More gain for a stompbox adapter?

Starspawn · Joined: Jun 14, 2013 Posts: 85 Location: Oslo

As title, using it to boost a buchla diy ring mod, but cant reach the level of the rest of my box, does seem to work, just low volume so thought someoen would know what resistors and such to change to lets say, double the gain.

AlanP · Posted: Sun Sep 14, 2014 6:01 pm Post subject:

http://www.cgs.synth.net/modules/cgs60_sba.html

Read the text again. It says to change the 470R resistor to alter the gain -- increase to drop the gain down, presumably decrease to boost the gain.

Starspawn · Joined: Jun 14, 2013 Posts: 85 Location: Oslo

Well, yes, presumably, but that doesnt tell me which value equals what gain, and it might not be that simple.

AlanP · Posted: Mon Sep 15, 2014 2:05 am Post subject:

Working on a board using this circuit, I just said "screw it" and subbed in a 1k pot (ie from zero to 1k range.) Also got a Bissell envelope follower... hopefully it works.

Starspawn · Joined: Jun 14, 2013 Posts: 85 Location: Oslo

Nice, let me/us know Smile