Signal Input Question

Wild Zebra · Posted: Tue Aug 16, 2005 11:51 am Post subject: Signal Input Question

So for the Signal Inputs on the VCA and Filter. Can I pass pretty much any audio signal through here?. I.E. Drum Machine, C.D. Player or tape deck? Haven't really messed with anything like that. I was just wondering what would typically be routed through these inputs and if it could potentailly be damaging to say run a tape of something through these from a 4-track or stereo. You get the picture.

mosc · Posted: Tue Aug 16, 2005 12:22 pm Post subject:

For the most part, these things you mention are line level signals and will work as audio sources for any analog synth modules. Go for it! Cool

Wild Zebra · Posted: Tue Aug 16, 2005 12:37 pm Post subject:

Thanks Mosc. Can always count on your input.

mosc · Posted: Tue Aug 16, 2005 1:06 pm Post subject:

Thanks, Wild one.

Oscillators are perhaps the most boring of all signal sources.

Don't forget to try radios - particular old-style shortwave radios tuned to between the stations. All kinds of glorious noise there.

The CV input of the filter isn't just for envelopes and LFOs. Try plugging in an audio-rate signal into the VCF CV input. VCOs are good for this. Crank up the Q or resonance/regeneration. Cool

Wild Zebra · Posted: Tue Aug 16, 2005 1:11 pm Post subject:

Roger Wilco. Over and Out. I'll have to get a nice little old radio from the Thrift Store and rig up an ouput.