electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software
post your backlog
Post new topic   Reply to topic Moderators: jksuperstar, Scott Stites, Uncle Krunkus
Page 3 of 5 [123 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Goto page: Previous 1, 2, 3, 4, 5 Next
Author Message
Rykhaard



Joined: Sep 02, 2007
Posts: 1290
Location: Canada

PostPosted: Fri Mar 07, 2008 8:00 am    Post subject: Reply with quote  Mark this post and the followings unread

Heh. Can I mention having to live somewhere where you don't wish to, for the moment? Razz

At LEAST, my backlog isn't growing, whilst I'm not allowed to build. Razz Very Happy lol

Though - with having gotten 3 Tektronix scopes last week for free, it has grown as I do have to work on getting both of the 465's up and running. Smile

On that note again: If anyone is looking for a perfectly working antique (??) Tektronix 647A scope, lemme know. Smile
Back to top
View user's profile Send private message Yahoo Messenger MSN Messenger
Norman Phay



Joined: Jun 29, 2007
Posts: 173
Location: North-East England
Audio files: 1

PostPosted: Fri Mar 07, 2008 9:01 am    Post subject: Reply with quote  Mark this post and the followings unread

Norman Phay wrote:
Much progress! the Cat girl sequencer is completed, and awaits a front panel only!
(......)
Holy crap, guys, I'm on fire here!

This of course assuming it all actually works (cough)


Of course, having posted this, what should land on the doormat, but a bunch of JH krautrock phaser PCBs! That'll teach me to get all uppity, eh.
Back to top
View user's profile Send private message Visit poster's website AIM Address
EdisonRex
Site Admin


Joined: Mar 07, 2007
Posts: 4529
Location: London, UK
Audio files: 169

PostPosted: Sat Mar 08, 2008 1:22 pm    Post subject: Reply with quote  Mark this post and the followings unread

v-un-v wrote:
Dog? But I haven't got a dog Shocked

Oh- your dog?? Shocked

Can I mention the rats and mice too then?? Shocked Laughing


You don't have a near-constant stream of house guests too? Especially on weekends when you might have time to sit down with the iron?

That seems to happen a lot here, although I can't say I regret having friends over. There are other things, like making music, or socialising with good friends, that get in the way of building. I don't actually think that's a bad thing for my life, it is only for my backlog Smile

Which, since last writing, has gotten worse. I really need to knuckle down and get the front panel parts to finish the Klee, let alone the rest of the modules. I still need to actually design what i am going to do with all the 2044 VCFs and the 2 attenuverters, but I think the 19" rack mount for it might be almost ready to design. Picture 6 VCFs, prepatched into 2 attenuverters (stereo?) with spare inputs to add other signals.

Tom, maybe you want to be a house guest for a weekend, then we could sit around in the back room building kits and yakking while the kids hang out in the back garden. Wink

_________________
Garret: It's so retro.
EGM: What does retro mean to you?
Parker: Like, old and outdated.


Home,My Studio,and another view
Back to top
View user's profile Send private message Visit poster's website
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sat Mar 08, 2008 1:28 pm    Post subject: Reply with quote  Mark this post and the followings unread

EdisonRex wrote:

Tom, maybe you want to be a house guest for a weekend, then we could sit around in the back room building kits and yakking while the kids hang out in the back garden. Wink


Shocked

Have you seen my back garden?? Laughing

measuring in at about 8ft by 7ft......... oh and it's raining too! Laughing

PS- 'back room' is in fact the dining room- weighing in at 11ft by 12ft. Big enough as long as you don't have a hobby in making up kits for electronic music!!

Come on Paul- gis a job Wink Laughing

_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sat Mar 08, 2008 1:47 pm    Post subject: Reply with quote  Mark this post and the followings unread

Actually my back garden isn't too bad in the summer, there just ain't much of it. The second picture (1st actually Laughing) was a shot of a load of stuff that got dumped in the house behind us, and that Birmingham shitty council couldn't give a toss about. Then someone set fire to it Shocked

This country sucks. Unless you are loaded of course Shocked Twisted Evil


back garden 1.png
 Description:
 Filesize:  445.86 KB
 Viewed:  8649 Time(s)

back garden 1.png



Back garden 2.png
 Description:
 Filesize:  649.49 KB
 Viewed:  122 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

Back garden 2.png



_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sat Mar 08, 2008 1:52 pm    Post subject: Reply with quote  Mark this post and the followings unread

EdisonRex wrote:

Tom, maybe you want to be a house guest for a weekend, then we could sit around in the back room building kits and yakking while the kids hang out in the back garden. Wink


Ahh- I got you! An invite? Shocked Embarassed Laughing

The only problem with this kind of activity, is that it wouldn't go down well with the Fuhrer here. I think this is part of the problem why I never get finished any of >my own< projects! Laughing Laughing Laughing

_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
EdisonRex
Site Admin


Joined: Mar 07, 2007
Posts: 4529
Location: London, UK
Audio files: 169

PostPosted: Sat Mar 08, 2008 1:55 pm    Post subject: Reply with quote  Mark this post and the followings unread

We could PM about how to sell the concept. Maybe others in the area want to meet up and yak whilst working on stuff too. It's something I envy those guys in NYC for, there are enough people to get together and work on stuff in the company of people who also understand and want to get stuff done. Plus equipment can be shared, maybe parts exchanged. I might fork this idea into a new thread.
_________________
Garret: It's so retro.
EGM: What does retro mean to you?
Parker: Like, old and outdated.


Home,My Studio,and another view
Back to top
View user's profile Send private message Visit poster's website
seraph
Editor
Editor


Joined: Jun 21, 2003
Posts: 12092
Location: Firenze, Italy
Audio files: 33
G2 patch files: 2

PostPosted: Sat Mar 08, 2008 4:11 pm    Post subject: Reply with quote  Mark this post and the followings unread

v-un-v wrote:
...Then someone set fire to it Shocked


it looks familiar Shocked I don't remember why Rolling Eyes

_________________
homepage - blog - forum - youtube

Quote:
Politics is the entertainment division of the military industrial complex - Frank Zappa
Back to top
View user's profile Send private message Visit poster's website
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sat Mar 08, 2008 4:26 pm    Post subject: Reply with quote  Mark this post and the followings unread

It's funny how the first image has been viewed 25 times and the 2nd one not at all. Shocked

Do you guys have some sort of pyromania fetish or something? Shocked Rolling Eyes

_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sat Mar 08, 2008 4:27 pm    Post subject: Reply with quote  Mark this post and the followings unread

EdisonRex wrote:
We could PM about how to sell the concept. Maybe others in the area want to meet up and yak whilst working on stuff too. It's something I envy those guys in NYC for, there are enough people to get together and work on stuff in the company of people who also understand and want to get stuff done. Plus equipment can be shared, maybe parts exchanged. I might fork this idea into a new thread.


I think that could be fun- and a laugh too! Idea

_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
Photon



Joined: Mar 22, 2005
Posts: 363
Location: Boston
Audio files: 1

PostPosted: Sat Mar 08, 2008 5:20 pm    Post subject: Reply with quote  Mark this post and the followings unread

nice view, Tom. A few plants can go along way to combat urban dreariness.

My neighborhood looks fairly post-apocalyptic. The other day I was walking a block from my flat and there was a small pile of dead fish on the side walk (!)

By the way I saw the Pram issue of the Wire a couple months back. PROUD!
Back to top
View user's profile Send private message Visit poster's website AIM Address
janvanvolt



Joined: Nov 24, 2005
Posts: 285
Location: Mainz, Germany

PostPosted: Sat Mar 08, 2008 5:36 pm    Post subject: Reply with quote  Mark this post and the followings unread

I checked my backlog, and it's actually slowly getting less (due to the "more" time i have now), but still impressive:

Partial Done:
MFOS DUAL A-R
MFOS SPACE RING MODULATOR
MFOS MINI CONTROLLER
JH SCHULTE PHASER
THD-107A VC QUAD FUNC

Finished, awaiting panel:

THD-107A VC QUAD FUNC
MEAN SUCKER VCF x 2
WOGGLEBUG#3

Debugging needed:
BD-909 Bassdrum
TH101-01 thomas henry VCO

Panels done, awaiting assembled PCB:
- TOOL Module
- SWITCH Tool and CLOCK DIV Module

not started yet:
- YUSYNTH Standards module
- YUSYNTH MINMAX

Mostly i am waiting for parts / PCB but the debugging will also take time.

_________________
Homepage - http://www.czmok.de
My dIY - http://diy.czmok.de
Film/Music - http://gfm.me
Back to top
View user's profile Send private message Visit poster's website AIM Address
Coriolis



Joined: Apr 11, 2005
Posts: 616
Location: Stilling, Denmark

PostPosted: Sun Mar 09, 2008 12:54 am    Post subject: Reply with quote  Mark this post and the followings unread

I have to ask: Whats the MEAN SUCKER VCF? Laughing
Will you do a run of pcb's for that? Pleeeeease?
Just kidding... Wink

C
Back to top
View user's profile Send private message Visit poster's website
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sun Mar 09, 2008 2:25 am    Post subject: Reply with quote  Mark this post and the followings unread

Photon wrote:


By the way I saw the Pram issue of the Wire a couple months back. PROUD!


Very Happy

Yeah we got calls from all over the world to say how nice it was to see them on the front cover Very Happy

I'm gonna see if they fancy doing an ep featuring the Klee! Cool Idea

(gotta build it yet. Got the parts- need the PCB's next Shocked Laughing )


Pram on wire.png
 Description:
 Filesize:  500.15 KB
 Viewed:  108 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

Pram on wire.png



_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
janvanvolt



Joined: Nov 24, 2005
Posts: 285
Location: Mainz, Germany

PostPosted: Sun Mar 09, 2008 11:35 am    Post subject: Reply with quote  Mark this post and the followings unread

Coriolis wrote:
I have to ask: Whats the MEAN SUCKER VCF? Laughing
Will you do a run of pcb's for that? Pleeeeease?


It's a small VCF based on Tubes:

http://flickr.com/photos/jczmok/sets/72157603946504601/

Schemas and Sound samples:

http://matrixsynth.blogspot.com/2008/01/mean-sucker-vcf.html

_________________
Homepage - http://www.czmok.de
My dIY - http://diy.czmok.de
Film/Music - http://gfm.me
Back to top
View user's profile Send private message Visit poster's website AIM Address
v-un-v
Janitor
Janitor


Joined: May 16, 2005
Posts: 8932
Location: Birmingham, England, UK
Audio files: 11
G2 patch files: 1

PostPosted: Sun Mar 09, 2008 2:05 pm    Post subject: Reply with quote  Mark this post and the followings unread

Shocked

How many components?? Shocked

Even I could build that- possibly even when doing the washing up, or eating a meal! Laughing

Mad filter! Thanks for that.

_________________
ACHTUNG!
ALLES TURISTEN UND NONTEKNISCHEN LOOKENPEEPERS!
DAS KOMPUTERMASCHINE IST NICHT FÜR DER GEFINGERPOKEN UND MITTENGRABEN! ODERWISE IST EASY TO SCHNAPPEN DER SPRINGENWERK, BLOWENFUSEN UND POPPENCORKEN MIT SPITZENSPARKSEN.
IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN. DER RUBBERNECKEN SIGHTSEEREN KEEPEN DAS COTTONPICKEN HÄNDER IN DAS POCKETS MUSS.
ZO RELAXEN UND WATSCHEN DER BLINKENLICHTEN.
Back to top
View user's profile Send private message Send e-mail
EdisonRex
Site Admin


Joined: Mar 07, 2007
Posts: 4529
Location: London, UK
Audio files: 169

PostPosted: Mon Mar 10, 2008 10:00 am    Post subject: Reply with quote  Mark this post and the followings unread

Well, my kid has run out of Velleman kits to build, and his soldering technique is looking pretty good now. So I went through the parts list on my two SN Super Controller boards and kitted the resistors and capacitors. Hopefully he'll be as careful building these as his little kits. This is a lot more advanced, and doesn't have the instant gratification that the little kits have.

But it might help my backlog a bit!

_________________
Garret: It's so retro.
EGM: What does retro mean to you?
Parker: Like, old and outdated.


Home,My Studio,and another view
Back to top
View user's profile Send private message Visit poster's website
Etaoin



Joined: Jun 30, 2005
Posts: 760
Location: Utrecht, NL

PostPosted: Sat Mar 15, 2008 2:42 am    Post subject: Reply with quote  Mark this post and the followings unread

unit-sound wrote:

Schemas and Sound samples:

http://matrixsynth.blogspot.com/2008/01/mean-sucker-vcf.html


I actually posted the link and my pcb design on this forum first. Matrixsynth just "stole" it from EM Very Happy
http://www.electro-music.com/forum/topic-23067.html

_________________
http://www.casia.org/modular/
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
Norman Phay



Joined: Jun 29, 2007
Posts: 173
Location: North-East England
Audio files: 1

PostPosted: Fri Apr 04, 2008 9:58 am    Post subject: Reply with quote  Mark this post and the followings unread

Oakley "Little Lag" COMPLETED!
Oakley VCO x 2 BOTH COMPLETED!!
Merely awaiting panels, ordered from Schaeffer & on the way

DB120 add-on for MOTM sub-octave multiplexer COMPLETED! Going to stick it behind a panel (which I have) tonight

CGS sequencer COMPLETED less panel

Oakley Octal Resonator awaits ONE capacitor!

DB320 board for MOTM LFO awaits ONE molex plug!

JH triple chorus boards await package from Mouser ARRIVING TOMORROW!

Holy crap, eh?

Also, Holy crap at the price of tantalum electrolytics, dear god.
Back to top
View user's profile Send private message Visit poster's website AIM Address
sduck



Joined: Dec 16, 2007
Posts: 442
Location: Nashville
Audio files: 5

PostPosted: Sun Apr 06, 2008 8:20 pm    Post subject: Reply with quote  Mark this post and the followings unread

Ooh! Can I play too?

TH Mankato

2 wogglebugs

Klee

Blacet Hex Zone (convert to motm format)

motm 300 vco

motm 410 filter

motm ??? mixer (this one and the last one whenever PS gets around to sending them to me)

Some badass cv emitting implementation of these joysticks I bought from deviever

several other blacet to motm conversions

fixing that broken key on the jd-800

new cabinet - the old one is full

that buchla 281 thing when I get the pcb's

these are all in various states of partiness or partslessness - at least some of everything is here, or at least paid for.

oh - I forgot - tellun db-800 add-on boards for all my motm 800's
Back to top
View user's profile Send private message
Budgrubber



Joined: Dec 27, 2006
Posts: 69
Location: USA

PostPosted: Wed Apr 09, 2008 12:47 pm    Post subject: Reply with quote  Mark this post and the followings unread

I think that the idea of this thread is great. Piling them all up together like this is embarrassing. I was doing so well keeping the backlog manageable . . . for a while. I knew that I would not get around to building up several of these any time soon, but I did not want to miss out on the various runs of PCBs. I have already sourced the parts for some of them though and have no excuse. My big plan to double the size of my modular’s cabinet was met with a stern grimace from the wife however. I will have to let her warm up to that idea for a while first.


backlog of projects.jpg
 Description:
 Filesize:  641.97 KB
 Viewed:  118 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

backlog of projects.jpg


Back to top
View user's profile Send private message
a.b.o.z.



Joined: Feb 07, 2007
Posts: 350
Location: Zagreb, Croatia
Audio files: 7
G2 patch files: 4

PostPosted: Wed Apr 09, 2008 1:52 pm    Post subject: Reply with quote  Mark this post and the followings unread

waiting for futurlec to come. hope to be done till end of april.
cabinet
digisound psu
yusynth minimoog vcf clone
TH XR VCO
TH VCA-1
Back to top
View user's profile Send private message
Norman Phay



Joined: Jun 29, 2007
Posts: 173
Location: North-East England
Audio files: 1

PostPosted: Sun May 25, 2008 5:22 pm    Post subject: Reply with quote  Mark this post and the followings unread

Well, I got the Oakley VCOs all wired up behind the panel, and fully calibrated, and they work great, I'm very impressed with them, I've been caning them all night, and they have a real strong, musical sound, and track through the octaves very well. I would say that they are the most euphonic-sounding VCOs I have.

The Little lag I got wired up and completed a week or two ago, and that's a handy little thing as well. good to put an envelope through it and extend the attack and decay/release times, that works pretty well.

The DB-120 and MOTM-120 I got all joined together nicely, and the panel is bolted into one of my 2 Cynthia sixpacs. The additional features on the DB120 are not totally essential TBH, the MOTM-120 is a great module all on its own, but it's all a bit of extra fun, and the staircase wave is a pretty cool CV source.

I have a Cat-girl sequencer panel and a panel for 2 of Fonik's mixer-attenuverters all ready to order, I'll order them on Tuesday, so that'll be 2 pieces more nearly finished.

OTOH, I have the JH freq-shifter here, a set of boards for a Buchla 281 clone and a pair of Fonik triple resonators too, so I never ever learn, do I.
Back to top
View user's profile Send private message Visit poster's website AIM Address
Pehr



Joined: Aug 14, 2005
Posts: 1307
Location: Björkvik, Sweden
Audio files: 2

PostPosted: Fri Oct 10, 2008 5:07 am    Post subject: Reply with quote  Mark this post and the followings unread

Buchla 281 clone (troubleshooting)
2x A.C. Envylopes (VCADSR)
4x MFOS Quantizer
2xMFOS Updated and Improved VCOs
XR-VCO
Sonic Multiplier
Ian Fritz 5-pulser
Yusynth Wavefolder
Nikros Analog Bucket Brigade Delay
Nikros Optical Compressor (stereo)

_________________
YouTube channel
flickr photostream
http://loxodrom.blogspot.com
http://www.garageband.com/artist/loxodrom
http://soundcloud.com/loxodrom
Back to top
View user's profile Send private message
EdisonRex
Site Admin


Joined: Mar 07, 2007
Posts: 4529
Location: London, UK
Audio files: 169

PostPosted: Sun Oct 19, 2008 7:08 am    Post subject: Reply with quote  Mark this post and the followings unread

My backlog is now up to 22 modules. I seem to be going the wrong way... Sad

However I managed to pick up some sheet metal and cut some panels out, which has been the problem. I picked up 4 AM3030 VCOs, minus front panels, and quickly figured out these are not gonna be Frac-able. So I cut out some Dotcom sized panels for them and prototyped up a panel layout.

I also cut out 4 more double wide Frac panels, so I can get the T/G/T/S/H, one of the SSM2044 filters, an Attenuverter and my Yusson mixer into Frac format. That'll fill out the Frac for now, I guess I'm going to be multi-formatted Cool

Edit: got the panel done, just a small matter of wiring it and figuring out how to mount this board that wants a special mount.


PICT0013.JPG
 Description:
 Filesize:  445.96 KB
 Viewed:  101 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

PICT0013.JPG



AM3030.JPG
 Description:
 Filesize:  409 KB
 Viewed:  99 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

AM3030.JPG



_________________
Garret: It's so retro.
EGM: What does retro mean to you?
Parker: Like, old and outdated.


Home,My Studio,and another view
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic Moderators: jksuperstar, Scott Stites, Uncle Krunkus
Page 3 of 5 [123 Posts]
View unread posts
View new posts in the last week
Goto page: Previous 1, 2, 3, 4, 5 Next
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use