-EUR, 2+ PCBs 1.50 EUR
europe: 2 PCBs 2.-EUR, 3+ PCBs 4.-EUR
outside europe: 2 PCBs 4.-USD, 3+ PCBs 6.-USD

this is how it could look like:
SeqSwitch fonitronik.de

[Mongo1]

I'll take 3 - they look pretty useful...

Thanks
Gary

[inlifeindeath]

2 for me please

[aladan]

2 please
Any suggestions where I might pick up a few DG412 or MAX313 cheaper than Futurelec (MAX313 @ $5.90 each?)

[ejr27233]

I'll take 2 please

[mark_olson]

Matthias: I haven't actually added it up, but it's looking like between here and Muff's you may hit your minimum!

Count me in for 2.

Thanks for considering another run; I was disappointed that the last one came during a self-imposed moratorium on adding to my backlog!

Mark

[fonik]

indeed. it wil happen. i will have to list al pre-orders up, and then i will set a cutoff date. from then on the delivery date is fixed...

[citric acid]

hi,

as i wrote in an old treat , i wan´t 2 please !

[keithwin]

Blimey, only just seen this again, I would like three if not too late?

[fonik]

have some spares, so no problem at this point.

[keithwin]

That's a definite from me, thankyou

[textual]

[fonik]

yes.

[janvanvolt]

For the sake of my sympleseq: i'd like to take one PCB of the seqswitch .-)

[mark_olson]

[fonik]

it happens right now. the PCBs should arrive soon, and i ordered some spares as always. so still time to jump on the bus.

[mark_olson]

[fonik]

now all PM's/emails are sent.

if you have the feeling you missed something or i missed to contact you, just let me know... there are spares avilable.

[keithwin]

Boards waiting for me at work this morning, very smart, many thanks Matthias.

[fonik]

you have a soldering iron at work?

[keithwin]

Wish I had, would solve all sorts of problems :0)
The soldering I do at work needs significantly higher temperature, platinum for example