Roland Kuit's G2 SoundLab I, The Electronic Studio

[Roland Kuit]

this is for the update chapter history only and as a gift. the other ideas/patches are to much scattered over the rest of the chapters.

[Oli]

[Roland Kuit]

Thanx Oli. But have a bit patience. Im doing sound design for a company now, and meanwhile writing an EMS tutorial. I hope to do it in 4/5 months.
oeps, knowing me, it will take longer. Im never finished because then I would stop thinking?

ps:
http://www.nordkeyboards.com/main.asp

[Wout Blommers]

[Roland Kuit]

I contacted their web guy, not Tomas.

[Oli]

[DN]

Anyone know the average delivery time to the states? I ordered in early-mid December and have yet to receive it...

[Roland Kuit]

i havent seen your ask,
or on paypal.
you can pm me here. or at:
http://www.nordkeyboards.com/main.asp

[DN]

Hrm.. Sent a message but it's still in the outbox.

[Wout Blommers]

The Forum software is fully functional...

Wout

[Roland Kuit]

Hi,
E-lessons at
At my website thanks!]

[drumfish]

hi roland, i pop in just to say that i'm so impressed of the work you've done in this tutorial ... just amazing really ... i baught this cd to help me using my g2 as i'm not a professional & i'm so pleased that there is so much more inside ... history of electronic music with an attached video on every picture ... great idea ... few softwares ... 10 actually (shame the arp software is not mac compliant but it's fine) & the synthesis tutorial ... massive. ok i stop ... guys i don't get payed to give this feedback ... it's free to tell people when they're talented & i recommend this tutorial to any electronic music fan ... so much to learn ... great job roland

[Roland Kuit]

I have a few addons for the chapter Logic.
In the chapter House/Techno II I explained how to make Groove Models with use of LFO modules.
But I was thinking this could be done by using the Logic Delay module too.
So I came up with this:
As last patch example in the chapter Logic/Delay you can add this one.
As you see, the triggering goes through the delay modules. the amount of delay is modulated by the pattern module. The level of this modulation can be fine tuned in the mixer module. The total modulation level is set by the groover module(a constant module).

[drumfish]

thanks for updating your tuto, specialy the logic chapter as i'm wedged on the logic & switch modules ... i kind of know every other modules but these two are giving me hard times

[ethnix73]

This tuturial is really a huge work, full of information, and really helpfull!!!!

Thanks mister Roland Kuit!

[Roland Kuit]

Thank you, guys.
I promished you to update stuff, so here is an other Groover model.
For the chapter Logic, the 8Counter module. In this example every input of this module is filed. This is not nececerry, for different rhrythmic fx, some inputs can be left empty.

[drumfish]

hi roland, thanks for the patch, you use a level module to generate some randomness within the random pattern module ?! ... i must reconsider my all work with the g2 ... i print out your tutorial & will get deep into it ... i'm too much like osc-filter-envellope-fx ... i need to explore this synth a lot more

[Roland Kuit]

3 level modules, set on different level are fed into the 4switch module. leaving 1 input open. this is an easy way to give the pattern generator a different static choice. in the chapter House/Techno II however, i explain how to change patterns over time. without lifting a finger:)
the contstant module, called groover in this circuit, expanses the overall
logic delay time, while you can fine tune the pattern generators modulation signal in the mixer.

[Roland Kuit]

Again a chapter Logic update:
The Shuffler model.
This patch is a Groover model but extended with a Value Switch module. This module measures the incoming control signal to the matching number witch can be set. To create a shuffle, there is the need for a high rate trigger signal.. Instead output 1/16 from the Clock Generator module, the output 1/96 is used. Divided by three in the Clock Divider module. The shuffle is made by the Logic Gate module. At the first input the 1/16 trigger signal from the Clock Generator module and the 1/32 trigger signal from the Value Switch module are coming out only when there is a trigger signal on both inputs, the AND gate. Hereafter the signal goes into the OR gate with on the other input the other (1/32 trigger) signal output from the Value Switch module.

[Roland Kuit]

New patch for into the chapter Tips&Tricks:
At my website thanks!

[G2egory]

I can't wait to receive my copy of Mr. Kuit's tutorial. I ordered mine a few weeks ago and am patiently waiting for it to make its trip across the Atlantic. One of my goals when I first got my G2X was to master the programming of sequencing parts. I am still bewildered, and hope the tutorial helps me.

[Roland Kuit]

just checked, yours was posted at feb 5, it should arrive any day now. In the chapters House/Techno I and II, you will find step by step sequencer stuff. Even building your own sequencers, crazy sequencers, timings etc.
Combine that with the chapter Logic and you can invent other circuits for years:)

[Roland Kuit]

An other logic update about synchronising with the flipflop module.
see for details:

[Roland Kuit]

Thank you all for suscribing to my newsletter at:

[iPassenger]

Roland,

Will the updates be included when I order a copy off you next month (all being well) or will I need to get them off here?

Cheers

Ross