Voltage Meter Module (incl. cable tester)

fonik

this is what i did as a fun project last week: a voltage meter module with cable tester. the range is selectable from 0V to 10V or -5V to +5V. the module provides two LEDs indicating the input signal exceeding the modules working range.
to use the spare front panel space i added a cable tester. for this tester the sockets have to be isolated from the front panel (COM).
[for 12V operation R9 and R10 have to be adjusted. this voltage divider sets the reference voltage of 10V for the comparator.]

[edit: pictures embedded]

TekniK · Joined: Aug 10, 2008 Posts: 1062

macumbista · Posted: Tue Aug 03, 2010 5:40 am Post subject:

Very cool! What's that crazy thing at the right side of the power rails? 057-010-1...what company is that a part number for? Headers? Some kind of switch?

fonik · Posted: Tue Aug 03, 2010 5:44 am Post subject:

haha, no! it is nothing but the small doepfer style 2x5 pin buss connector (ribbon cable).

macumbista · Posted: Tue Aug 03, 2010 5:51 am Post subject:

Thought is was something like that...

fonik · Posted: Tue Aug 03, 2010 2:14 pm Post subject:

added some nicer pictures:

Tim Servo · Posted: Tue Aug 03, 2010 3:09 pm Post subject:

Beautiful work!
Smile

Tim (man of few words, today at least) Servo

fonik · Posted: Thu Sep 09, 2010 7:04 am Post subject:

i think this thread should now be moved into the fonik's place. janitors?

slo · Posted: Thu Sep 29, 2011 7:31 am Post subject:

A couple of questions on the meter itself. Is it a 0-10v range meter, one of your pics shows a 0-30v range meter, also the extra wires going to the meter, is that for illumination?
Thanks in advance

fonik · Posted: Thu Sep 29, 2011 7:41 am Post subject: