Symmetrical Digital Dividers

PHOBoS · Last edited by PHOBoS on Thu Aug 17, 2017 7:50 am; edited 1 time in total

Something I came across yesterday. 3 circuits to divide a squarewave by 3, 5 or 7 but with a 50/50 output. I dont'know if it's been posted before
but seems useful for lunetta's Wink

anyway you can find it here. I allready had a CD4013 wired up on breadboard for a /4 divider, so all that was needed
was to add the XOR. The oscillator I used is a CD4046 VCO which allready has a build in XOR, so that was easy to hook up and it works like a charm. Very Happy

If you add a switch in the "feedback loop" and a pulldown resistor to the XOR's input you can choose between /3 or /4. (with some more switches
/1.5 and /2)

There's also a Four Phase Clock Generator on the same site which could be a nice addition to a lunetta Cool

edit: there is an older thread with some more info here.

commathe · Posted: Mon Sep 09, 2013 9:12 pm Post subject:

Fantastic! This is precisely the kind of thing I've been looking for.

Cynosure · Posted: Sun Oct 13, 2013 5:10 pm Post subject:

Thanks for posting this link in chat. I guess I missed it when you first posted it. Very cool Smile

elektrouwe · Joined: May 27, 2012 Posts: 109 Location: Germany

yes, this is a very old trick. But a nice one and a good idea to repost it every decade for the newbies Smile

. It can also be used with a 4017 or any divider to get symmetrical outputs : use a frequency doubling circuit - in this case an XOR, but simpler gates with RC spike generation on the rising and falling clock edge will work too - feed the doubled clock to any divider and symmetrize the output by /2 e.g. with a T - flip flop.
don't overlook: input clock must be symmetrical.