electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Articles  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links  |  Store
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software » The layout factory
devsound layouts
Post new topic   Reply to topic
Page 1 of 1 [2 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
PakirRS



Joined: Aug 08, 2017
Posts: 6
Location: Sweden

PostPosted: Wed Sep 20, 2017 2:00 pm    Post subject: devsound layouts Reply with quote  Mark this post and the followings unread

Hi! I've been working on my modular for a long time now, and I've made quite a few layouts on the way. Some are reworks of schematics available online (by some of you guys and some of the classics) and some are my own experiments.

I posted a rework of the appendage ribbon controller in another thread and it was replied to, so I thought maybe I should post some more for yours and my enjoyment.

The design targets were:
* Single row, 100mil spaced, row of holes along one side for easy breadboarding and interfacing to home-made panel PCB.
* As small as possible, always less than 50x50mm or 100x100mm (0.5$ or 1$/pc).
* Through-hole as much as possible (wrong choice in hindsight).
* Eurorack power compatible.

I've made about 30 boards so far, 15 or so built and tested...


Grids001.png
 Description:
Mutable-Instruments Grids
 Filesize:  598.35 KB
 Viewed:  76 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

Grids001.png



KPAS-panel001.png
 Description:
Programmer/Sequencer
 Filesize:  1.06 MB
 Viewed:  77 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

KPAS-panel001.png



WitchCap001.png
 Description:
Modified CGS57 Bi-N-Tic filter
 Filesize:  642.88 KB
 Viewed:  77 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.

WitchCap001.png


Back to top
View user's profile Send private message
Designator



Joined: Jul 18, 2012
Posts: 9
Location: Northern Hemisphere

PostPosted: Thu Sep 28, 2017 3:38 am    Post subject: Reply with quote  Mark this post and the followings unread

Quote:
WitchCap001.png

Laughing

Where are these PCBs made ?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic
Page 1 of 1 [2 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » The layout factory
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
e-m mkii

Please support our site. If you click through and buy from
our affiliate partners, we earn a small commission.


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use