How can I save the global octave setting?

nosajthing · Joined: Jun 30, 2008 Posts: 8 Location: los angeles

Hello,

I want to use the G2 to control my software instruments. I can change the octave of my software instruments if I open the G2 editor>synth setting>click on Global Octave change. If I power cycle the G2, the setting gets lost. Is there a way to save that setting?

Thanks in advance!

ian-s · Posted: Mon Jun 30, 2008 1:41 pm Post subject:

It is saved if you store the patch after changing.

nosajthing · Joined: Jun 30, 2008 Posts: 8 Location: los angeles

Thanks so much...I didn't know that it save it to the patch because it listed global.

blue hell · Posted: Mon Jun 30, 2008 2:29 pm Post subject:

The synth global settings should be saved when "memory protect" is off, that's in the same dialog lower left corner, by default it's on.

nosajthing · Joined: Jun 30, 2008 Posts: 8 Location: los angeles

thank you!

nosajthing · Joined: Jun 30, 2008 Posts: 8 Location: los angeles

Hi guys,
I tried both suggestions and they didn't work. As soon as I power cycler the Nord...the Global setting is off. I made sure that the memory protect was off and I also saved it to a few patches. Any other ideas?

Thanks

nosajthing · Joined: Jun 30, 2008 Posts: 8 Location: los angeles

I found a work around for now. Holding shift then octave will toggle to global octave

blue hell · Posted: Sun Jul 13, 2008 5:31 pm Post subject:

This seems to be a bug, all other settings are saved when memory protect is off ... well I didn't try all, but some ... and it's the same here, octave shift gets lost when I power cycle.

Sorry for not trying that myself earlier.