[Header]
Version=Nord Modular patch 3.0
0 127 0 127 2 0 0 1 625 2 1 1 1 1 1 1 1 1 1 1 1 1 1 
[/Header]
[ModuleDump]
1 
1 53 0 3 
2 70 0 5 
12 67 0 1 
23 7 1 6 
25 4 1 12 
26 20 1 1 
[/ModuleDump]
[ModuleDump]
0 
[/ModuleDump]
[CurrentNoteDump]
64 0 0 64 0 0 
[/CurrentNoteDump]
[CableDump]
1 
0 2 0 0 1 0 1 
0 26 1 0 1 0 1 
2 1 1 0 2 0 1 
2 1 0 0 12 0 1 
0 26 0 0 23 0 1 
0 25 0 0 26 1 1 
0 25 1 0 25 0 0 
[/CableDump]
[CableDump]
0 
[/CableDump]
[ParameterDump]
1 
12 67 1 60 
23 7 10 64 64 64 64 1 0 0 0 0 0 
25 4 3 115 0 0 
26 20 6 0 0 77 127 0 0 
[/ParameterDump]
[ParameterDump]
0 
[/ParameterDump]
[CustomDump]
1 
23 1 0 
[/CustomDump]
[CustomDump]
0 
[/CustomDump]
[NameDump]
1 
1 Sample&Hold1
2 LogicInv1
12 Toggle ON/OFF
23 OscA1
25 2 outputs1
26 ADSR-Env1
[/NameDump]
[NameDump]
0 
[/NameDump]
[Notes]
Three different types of flipflops and a way to prevent retriggering until 
the envelope has gone through all of the A, D, S and R stages:
.
1) Toggle ON/OFF state on alternately pressing C4. Handy to start or stop a 
sequence by pressing the same key.
2) SetReset type, C4 sets and D4 resets, pulse modules on the input are 
used to minimize the chance of Set and Reset inputs being on at the same 
time (disallowed state). Handy to start a sequence by a key and stop it by 
some other key, maybe used to start another sequence.
3) D-Type with reset, C4 samples and holds the inputs state (could be a 
blue signal as well) D4 forces the output to OFF or 0 regardless of the 
current outputstate. Handy to conditionally start a sequence and being able 
to force it to stop it by another key.
4) Prevents retriggering (C4) of the envelope until it's completely 
finished and the release state has completely faded out. Can be handy in 
some cases as well, e.g. if a sequence is started by the same key as well, 
and the envelope is a long one laid down over the whole sequence, this 
prevent the sequence to be accidentally restarted until it is completely 
finished, a sort of a one shot mode for a sequence.
.
Have fun,
Rob
[/Notes]