Recommend me a CV/ Gate sequencer to build?

OW · Joined: Nov 03, 2009 Posts: 118 Location: London

Hi,

I'm looking to build a CV/ Gate sequencer with a clock in, much like the one inside the x0xb0x. I want it to be able to store sequences, and have a minimum of 16 steps per sequence. I don't really care for midi as my setup is all CV/ gate.

(I hope that's not too much to ask!)

Can anyone recommend me something?

Thanks!

Mongo1 · Joined: Aug 11, 2011 Posts: 392 Location: Raleigh NC

Storing sequences is the sticking point.
Otherwise the MFOS 16 or Klee would be what you need. If you want to store patches, you'll have to go with something microprocessor based.

One alternative might be to get the software version of the Klee, and run it into a midi to cv interface.

Gary

Dougster · Joined: Sep 20, 2005 Posts: 272 Location: Tucson, AZ, USA

You might consider putting something together with MIDIbox parts. Check out http://www.ucapps.de and in particular:

http://ucapps.de/midibox_seq.html
http://ucapps.de/midibox_cv.html

Regards,
Doug

Mongo1 · Joined: Aug 11, 2011 Posts: 392 Location: Raleigh NC

Actually, there's a fellow on muff selling exactly what you want...

http://www.muffwiggler.com/forum/topic-57312.html

Gary

Tim Servo

How about a Blacet Hex Zone? Kits are available, and it sounds like it has the features you're after. Of course, you'll have to get a Frac or other suitable box and a power supply, but you'd need that with any sequencer.

Tim (fracking around) Servo

OW · Joined: Nov 03, 2009 Posts: 118 Location: London

Thanks for the replies!

There's a 404 error on the muff link. What's the sequencer called, so I can search for it?