ds7 clone question

ss · Joined: Mar 19, 2007 Posts: 3 Location: brooklyn

hi, im new hear but ive been lurking around for awhile. i was just wondering if anyone had the a parts list for uncle krunkus' stripboard layout for the ds7. if theres one floating around and someone could give it to me i would really appreciate it. i have the pcb parts list but its a little unclear against the stripboard layout. im still kind of new at this.

ss · Joined: Mar 19, 2007 Posts: 3 Location: brooklyn

ok. i should maybe be a little more specific. im wondering if these capacitors are correct for the layout. maybe someone can tell me if im correct or not.....

electrolytic caps
c1 - 10uf
c2 - 3.3uf
c5 - .001uf
c6 - .1uf
c20 - 1uf?

now, is c3 a 3.3uf tantalum capacitor. also, do they all need to be 16v?

Uncle Krunkus · Posted: Wed Mar 21, 2007 5:06 am Post subject:

I'd forgotten that I did that layout! Laughing

I took the designators off the schem which is at the start of the thread. You won't find a .001uF electrolytic, it would be either a polyester or a ceramic. 3.3uF you can get as a tantalum, but a standard electrolytic would work. Tants are always "better", but more expensive too.

ss · Joined: Mar 19, 2007 Posts: 3 Location: brooklyn

great. thanks for the help. love your work by the way.