Home

Oscillator Module

Here's a quick technical description of how the Oscillator works: The Oscillator produces a square wave signal with frequency controlled by it's potentiometer. Since the Inverter used is a Schmidt trigger inverter, oscillations are sustained. Taps are provided at the wiper and capacitor for customization purposes. This module will soon be available in our store.

To use the Hex Oscillator Module, simply connect VDD and Ground, then connect the output signal to your circuit. If you wish to customize the frequency range, you may replace the onboard capacitor or use a capacitor to Ground at the Cap Tap pin. Shorting the Cap Tap pin to the Wiper pin removes the range-limiting fixed resistor.