Nord Modular G2, lag with many step sequencer into a patch

Electromagnetic Wave

Hi,

Into this .prf, I use 2 patch.

Slot 1 : Step sequencer to trigger the kick (and other drums) on slot 2
Slot 2 : Kick, (Clap, HiHat and Bass)

The swing seem to be alterate. This is not consistent and very precise. BUT, the sequence play normal when I select another slot or "Patch Settings" or "Global Panel" or "System/Patch". I use the Master mode.

With the patch :

1. Be careful with the volume (Master Level). The kick sound is on 1/16th. 145 BPM. This is a rolling loop (BBBRRrrrrrr).

2. Load the patch

3. Listen (the groove is affected)

4. Select another slot or push "Patch Settings" or "Global Panel" or "System/Patch".

5, Listen (the groove play normal)

The kick (slot 2) is triggered by the module "1 PTN 3/4" (slot 1). It seem more I use many sequencers into a slot, more the problem is big.

When I look all big patch from you in the archive I will push "Patch Settings" or "Global Panel" or "System/Patch" before now. Or the result can be alterate. Is it a bug ? To me it does not make sense that the groove does not seem stable when I'm on the slot I worked on but it's accurate when I chose a different menu.

This is not a problem about VCO sync/phase or an EQ before a filter (click, glitch, aliasing). I use the DrumSynth in the exemple bellow for the kick sound.

I don't know if it was more accurate to speak about this on the generel discussion before to post it there. But tell me if Im wrong. Smile

my station :
G2 expanded OS v1.40
editor v1.62
Win XP x86

slot1_stepsequencer_randomswing1.JPG

Description:

Filesize:

229.81 KB

Viewed:

681 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

slot2_drum_randomswing1.JPG

Description:

Filesize:

249.1 KB

Viewed:

654 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

stepsequencer_randomswing.prf2

Description:

Download

Filename:

stepsequencer_randomswing.prf2

Filesize:

21.01 KB

Downloaded:

4156 Time(s)

Electromagnetic Wave · Posted: Sat May 11, 2013 8:13 pm Post subject:

I edited my first post after doing some tests to be more accurate, and I've added screen captures from the editor.