Filter 2 Display Page Activation

pfrancq · Joined: May 15, 2016 Posts: 9 Location: Belgium

Hi,
My Andromeda has a strange behavior. Very often, the Filter 2 display page is activated even if I am currently manipulating parameters of other parts of A6. This can be annoying when I program it. Any idea ? Is it a hardware problem ?
Thanks.

SynthasaurusRex · Posted: Fri May 20, 2016 10:02 pm Post subject:

I've never had this problem myself, but others have reported interface problems that were corrected by re-seating the ribbon cables.

-Stephen

sunny pedaal · Posted: Sat May 21, 2016 9:02 am Post subject:

isn't it maybe some dust in one of the knobs or pots around filter 2, therby giving of a signal as if you uturn one of them and showing the corresponding page?
try moving all the buttons some times gently, maybe carefully use some air or vacuumcleaner with a sock/panty around it ( to avod sucking up parts) to get dust out etc?
would be strange to be a big central problem as it always comes to that little page ...
( dustcover especially important with so many buttons/ knobs and pots, and don't smoke )

SynthasaurusRex · Posted: Sat May 21, 2016 1:57 pm Post subject:

Thanks, Sunny. pfrancq, listen to Sunny - he knows this beast better than most of us Very Happy

sunny pedaal · Posted: Wed May 25, 2016 7:42 am Post subject:

already tried?
if not the effect , i would suggest to let a tecniciancheck the filterpot itself , the servicemanual can be loaded from this side ( first topic , see attachments)

pfrancq · Joined: May 15, 2016 Posts: 9 Location: Belgium

Thanks. I will try this in the next days.

RETRIVOX · Joined: Jan 26, 2011 Posts: 12 Location: L.A. Mexico Moscow