electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software
2013 Build Pictures
Post new topic   Reply to topic Moderators: jksuperstar, Scott Stites, Uncle Krunkus
Page 6 of 8 [178 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Goto page: Previous 1, 2, 3, 4, 5, 6, 7, 8 Next
Author Message
AndyR1960



Joined: Feb 16, 2007
Posts: 281
Location: Manchester UK
Audio files: 5

PostPosted: Sun Aug 11, 2013 10:23 am    Post subject: Reply with quote  Mark this post and the followings unread

It's done! Sounds like the Mutt's Nuts Very Happy

No more DIY for a while... My head needs to recover Wink

I'm not too hot on video, but I'll get something together on Youtube.


IMG_2727.JPG
 Description:
 Filesize:  4.34 MB
 Viewed:  122 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_2727.JPG


Back to top
View user's profile Send private message
the19thbear



Joined: Apr 19, 2007
Posts: 112
Location: denmark

PostPosted: Sun Aug 11, 2013 10:30 am    Post subject: Reply with quote  Mark this post and the followings unread

Shocked Shocked Shocked Shocked Shocked Shocked Shocked Shocked Shocked Shocked
Back to top
View user's profile Send private message
isak



Joined: Dec 13, 2009
Posts: 698
Location: Israel
Audio files: 18

PostPosted: Sun Aug 11, 2013 10:34 am    Post subject: Reply with quote  Mark this post and the followings unread

AndyR1960 wrote:
It's done! Sounds like the Mutt's Nuts Very Happy

No more DIY for a while... My head needs to recover Wink

I'm not too hot on video, but I'll get something together on Youtube.


congrats on this build, no less then AMAZING!!!!!!!!

waiting for the Odyssey Cool

_________________
http://www.myspace.com/mgmtrance
Back to top
View user's profile Send private message
Blue Hell
Site Admin


Joined: Apr 03, 2004
Posts: 20536
Location: The Netherlands, Enschede
Audio files: 147
G2 patch files: 318

PostPosted: Sun Aug 11, 2013 10:49 am    Post subject: Reply with quote  Mark this post and the followings unread

W Shocked W

That's a great looking BroadWAVE synth.

Hope you'll have lots of joy playing it!

_________________
Jan
Back to top
View user's profile Send private message Visit poster's website
sonicwarrior



Joined: Dec 22, 2005
Posts: 226
Location: Cologne, Germany

PostPosted: Sun Aug 11, 2013 11:26 am    Post subject: Reply with quote  Mark this post and the followings unread

Finished the Doepfer bus boards today:

No. 4:
Posted Image, might have been reduced in size. Click Image to view fullscreen.

No. 5:
Posted Image, might have been reduced in size. Click Image to view fullscreen.

No. 6:
Posted Image, might have been reduced in size. Click Image to view fullscreen.

For my Livewire AFG I had to make new power cables because they had the wrong key:
Posted Image, might have been reduced in size. Click Image to view fullscreen.
Back to top
View user's profile Send private message
sndbyte



Joined: Jun 26, 2009
Posts: 115
Location: sf

PostPosted: Tue Sep 03, 2013 6:34 pm    Post subject: Reply with quote  Mark this post and the followings unread

MFOS Noise Toaster


mfos noise toaster 2.JPG
 Description:
 Filesize:  612 KB
 Viewed:  58 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

mfos noise toaster 2.JPG



mfos noise toaster.JPG
 Description:
 Filesize:  654.19 KB
 Viewed:  57 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

mfos noise toaster.JPG


Back to top
View user's profile Send private message
isak



Joined: Dec 13, 2009
Posts: 698
Location: Israel
Audio files: 18

PostPosted: Sat Sep 07, 2013 4:25 am    Post subject: MOE Analog Bass Synth Reply with quote  Mark this post and the followings unread

Hi guys.

i build a bass synth by request of some artist.
non of the modules inside are mine.
inside are...
AndyR1960 - 2 X Ody VCO
MFOS - LFO
ACX - lite midi to CV
Yusynth - Dual glide, 4072 VCF, ENV, VCA, Noise and Mixer.
i found over the net a scheme of the SH101 SubOsc and i design the PCB for that my self, its working Great!

some pics and tube clip (the tube clip is in Hebrew but you'll get the point).
http://www.youtube.com/watch?v=AaYcMA1p0Xw

cheers,
Isak E.


IMG_2754.jpg
 Description:
 Filesize:  202.62 KB
 Viewed:  92 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_2754.jpg



IMG_2755.jpg
 Description:
 Filesize:  115.35 KB
 Viewed:  59 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_2755.jpg



IMG_2756.jpg
 Description:
 Filesize:  125.12 KB
 Viewed:  59 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_2756.jpg



_________________
http://www.myspace.com/mgmtrance
Back to top
View user's profile Send private message
kanji



Joined: Aug 17, 2012
Posts: 5
Location: Finland

PostPosted: Wed Sep 11, 2013 3:13 am    Post subject: TR-808 Clone
Subject description: Midibox controlled TR-808 Clone build on veroboard
Reply with quote  Mark this post and the followings unread

Here is my lastest project. TR-808 clone build on veroboard with midibox MB808 sequencer.

Last year I build couple of individual 808-voice boards, starting with kick, then snare, and low tom drum.

This summer I thought why not build all the 808 sounds and wrap those in one case. Now I've build mid and hi toms, clave/rim, cowbell, hihats, maracas and clap. I'm still missing cymbal, but other than that, the clone works.

After finishing all the sound circuits I needed a trusty sequencer, so that I have a standalone unit. After gathering some courage, I ordered midibox core, din and dout kits from SmashTV and started building the sequencer. Sequencers main UI pbc with all the buttons and leds is also build on veroboard. I have to say, connecting all the buttons and leds to Midibox DIN and DOUTS was pain, but it was all worth it because MB808 sequencer firmware is simple amazing.

Here are couple photos from the build and video so you can here sounds and see the sequencer in action.

It has ugly insides but beautiful soul Wink


http://www.youtube.com/watch?v=xw08MQJb7LA


MB808_1.jpg
 Description:
 Filesize:  711.75 KB
 Viewed:  71 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

MB808_1.jpg



MB808_2.jpg
 Description:
 Filesize:  558.34 KB
 Viewed:  80 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

MB808_2.jpg


Back to top
View user's profile Send private message
The Bad Producer



Joined: Mar 08, 2009
Posts: 255
Location: The Manhole

PostPosted: Thu Sep 12, 2013 7:47 am    Post subject: Reply with quote  Mark this post and the followings unread

nice 808! wish I had one!
_________________
http://loudestwarning.tumblr.com/
http://soundcloud.com/thebadproducer
Back to top
View user's profile Send private message Visit poster's website
sonicwarrior



Joined: Dec 22, 2005
Posts: 226
Location: Cologne, Germany

PostPosted: Mon Sep 16, 2013 9:30 am    Post subject: Reply with quote  Mark this post and the followings unread

My Tellun Neural Agonizer is finished. Kudos to elmegil for helping me during the debug phase which resulted in this additional 10 pF on the back of the main PCB:

Posted Image, might have been reduced in size. Click Image to view fullscreen.

Here is the module with the two reverb tanks:

Posted Image, might have been reduced in size. Click Image to view fullscreen.

And the back, not as nice cabling as others but apart from 2 wires which are a bit short I'm quite happy how it turned out:

Posted Image, might have been reduced in size. Click Image to view fullscreen.
Back to top
View user's profile Send private message
delayed



Joined: Jun 24, 2008
Posts: 129
Location: TN

PostPosted: Fri Sep 20, 2013 2:48 am    Post subject: Reply with quote  Mark this post and the followings unread

what tanks did you use? like them? where did you get them from?
Back to top
View user's profile Send private message
sonicwarrior



Joined: Dec 22, 2005
Posts: 226
Location: Cologne, Germany

PostPosted: Fri Sep 20, 2013 10:06 am    Post subject: Reply with quote  Mark this post and the followings unread

Accutronics 9FB2D1B (original USA) which I got from Tube Amp Doctor in Germany several years ago when they were cheaper.

They have a middle decay but I still would prefer a smaller decay.
Back to top
View user's profile Send private message
RF



Joined: Mar 23, 2007
Posts: 1493
Location: Northern Minnesota, USA
Audio files: 28

PostPosted: Tue Sep 24, 2013 5:52 pm    Post subject: Reply with quote  Mark this post and the followings unread

Really first rate builds - all of you. I hang my head in shame.
Awesome builds!

_________________
www.sdiy.org/rfeng

"I want to make these sounds that go wooo-wooo-ah-woo-woo.”
(Herb Deutsch to Bob Moog ~1963)
Back to top
View user's profile Send private message
sonicwarrior



Joined: Dec 22, 2005
Posts: 226
Location: Cologne, Germany

PostPosted: Wed Oct 02, 2013 10:33 am    Post subject: Reply with quote  Mark this post and the followings unread

Finished my Sonic Potions LXR drum machine:

Posted Image, might have been reduced in size. Click Image to view fullscreen.

Uploaded with ImageShack.us
Back to top
View user's profile Send private message
LFLab



Joined: Dec 17, 2009
Posts: 191
Location: Rosmalen, Netherlands

PostPosted: Thu Oct 03, 2013 1:38 am    Post subject: Reply with quote  Mark this post and the followings unread

Hadn't heard of that kit, but it looks great!
Back to top
View user's profile Send private message
beep



Joined: May 05, 2013
Posts: 84
Location: Germany

PostPosted: Tue Oct 08, 2013 4:46 am    Post subject: Reply with quote  Mark this post and the followings unread

my first proper "built" thing, which is in a stable enclosure.

not neccesarily beautiful but analogue.


_________________
Is the future obsolete?
Back to top
View user's profile Send private message
zthee



Joined: Feb 20, 2008
Posts: 413
Location: Stockholm

PostPosted: Wed Oct 23, 2013 1:29 am    Post subject: Reply with quote  Mark this post and the followings unread

Posted Image, might have been reduced in size. Click Image to view fullscreen.

It's raining 2600 this year!

_________________
http://www.thehumancomparator.net/
Back to top
View user's profile Send private message
elmegil



Joined: Mar 20, 2012
Posts: 1475
Location: Chicago
Audio files: 14

PostPosted: Wed Oct 23, 2013 5:19 am    Post subject: Reply with quote  Mark this post and the followings unread

zthee wrote:
Posted Image, might have been reduced in size. Click Image to view fullscreen.

It's raining 2600 this year!


Hallelujah!

(I still swear that looks like a render Very Happy )
Back to top
View user's profile Send private message
sduck



Joined: Dec 16, 2007
Posts: 442
Location: Nashville
Audio files: 5

PostPosted: Sun Nov 03, 2013 7:03 pm    Post subject: Reply with quote  Mark this post and the followings unread

After the TTSH got postponed, I decided to start this thing. It's been a while - I took the summer off while job and financial insecurity took its toll.

This is either the J3RK Dual Mirror Core VCO or the Stroh Modular Dual Complex VCO. I'm not really sure which. Originally the thread was labeled as per the former, but as things progressed the name morphed to the latter. Either way, it's a really cool collection of vcos and utility modules, with which you can build the complex vco of your choice!

I tried out Front Panel Express's new standoff utility thing, and it worked well, mostly - I had one break off soon after transporting it from my heated studio area to my unheated garage where the soldering happens. No problem though - a little JB Weld and we're back in business.

J3RK Dual Complex VCO front

J3RK Dual Complex VCO profile

J3RK Dual Complex VCO back 1

J3RK Dual Complex VCO back 2
Back to top
View user's profile Send private message
feggster



Joined: Sep 12, 2011
Posts: 52
Location: uk

PostPosted: Tue Nov 05, 2013 1:36 pm    Post subject: Reply with quote  Mark this post and the followings unread

sduck...that looks fantastic, I bet its fun to play.
Back to top
View user's profile Send private message
Skrog Productions



Joined: Jan 07, 2009
Posts: 752
Location: Scottish Borders
Audio files: 87

PostPosted: Tue Nov 05, 2013 1:46 pm    Post subject: Reply with quote  Mark this post and the followings unread

Fantastic builds guys , they are looking really good.

Sduck, that looks superb , a very interesting module, nice.

Dave.

_________________
www.myspace.com/skrogproductions
Back to top
View user's profile Send private message
flab



Joined: Feb 13, 2012
Posts: 60
Location: Glasgow

PostPosted: Thu Nov 07, 2013 12:52 pm    Post subject: Reply with quote  Mark this post and the followings unread

some panels using hardboard Multiplier/TH555VCO/TimbreRomanf


IMG_2594[1].JPG
 Description:
 Filesize:  3.15 MB
 Viewed:  48 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_2594[1].JPG


Back to top
View user's profile Send private message
mcop



Joined: Apr 27, 2012
Posts: 32
Location: Brighton UK

PostPosted: Thu Nov 07, 2013 11:25 pm    Post subject: Reply with quote  Mark this post and the followings unread

Nice hardboard panels. Is that just ink or have you burnt the design into the hardboard?
Back to top
View user's profile Send private message Visit poster's website
flab



Joined: Feb 13, 2012
Posts: 60
Location: Glasgow

PostPosted: Fri Nov 08, 2013 7:27 am    Post subject: Reply with quote  Mark this post and the followings unread

hi there,
the whole design is made by laser - i used autocad for the layout and the hatches , the font is mine - engraved as well to the hardboard by a laser
Back to top
View user's profile Send private message
RingMad



Joined: Jan 15, 2011
Posts: 220
Location: Montreal, Canada
Audio files: 2

PostPosted: Sat Nov 09, 2013 6:28 am    Post subject: Reply with quote  Mark this post and the followings unread

flab wrote:
some panels using hardboard Multiplier/TH555VCO/TimbreRomanf

Really nice!

James.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic Moderators: jksuperstar, Scott Stites, Uncle Krunkus
Page 6 of 8 [178 Posts]
View unread posts
View new posts in the last week
Goto page: Previous 1, 2, 3, 4, 5, 6, 7, 8 Next
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use