FS(US) Euro SOLD; 5U: SN-Voice, TW RLPG

elmegil · Last edited by elmegil on Mon Dec 30, 2013 10:02 pm; edited 12 times in total

Edited version of post from yesterday on Muff's....edits to remove sold modules.

Looking to get rid of some things that I don’t need to get some Christmas money….or maybe just offset the costs of buying a TTSH Wink

Most of the Euro format stuff I bought used in a complete rack, have played with briefly but not used further. It all has minor rack rash. Euro modules will include mounting bolts and power cables.

The 5U format stuff is all DIY, mostly built by me and all wired by me (a couple pieces I bought/traded partially built). I like the Postman, but I have multiple PCBs, so I can sell knowing I have replacements at hand. I’ve never really clicked with the SN-Voice or the RLPG. The custom 5U panels (see photos) are 1/16” aluminum, MOTM widths, hand drilled, with a sticker and clear coat. The panel design for the Postman is by emdot ambient, for the SN-Voice is mine (though the SN-Voice is clearly inspired by other panels out there). The RLPG has a Bridechamber panes. All of these have minor rack rash as well.

The Postman has 4 different colored LEDs (don’t recall the order, but red, green, yellow, blue), and is the full version with all the bells.

The SN-Voice does not use a standard MOTM power connector on the PCB, but I will include my cable that goes from standard MOTM MTA-156 to the three pin connector. The SN chip is on a BG Micro small-pitch to .1 adapter PCB, plugged into a leaf spring IC Socket--I put it on the adapter before I realized that the PCB had the footprint for the smaller pitch. The rotary switch on the SN-Voice has more positions than needed, so it could be replaced by a better suited one, but this one does the job. You can also see that I messed up gate/envelope label placement on the switch confused

5U modules will include power cords, but not mounting bolts, as I use wood cases and black drywall screws for mounting.

All prices include shipping in the US, if you’re overseas I’m willing to sell but we’ll have to adjust for shipping differences.

This is my first sale, so be gentle. I’ve tried to price reasonably, but if you disagree, I’m open to discuss it. I’ll be happy to answer any questions or post more photos.

All prices USD. Paypal personal, please.

FoH Plague Bearer euro 8hp SOLD
Bubblesound uLFO euro 14hp SOLD
Bubblesound VCOb euro 8hp SOLD
Doepfer A185-2 adder euro 6hp SOLD
Doepfer A165 trig modif euro 4hp SOLD
Doepfer A183 amp euro 4hp SOLD
Synthwerks MG-1 euro 8hp SOLD

SN-Voice 5U custom (3U wide) $250
TW/Buchla RLPG 5U MOTM (2U wide) $240

Pulled the postman, want to keep it...

rlpg-panel.jpg

Description:

Filesize:

194.94 KB

Viewed:

72 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

rlpg-pcb.jpg

Description:

Filesize:

244.6 KB

Viewed:

53 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

sn-voice-panel.jpg

Description:

Filesize:

251.27 KB

Viewed:

70 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

elmegil · Posted: Wed Dec 11, 2013 10:30 pm Post subject:

only 5 attachments? Smile

sn-voice-pcb1.jpg

Description:

Filesize:

342.67 KB

Viewed:

88 Time(s)

This image has been reduced to fit the page. Click on it to enlarge.

elmegil · Posted: Thu Dec 26, 2013 7:26 am Post subject:

Pulled the [original] hold on the MG-1, haven't heard from that person in over a week.