electro-music.com -> Alesis Andromeda https://electro-music.com/forum/ Looking for GOOD SYNTH Bass, the challlenge for Andromeda https://electro-music.com/forum/viewtopic.php?p=454137#454137 Interesting subject. Listen, all who defend the bass of the A6, can you do this bass with your andy?

http://www.detsnurrariminskalle.com/

(This is not my band, it´s a band from Sweden. They seem to have no synth bass problem anyway.)

The l ...
CoolColJ Tue, 11 Jul 2023 09:37:03 -0700
Sustain pedal with andrromeda https://electro-music.com/forum/viewtopic.php?p=454076#454076 how did you set the pedal input as source in the patch ...?

sustain pedal automatically sustains the notes

Under the Pedal tab in the Global settings, you can set the pedal to continuous or switch, and reverse the polarity

Under the mod lis ...
CoolColJ Thu, 29 Jun 2023 07:10:25 -0700
Sketchy pots and shaking parameters? BUY A DUST COVER. https://electro-music.com/forum/viewtopic.php?p=454072#454072 I've had my A6 under dust covers since the year when Alesis went under, buttons and knobs still working fine to this day :) CoolColJ Tue, 27 Jun 2023 10:48:06 -0700 Safe for expression pedal? https://electro-music.com/forum/viewtopic.php?p=453001#453001 Ok, thanks. I think I’ll have to pursue another option (like using an Expert Sleepers disting module). pulsewave Fri, 16 Dec 2022 13:50:39 -0700 Andy randomly changing parameters - similar to sketchy pots https://electro-music.com/forum/viewtopic.php?p=452740#452740 About to attempt this myself. My A6 is from 2007 and for the most part, if I take the time to twiddle all the pots on it back and forth about 10-15 times before playing it, it behaves for that session, and maybe for a week or two after. If I let it si ... rh2y Wed, 19 Oct 2022 19:40:55 -0700 Alesis Andromeda editor app (looking for testers) https://electro-music.com/forum/viewtopic.php?p=451316#451316 Hello everyone!

We are currently in the testing stages of a full-featured editor app for the Alesis Andromeda snyth. We are looking for early testers to get this app ready for public release and are covering every feature on the synth as well as a ...
AndromedaEditor Mon, 21 Feb 2022 16:29:04 -0700
My Alesis Andromeda A6 Editor & VST https://electro-music.com/forum/viewtopic.php?p=449602#449602 Awwwwwwwwwww yeah, look whats in progress: Started working on like the 4th re-write at this point. Because I'm pretty sure I got most of the Andromeda parameters automated at this point -- except the FX pages -- I started re-writing it from the gro ... Pollux Wed, 23 Jun 2021 17:08:43 -0700 Potentiometers - No resistance when turning https://electro-music.com/forum/viewtopic.php?p=448787#448787 Get some velt, make circles out of it to put between the knob and the panel, by adjusting the distance between the knob and the panel you can influence the tactile resistance. Grumble Tue, 06 Apr 2021 02:51:29 -0700 new librarian - Knobkraft https://electro-music.com/forum/viewtopic.php?p=448013#448013 Yes, I did all that.
The connection to the Matrix 1000 works flawlessy, the same setup with the A6 doesn't work at all, so I assumed it was the adaption rather.

I will experiment more and if that fails, I'll post this to the Knobcraft Github.

T ...
schaltstern Mon, 08 Feb 2021 03:31:19 -0700
Not able to upload presets using Sysex Librarian https://electro-music.com/forum/viewtopic.php?p=447835#447835 fyi, I have no problems sending sysex to the andromeda. I'm using this new Librarian (KnobKraft) and the b13 firmware. It's not my work, but I have helped Chris to write an adaptation for the Andromeda. Also the way the A6 is receiving stuff can and n ... markus.schloesser Wed, 20 Jan 2021 20:50:23 -0700 Receiving Program edit buffer dumps https://electro-music.com/forum/viewtopic.php?p=447554#447554 anything ever came out of this?
I'm trying to write an adaptation for the Andromeda for knobcraft, and without being able to send to the edit buffer, I can basically stop right now.

I have a "potential bugs of the A6" list which mentions that this ...
markus.schloesser Mon, 21 Dec 2020 11:38:05 -0700
PC CARD // SRAM 2MB 16-BIT TYPE I https://electro-music.com/forum/viewtopic.php?p=447517#447517 Hello to everybody in this forum of the A6 Synth,

I have a stupid question about the Andromeda A6 sram card and this is if i can put inside a card with sdcard slot to save my banks and to transfer a backup of then easily to my computer or whatever ...
dimifrag Sat, 19 Dec 2020 09:46:19 -0700
a tip for wider sounds / pads https://electro-music.com/forum/viewtopic.php?p=445889#445889 Thanks for sharing! Nice tip :)

p.s!

For anyone with my Andromeda Editor, I actually got around to implementing my idea above, "Parameter Sets" !

And also added the ability to constrain the Randomization with "Min"/"Max" values -- check out ...
Pollux Thu, 30 Jul 2020 16:42:55 -0700
Andromeda Boot problem https://electro-music.com/forum/viewtopic.php?p=443439#443439 Hi!
Sorry to hear of your troubles, there is a thread at Gearslutz that may be of interest to you: https://www.gearslutz.com/board/electronic-music-instruments-and-electronic-music-production/985035-troubleshooting-alesis-a6-andromeda-no-boot.html
...
airlock Thu, 30 Jan 2020 17:33:26 -0700
A6 Filter routing question https://electro-music.com/forum/viewtopic.php?p=441193#441193 don't think so
however you could make 2 different parts
sunny pedaal Tue, 30 Jul 2019 02:53:02 -0700
Waveform morph on Alesis Andromeda A6? https://electro-music.com/forum/viewtopic.php?p=439059#439059 . . . Any ideas on how to get wave morphing (west coast style - triangle slope changes and/or other waveform transformation)???

Also, it'd be great to lag the waveform start time of Osc 1 to get phase offset (compared to Osc 2) too.

http://w ...
MusicMan11712 Sat, 09 Feb 2019 09:32:27 -0700
No attack https://electro-music.com/forum/viewtopic.php?p=437446#437446 i remember that the levels in the vca should be not too hot, 70% seems a good idea if you want that clear , roland like overall sound + no "attack artifacts"

also in the pre and post mixer sections keep things low 25-30%, together 100, no more

t ...
sunny pedaal Mon, 29 Oct 2018 01:48:50 -0700
NRPN Gen 2 for Ableton Live 10 https://electro-music.com/forum/viewtopic.php?p=435895#435895 Check out the details here: http://cdm.link/2018/07/free-ableton-live-tool-lets-you-control-even-more-arcane-hardware/

I will be putting the tool through its paces next week so I will report back on any tips I find for using this with the Andromeda ...
kcoul Thu, 26 Jul 2018 23:20:35 -0700
Andromeda editor for iPad https://electro-music.com/forum/viewtopic.php?p=435797#435797 +1 for recommending a solution like iRig MIDI over WiFi. There's quite a few options nowadays Line6 mobilizer, I also use an Alesis IODock which is quite sturdy if you don't want the iPad floating around. I have a clamp that the iPad can dock to whic ... 8081729 Thu, 19 Jul 2018 12:40:57 -0700 Another chance at a solid editor for the Andromeda https://electro-music.com/forum/viewtopic.php?p=435679#435679 I have been in contact with him asking about the a6 being added. No way other than voting still. But if you haven’t voted yet please vote. There is a new version of the software coming out that will be able to have multi-timbral functionality and ... 8081729 Wed, 11 Jul 2018 16:07:02 -0700