electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software » Jürgen Haible designs
Photos of what you've built with JH PCBs
Post new topic   Reply to topic Moderators: Scott Stites
Page 3 of 9 [207 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Goto page: Previous 1, 2, 3, 4, 5, 6, 7, 8, 9 Next
Author Message
Adam-V



Joined: Jan 29, 2007
Posts: 300
Location: Australia
Audio files: 1

PostPosted: Sun Apr 19, 2009 3:52 pm    Post subject: Reply with quote  Mark this post and the followings unread

moosapotamus wrote:
Thanks! Cool

I used Inkscape to do the graphics on the computer. Printed the image out on an iron-on transfer, the kind for ironing on to dark colored t-shirts. Ironed it on to the face of the enclosure and gave it a few coats of clear lacquer. I've been doing my stompbox graphics this way for years and it seems to hold up really well.

~ Charlie


That is sheer genius Charlie. Looks like it yields excellent results.

Cheers,
Adam-V

_________________
Digitalis Effect | Fractured Symmetry (www.spiralsect.com)
Back to top
View user's profile Send private message Visit poster's website
funkyfarm



Joined: Jan 21, 2007
Posts: 583
Location: France
Audio files: 3

PostPosted: Tue May 26, 2009 3:10 pm    Post subject: Reply with quote  Mark this post and the followings unread

Quote:
Big Caps Tau !Posted Image, might have been reduced in size. Click Image to view fullscreen.


And now with its panel and pots and all.
I definitely love these smallbear knobs. (in the pix above, banzai ones were too big for me)

http://sslstudiodesign.free.fr/TAU/DSC02243.JPG

.fpd
Back to top
View user's profile Send private message
jhaible



Joined: May 25, 2007
Posts: 2014
Location: Germany
Audio files: 24

PostPosted: Tue May 26, 2009 11:02 pm    Post subject: Reply with quote  Mark this post and the followings unread

Love those rectangular LEDs!

How do you mount them on the front panel?

JH.

_________________
"I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
funkyfarm



Joined: Jan 21, 2007
Posts: 583
Location: France
Audio files: 3

PostPosted: Tue May 26, 2009 11:33 pm    Post subject: Reply with quote  Mark this post and the followings unread

jhaible wrote:
Love those rectangular LEDs!

How do you mount them on the front panel?

JH.


I don"t dare to say... (breadboard and white silicon are clues...)
Back to top
View user's profile Send private message
mono-poly



Joined: Jul 07, 2004
Posts: 935
Location: Rotterdam, Netherlands
Audio files: 2

PostPosted: Wed May 27, 2009 2:42 am    Post subject: Reply with quote  Mark this post and the followings unread

Where did you got those skirted knobs numbertalk?

Cool desigsn guys!
Back to top
View user's profile Send private message
numbertalk



Joined: May 05, 2008
Posts: 980
Location: Austin, TX
Audio files: 5

PostPosted: Thu May 28, 2009 6:32 am    Post subject: Reply with quote  Mark this post and the followings unread

That's a good question Smile I can't remember offhand. Going to do some digging and hopefully get back to you. I love them too, so hopefully I can find them again to get more.

mono-poly wrote:
Where did you got those skirted knobs numbertalk?
Back to top
View user's profile Send private message
dingebre



Joined: Aug 10, 2008
Posts: 263
Location: Salt Lake City, UT USA

PostPosted: Sun May 31, 2009 6:30 pm    Post subject: Reply with quote  Mark this post and the followings unread

Well, all done. A scare with the calibration, but JH was patient and helpful, THANKS!

Tobias supplied the parts, which included wire bundles with connectors on one side already. I can highly recommend the kits Tobias puts together.

The name is in Bulgarian and translates to JH Frequency Shifter. It's a FracRack format and I turned the Mic input into an "audio input" and kept the aux input and normalization. Very cool little module.


IMG_9695 resize_resize.jpg
 Description:
 Filesize:  160.51 KB
 Viewed:  150 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_9695 resize_resize.jpg



_________________
David M. Ingebretsen, M.S., M.E.
Collision Forensics & Enginering, Inc.

dingebre@3dphysics.net
http://www.xmission.com/~dingebre/Synthasystem.html

Last edited by dingebre on Sun Aug 23, 2009 10:19 am; edited 3 times in total
Back to top
View user's profile Send private message
sduck



Joined: Dec 16, 2007
Posts: 443
Location: Nashville
Audio files: 5

PostPosted: Sun May 31, 2009 7:47 pm    Post subject: Reply with quote  Mark this post and the followings unread

Wow, David, that looks great. That's how wiring is supposed to look, unlike mine.

Here's mine, which I just finished -

JH FS1a installed

JH FS1a side1

These are hosted on flickr - you can click through to see them and more in higher resolution, etc.
Back to top
View user's profile Send private message
dingebre



Joined: Aug 10, 2008
Posts: 263
Location: Salt Lake City, UT USA

PostPosted: Sun May 31, 2009 8:09 pm    Post subject: Reply with quote  Mark this post and the followings unread

Thanks for the compliment. by far the most complex project I've undertaken so far, and the most fun.

I love to see other's ideas and techniques.

David

_________________
David M. Ingebretsen, M.S., M.E.
Collision Forensics & Enginering, Inc.

dingebre@3dphysics.net
http://www.xmission.com/~dingebre/Synthasystem.html
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Tue Jun 02, 2009 3:14 pm    Post subject: Reply with quote  Mark this post and the followings unread

very nice module dingebre, looks like some dence nuclear testing modules

with those stacked pcb's and big red/black cables
Back to top
View user's profile Send private message
JoeMorris



Joined: Apr 26, 2009
Posts: 160
Location: Brighton

PostPosted: Thu Jun 04, 2009 5:06 am    Post subject: Reply with quote  Mark this post and the followings unread

very much on the cheap, cheerful, rough and ready side, here's my tau and triple chorus:

Posted Image, might have been reduced in size. Click Image to view fullscreen.

as you can see, it's been a bit of a learning curve keeping the drill steady and straight! got a bit of wonky charm in the rack though. And make my cheetah sound lllllllllovely, most importantly. Went with the ultra cheap abs cases, despite someone saying they werent good for music on this forum. Seem to work fine though. Im on a budget, ya heard!
I quite like the no writing element, probably a non-starter if you are talking modular synths though, unless you have photographic memory.
Back to top
View user's profile Send private message
Funky40



Joined: Sep 24, 2005
Posts: 875
Location: Swiss
Audio files: 1
G2 patch files: 5

PostPosted: Sun Jun 07, 2009 12:06 am    Post subject: Reply with quote  Mark this post and the followings unread

My StringFilter in Eurorack format beside my Tau #2


IMG_0104e.jpg
 Description:
String Filter and Tau Phaser in Eurorack Format ( running on +-15V )
 Filesize:  80.56 KB
 Viewed:  142 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

IMG_0104e.jpg


Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Fri Jun 19, 2009 1:27 pm    Post subject: Reply with quote  Mark this post and the followings unread

ok,this one is now done any works,oeff..
(just need to calibrate it)

Wonderfull module,thank u very much Juergen!
Back to top
View user's profile Send private message
frenchyinmunich



Joined: Jun 23, 2009
Posts: 105
Location: Germany

PostPosted: Tue Jun 23, 2009 9:44 pm    Post subject: Re: JH Frequency Shifter
Subject description: Pic of Freq Shifter
Reply with quote  Mark this post and the followings unread

riley smith wrote:
I just finished building Jurgen's Frequency Shifter and it sounds - quiet and clean. I'm so used to hearing digital pitch shifters that I was surprised not to hear the window glitching. For small shift amounts this one can't be beat.

Very impressive design. It sounds amazing for "natural" sounds such as voice and instruments, but is also a great timbral modifier for synthesized sounds. I've always wanted a pitch shifter and I wasn't disappointed. It was a big project, but I had a lot of fun building it. Thanks Jurgen!

I had the front panel ecthed at Front Panel Express up in Seattle Washington. Nice folks and they did a great job. The panel is based on Jurgen's orginal hand drawn design with a few small mods. I'm happy with the control layout.

- Riley


Riley, That a nice job.

Where did you get you knobs?
The trade?

C.U.

Francois
Back to top
View user's profile Send private message
riley smith



Joined: Sep 04, 2008
Posts: 10
Location: santa cruz, ca

PostPosted: Wed Jun 24, 2009 10:33 pm    Post subject: FS Knobs Reply with quote  Mark this post and the followings unread

They're Kilo knobs. I think I got them from Allied electronics here in the US. Nice machined aluminum, but not cheap. I think the big ones were about $12 each.

- Riley
Back to top
View user's profile Send private message
JoeMorris



Joined: Apr 26, 2009
Posts: 160
Location: Brighton

PostPosted: Thu Jul 09, 2009 12:28 pm    Post subject: Reply with quote  Mark this post and the followings unread

Here's my last couple of bits, very bad cameraphone photos!
Krautrock phaser
Posted Image, might have been reduced in size. Click Image to view fullscreen.
and SUbtle chorus (the black monolith at the top, Im gonna get a different knob at some point..)
Posted Image, might have been reduced in size. Click Image to view fullscreen.
Back to top
View user's profile Send private message
Fetafarmer



Joined: Jul 29, 2007
Posts: 32

PostPosted: Sun Jul 19, 2009 11:42 am    Post subject: Tau Reply with quote  Mark this post and the followings unread

Here's my Tau. I keep forgetting to post it : )

Kevin


TauPanel02.jpg
 Description:
 Filesize:  68.24 KB
 Viewed:  162 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

TauPanel02.jpg


Back to top
View user's profile Send private message
The Bad Producer



Joined: Mar 08, 2009
Posts: 257
Location: The Manhole

PostPosted: Sun Jul 26, 2009 9:24 am    Post subject: Reply with quote  Mark this post and the followings unread

Love your panel Fetafarmer, what font is that you're using?

I've just finished some JH stuff I built for someone else, I hope you like it!

(I'm not sure I want to get rid of it now!)

Charlie


tksw rack.JPG
 Description:
 Filesize:  78.89 KB
 Viewed:  301 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

tksw rack.JPG


Back to top
View user's profile Send private message Visit poster's website
Fetafarmer



Joined: Jul 29, 2007
Posts: 32

PostPosted: Wed Jul 29, 2009 2:10 am    Post subject: Reply with quote  Mark this post and the followings unread

The Bad Producer wrote:
Love your panel Fetafarmer, what font is that you're using?



I believe it's FPD's "Helvetica 4-stroke," done with the 0.2 thickness tool. Not sure what the various size or skew numbers are - I set them once years ago, and just copy and paste when making new panels.

It may be helpful to note that you can split words up into multiple text objects, then manually align them as a workaround for FPD's rigid text kerning (where some letter combinations appear so distant to one another that it almost looks as if an accidental "space" has been included).

Cheers,
Kevin
Back to top
View user's profile Send private message
TekniK



Joined: Aug 10, 2008
Posts: 1062

PostPosted: Wed Aug 05, 2009 1:17 pm    Post subject: Reply with quote  Mark this post and the followings unread

full completed phaser
Last edited by TekniK on Thu Aug 19, 2010 4:03 am; edited 1 time in total
Back to top
View user's profile Send private message
lexvortex



Joined: May 14, 2008
Posts: 155
Location: Toronto

PostPosted: Fri Aug 07, 2009 2:18 pm    Post subject: Reply with quote  Mark this post and the followings unread

Hi, here are my three JH projects. The Frequency shifter, Dimension D, and the Triple Chorus. All were a pleasure to build and sound fantastic. Thanks JH I'm looking forward to building more of your projects Very Happy Very Happy

Cheers,
Dave


Freq sh side.jpg
 Description:
Frequency Shifter Side
 Filesize:  141.44 KB
 Viewed:  13930 Time(s)

Freq sh side.jpg



DimD side.jpg
 Description:
Dimension D side
 Filesize:  146.33 KB
 Viewed:  13930 Time(s)

DimD side.jpg



Freq sh front.jpg
 Description:
Frequency Shifter
 Filesize:  123.49 KB
 Viewed:  158 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

Freq sh front.jpg



DimD full.jpg
 Description:
Dimension D
 Filesize:  119.94 KB
 Viewed:  161 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

DimD full.jpg



Triple ch front.jpg
 Description:
Triple Chorus
 Filesize:  122.19 KB
 Viewed:  154 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

Triple ch front.jpg


Back to top
View user's profile Send private message Visit poster's website
davebr



Joined: Jun 09, 2007
Posts: 191
Location: portland, or

PostPosted: Fri Aug 07, 2009 3:58 pm    Post subject: Variable Slope Filter / Phaser
Subject description: Variable Slope Filter / Phaser
Reply with quote  Mark this post and the followings unread

Posted Image, might have been reduced in size. Click Image to view fullscreen.

http://modularsynthesis.com/jhaible/varislope/varislope.htm
Back to top
View user's profile Send private message
softfin



Joined: Oct 11, 2006
Posts: 264
Location: Far in the north
Audio files: 1

PostPosted: Mon Aug 17, 2009 1:47 am    Post subject: Finished my Living VCOs Reply with quote  Mark this post and the followings unread

thanks for your time designing these and of course for providing these boards. These modules sure brought some additional "life" to my modular. Especially the Living VCOs were far better than what I expected!! They certainly have some of that Yamaha CS-series character/feel that I totally love!


PICT0887.JPE
 Description:
Here's my Variable slope filter/phaser...and a pair of Threelers on the left.
 Filesize:  787.74 KB
 Viewed:  156 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

PICT0887.JPE



PICT0890.JPE
 Description:
Living VCOs packed tightly in euro format.
 Filesize:  713.57 KB
 Viewed:  134 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

PICT0890.JPE


Back to top
View user's profile Send private message
jhaible



Joined: May 25, 2007
Posts: 2014
Location: Germany
Audio files: 24

PostPosted: Mon Aug 17, 2009 2:03 am    Post subject:  My latest Project Reply with quote  Mark this post and the followings unread

Thanks to God who made this happen!
For long weeks it didn't seem my daughter would make it till the day she was born. But here she is - and thanks to all who prayed for us!

JH.


anais_erster_tag1.jpg
 Description:
 Filesize:  241.81 KB
 Viewed:  157 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

anais_erster_tag1.jpg



_________________
"I tell you the truth, if anyone says to this mountain, 'Go, throw yourself into the sea,' and does not doubt in his heart but believes that what he says will happen, it will be done for him. Therefore I tell you, whatever you ask for in prayer, believe that you have received it, and it will be yours." (Mk 11,23f)
Back to top
View user's profile Send private message Send e-mail Visit poster's website
softfin



Joined: Oct 11, 2006
Posts: 264
Location: Far in the north
Audio files: 1

PostPosted: Mon Aug 17, 2009 2:13 am    Post subject: Reply with quote  Mark this post and the followings unread

Congrats!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic Moderators: Scott Stites
Page 3 of 9 [207 Posts]
View unread posts
View new posts in the last week
Goto page: Previous 1, 2, 3, 4, 5, 6, 7, 8, 9 Next
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » Jürgen Haible designs
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use