Binary Game Sequencer

fonik · Last edited by fonik on Thu Mar 14, 2013 11:10 pm; edited 2 times in total

hi all,

this is what i finished last night. i am still missing the front panel, so the LEDs are not mounted yet...

it is a new kind of an unipolar sequencer, based on a binary counter/divider (4024), instead of a decade counter/divider (4017).

the concept: each divisions output is routed to an attenuator. the divisions attenuated voltages are then summed.

the realization: each divisions output controlls a CMOS switch. these switches have sockets on it's inputs, normalled to +V. so for each division you could use an external voltage also. this voltage is then going to a simple passive attenuator, and is then routed to one or none of the two CV mixers (on/off/on toggle switch).
additionally each division is converted to a trigger and available at a divider output socket.
a step and reset control makes it complete.

taking a look at the pictures below you see for each division from top to bottom: external voltage input, attenuator, routing switch, LED indicator, division trigger output. bottom row is for I/O (clock, reset, CV outputs A & B).

the nice thing is that you create two CV sequences that are related to each other.

schematics, demo and better pictures will follow as soon as i got the front panel... i just had to share.

Posted Image, might have been reduced in size. Click Image to view fullscreen.

[edit: photos replaced]
Posted Image, might have been reduced in size. Click Image to view fullscreen.

The Bad Producer · Joined: Mar 08, 2009 Posts: 235 Location: The Manhole

Hey Matthias, that's really cool - so if I get this right, you can send each steps voltage to be summed at either A or B or off at the flick of a switch?

fonik · Posted: Thu Mar 14, 2013 3:56 am Post subject:

The Bad Producer · Joined: Mar 08, 2009 Posts: 235 Location: The Manhole

I was obviously somewhere else this morning! I get it better now, helped by the panels pic on Muff's, i think I was confused with the binary counting, I went somewhere else, actually seems better now I properly get it Laughing

fonik · Posted: Fri Mar 15, 2013 3:18 pm Post subject:

so here is a 1st sample i did. no big deal, just the Binary game Sequencer, the doepfer quantizer, two thomas henry VCOs (555 and 4046) and my LPG. 1min of patching and it sounds like this:

elmegil · Posted: Fri Mar 15, 2013 6:41 pm Post subject:

Nice!

tony void · Joined: Apr 26, 2011 Posts: 37 Location: Parma, Ohio

Listened to this earlier today on my sound cloud subscriptions. Very pleasing to the ears. Had to check this sub forum to what it was all about. Cool idea!

Uncle Krunkus · Posted: Sun Mar 17, 2013 3:12 am Post subject:

Very nice Mathias! Cool

fonik · Posted: Thu Mar 21, 2013 8:09 am Post subject:

front panel arrived, LEDs mounted, all is working as expected :guinness:

Binary Game Sequencer by fonitronik, on Flickr

Uncle Krunkus · Posted: Fri Mar 22, 2013 1:05 pm Post subject:

Blue Hell · Posted: Fri Mar 22, 2013 1:57 pm Post subject:

fonik · Posted: Sun Mar 24, 2013 4:03 am Post subject:

fonik · Posted: Sun Mar 24, 2013 4:04 am Post subject:

last night i made a quick video. no time, no light, bad camera, bad vid quality... anyways, it shows the basic functionality and concept, i think.

quick and dirty demo of my new binary sequencer from fonitronik on Vimeo.

(each CV channel to a X4046 VCO. 1st division trigger out to LPG for 1st VCO, 2nd division out to 12db SVF - in the beginning only channel A, later on channel B fades in. switch set to left routes the CV to channel A, to the right channel B, center position OFF)

fonik · Posted: Tue Mar 26, 2013 4:18 pm Post subject:

and here a few more demos (i am in love with this thing)

Binary Game Sequencer: Another Short Demo from fonitronik on Vimeo.

One more simple Demo of the Binary Game Sequencer from fonitronik on Vimeo.

(using external voltage)

Binary Game Sequencer in Audio Mode from fonitronik on Vimeo.

(in audio mode)

emdot_ambient · Joined: Nov 22, 2009 Posts: 669 Location: Frederick, MD

Wow...these are crazy good!

LektroiD · Posted: Wed Apr 17, 2013 8:01 am Post subject:

I hope these will be available as kits in the near future...

Skrog Productions · Posted: Mon Apr 29, 2013 10:42 am Post subject:

Hi Matthias

i'd be interested in pcb's if you are doing a run.

Dave.

fonik · Posted: Mon Apr 29, 2013 12:24 pm Post subject:

i will do a run, if there is enough interest.

i already did a re-design of the circuit board to match the eurorack front panel PCB. they could be mounted piggyback to avoid any manual wiring (however, i know that there are not that much eurorack lovers here, no?).

anyways, i will have to finish two other prototypes first (TH ADSR, and the new fonitronik triple vactrol resonator).

mcop · Joined: Apr 27, 2012 Posts: 17 Location: Brighton UK

I'd be interested in a set of boards if you do a run. Particularly interested in it's ability to take external inputs, makes for some very interesting possibilities.