this is just a shoprt sample how i use the baby10 to control the klee.
the klee controls two voices (EFM VCOs, ssm0244, LPG). the CVs for pitch are fed to the dopefer quantizer. the base frequency of the quantizer is controlled by the baby10. the master LFO clocks the klee and a divider, which ckocks the baby10:
Here's another quickie. In the same vein as the previous ones, but this time with 3 voices, and added another active pot so there's quite a bit more harmonic variation. To make the filters a bit more interesting I added some lfo's to each, which sounded pretty good on the studio monitors but got a bit tedious while I was listening closer while adding the reverb - what the heck.
woops - it seems I've reached my maximum upload quota limit - time for plan b....
aargh. forgot to mention the last piece in chain: the LM1036 audio processor. the panning was controlled by one of the klees gate outputs (can't remember which one, patch is overwritten).
I'm curios - how difficult is it to quantize Klee sequences?
hehe, you are joking? actually it needed no quantizing, i just put the sliders in down, up and middle position, so it is quantized by the range switch. i used the quantizer do shift the CVs by the baby10 (could have done it by a mixer, but the quantizer gives more possibilities, like minor or major scale and such...). _________________
Here's a little noodle I've been playing with.
I didn't touch a thing during the recording. It's just a fairly simple theme dialed into the Klee, with the active bits set to random.
Sent to the ASM-2 and recorded as the noise from the ASM-2 adds various numbers of active bits. Let me know if you want a full breakdown.
Then I applied way too much reverb in Soundforge.
I left this running for an hour or so and still didn't get sick of it. It just keeps coming up with new ideas, and keeps returning to it's simple little line, and then back to the single pulsing note.
Joined: Feb 18, 2007 Posts: 204 Location: Victoria, BC
Audio files: 1
Posted: Sun Sep 28, 2008 7:27 am Post subject:
I was monkeying around with an old delay yesterday, running the Klee with 2 voices and an intermittent click from an old Paia Gnome triggered by the Klee Gate 3. Voice 1 is the awesome TH-VCO1/Mankato combo and Voice 2, well I'm not happy with it, 'nuff said. Golden pots settings on the Klee, 2 active bits. I'm just working 2 gate switches for the changes. At some point I flick on the envelope long switches ala Scott Stites to let a bit more thru.
Long live the Klee.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
Please support our site. If you click through and buy from our affiliate partners, we earn a small commission.