Search found 25 matches

I decided to make my Yusynth smaller but decided to make a smaller as a desktop synth I also adding a mixer and a 8 step sequencer boards are almost made but lots to wire up should be a few months

I gave up on this project for about 2 years but I have given it another go I been working on some mods I manage to work it out the keyboard secton but still have 3 to get working new power board to ...

That's the plan now switches and gate out.

completed version .

Ok made this about a week ago but with computer problems not been able to post it works ..
https://www.youtube.com/watch?v=QTSz1F7wuVM

I haven't tested this myself, but I'm pretty sure this will work. I also don't know how it compares to what is shown on page 6 of that datasheet either. I hope it helps though.

I just put this toge ...

My stand alone version runs of the mains

I just finished building a 2U MPS module. I was greatly influenced by sduck's design and tweaked it to fit my modular style. I bought the XR-2206 at Jameco and everything else at Mouser. I have photos ...

I would like to take full credit for this project but I cannot my friend wired the thing up and got it working I did make the front panel and drill the holes and solder the parts on the board with I g ...

Decided to build another MPS after some one giving me a board so its going into my euro rack so far here a few pictures

Yusynth ADSR

I've just built and tested my own pcb layout of this circuit and it works fine. I can give you the eagle files if you like.

They are a fair few jumpers, but that don't bother me like Wink

would i ...

looks great nice job looks like a lot of work gone into it Smile

... I been working on the cv Keyboard controller part from MFOS today solder 80% of the parts just need sort out caps and install ..

still have a long way to go I want to complete some projects first then I start again Smile

ok I am using the mincv

still have a few things to sort out like some paint work , screws ad some words for midi learn and midi in and stuff here the insides

ok I made a second board as I think the first one I made was wrong I think A is right in the picture

Hello 01012k7. Welcome to the forums. We talked a while ago about the Korg Monotron. How is that project coming along? I have been meaning to do an online tutorial explaining it better and giving some ...

hi guys me and a friend have been working this project we had the nomal problem with the XR 2206 batch 0919 the version I have now is the 0918 not shure if any one had this batch version I got it for ...

Hey Spitfire...
Sorry to necro post but I see a problem on the PCB you etched,I know because I just made the same mistake. I think I should of flipped or reversed the artwork for this board,before I ...

Well it looks beautifulThank you for praising this my project, I decided to start work on this in October start with working on the power supply as they still needed to be tested it has 2 power supply ...

Hi guys I am new here I am also building a yusynth but was a few problem with the people who cut the metal so looks like a modular but more like a korg ms20 look here a picture the bottom part has a ...

One of the most important thing with modular was the connect for power so I decided to make my own ..I had to redo some tracks as forgot to do the ground for the 7805 Embarassed

but will be doing anothe ...

Hello 01012k7. Welcome to the forums. We talked a while ago about the Korg Monotron. How is that project coming along? I have been meaning to do an online tutorial explaining it better and giving some ...

I decided to build this projects too as I have some concerned about wiring up to 230 mains I decided was a better idea to get a friend to check and tested as i am a bit scared of blowing my self up My ...

Hi I decided to signup here because I am in to electronic synthesiser projects and electronic music I like almost all music ...

I been building electronic projects for about 18 months, I do built a ...

Author	Message
Topic: Building a Yusynth modular!
01012k7 Replies: 81 Views: 82754	Posted: Mon Mar 21, 2016 4:38 pm Subject: Building a Yusynth modular! Forum: DIY Hardware and Software » YuSynth
01012k7 Replies: 81 Views: 82754	I decided to make my Yusynth smaller but decided to make a smaller as a desktop synth I also adding a mixer and a 8 step sequencer boards are almost made but lots to wire up should be a few months
Topic: Monotron 2 Octave keyboard project
01012k7 Replies: 4 Views: 11246	Posted: Fri Jun 12, 2015 3:23 am Subject: Monotron 2 Octave keyboard project Subject description: Monotron 2 Octave keyboard project Forum: DIY Hardware and Software » Circuit Bending
01012k7 Replies: 4 Views: 11246	I gave up on this project for about 2 years but I have given it another go I been working on some mods I manage to work it out the keyboard secton but still have 3 to get working new power board to ...
Topic: 16 Step 4017 sequencer?
01012k7 Replies: 45 Views: 96978	Posted: Wed Jun 03, 2015 12:26 am Subject: 16 Step 4017 sequencer? Forum: DIY Hardware and Software » Lunettas - circuits inspired by Stanley Lunetta
01012k7 Replies: 45 Views: 96978	That's the plan now switches and gate out. completed version .
Topic: 16 Step 4017 sequencer?
01012k7 Replies: 45 Views: 96978	Posted: Tue May 26, 2015 4:26 am Subject: 16 Step 4017 sequencer? Forum: DIY Hardware and Software » Lunettas - circuits inspired by Stanley Lunetta
01012k7 Replies: 45 Views: 96978	Ok made this about a week ago but with computer problems not been able to post it works .. https://www.youtube.com/watch?v=QTSz1F7wuVM
Topic: 16 Step 4017 sequencer?
01012k7 Replies: 45 Views: 96978	Posted: Fri May 15, 2015 11:31 pm Subject: 16 Step 4017 sequencer? Forum: DIY Hardware and Software » Lunettas - circuits inspired by Stanley Lunetta
01012k7 Replies: 45 Views: 96978	I haven't tested this myself, but I'm pretty sure this will work. I also don't know how it compares to what is shown on page 6 of that datasheet either. I hope it helps though. I just put this toge ...
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Mon Nov 24, 2014 1:33 am Subject: The Thomas Henry Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	My stand alone version runs of the mains
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Mon Nov 24, 2014 1:27 am Subject: Re: Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	I just finished building a 2U MPS module. I was greatly influenced by sduck's design and tweaked it to fit my modular style. I bought the XR-2206 at Jameco and everything else at Mouser. I have photos ...
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Sat Jun 14, 2014 1:55 pm Subject: The Thomas Henry Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	I would like to take full credit for this project but I cannot my friend wired the thing up and got it working I did make the front panel and drill the holes and solder the parts on the board with I g ...
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Thu Apr 10, 2014 1:31 pm Subject: The Thomas Henry Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	Decided to build another MPS after some one giving me a board so its going into my euro rack so far here a few pictures
Topic: Yusynth Modules in Euro (12 Volt) Systems
01012k7 Replies: 68 Views: 121042	Posted: Mon Mar 10, 2014 3:58 pm Subject: Yusynth Modules in Euro (12 Volt) Systems Forum: DIY Hardware and Software » YuSynth
01012k7 Replies: 68 Views: 121042	Yusynth ADSR
Topic: X-4046 VCO Page is Up
01012k7 Replies: 174 Views: 424292	Posted: Wed Feb 12, 2014 3:57 pm Subject: X-4046 VCO Page is Up Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 174 Views: 424292	I've just built and tested my own pcb layout of this circuit and it works fine. I can give you the eagle files if you like. They are a fair few jumpers, but that don't bother me like would i ...
Topic: Building a Yusynth modular!
01012k7 Replies: 81 Views: 82754	Posted: Sun Jan 05, 2014 2:54 pm Subject: Building a Yusynth modular! Forum: DIY Hardware and Software » YuSynth
01012k7 Replies: 81 Views: 82754	looks great nice job looks like a lot of work gone into it ... I been working on the cv Keyboard controller part from MFOS today solder 80% of the parts just need sort out caps and install ..
Topic: Building a Yusynth modular!
01012k7 Replies: 81 Views: 82754	Posted: Sat Jan 04, 2014 6:02 pm Subject: Building a Yusynth modular! Forum: DIY Hardware and Software » YuSynth
01012k7 Replies: 81 Views: 82754	still have a long way to go I want to complete some projects first then I start again
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Sat Oct 26, 2013 2:03 pm Subject: The Thomas Henry Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	ok I am using the mincv
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Sat Oct 26, 2013 2:00 pm Subject: The Thomas Henry Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	still have a few things to sort out like some paint work , screws ad some words for midi learn and midi in and stuff here the insides
Topic: X-4046 VCO Page is Up
01012k7 Replies: 174 Views: 424292	Posted: Tue Oct 15, 2013 4:13 pm Subject: X-4046 VCO Page is Up Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 174 Views: 424292	ok I made a second board as I think the first one I made was wrong I think A is right in the picture
Topic: Hi i am new here
01012k7 Replies: 4 Views: 3383	Posted: Sun Oct 13, 2013 11:52 am Subject: Hi i am new here Forum: Discussion » Introduce Yourself
01012k7 Replies: 4 Views: 3383	Hello 01012k7. Welcome to the forums. We talked a while ago about the Korg Monotron. How is that project coming along? I have been meaning to do an online tutorial explaining it better and giving some ...
Topic: The Thomas Henry Mega Percussive Synthesizer
01012k7 Replies: 762 Views: 902426	Posted: Sun Oct 13, 2013 1:29 am Subject: The Thomas Henry Mega Percussive Synthesizer Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 762 Views: 902426	hi guys me and a friend have been working this project we had the nomal problem with the XR 2206 batch 0919 the version I have now is the 0918 not shure if any one had this batch version I got it for ...
Topic: X-4046 VCO Page is Up
01012k7 Replies: 174 Views: 424292	Posted: Sun Sep 22, 2013 6:58 am Subject: Re: X-4046 confusion Subject description: Anyone else notice this? Forum: DIY Hardware and Software » Thomas Henry designs
01012k7 Replies: 174 Views: 424292	Hey Spitfire... Sorry to necro post but I see a problem on the PCB you etched,I know because I just made the same mistake. I think I should of flipped or reversed the artwork for this board,before I ...
Topic: Building a Yusynth modular!
01012k7 Replies: 81 Views: 82754	Posted: Sat Sep 07, 2013 9:30 am Subject: Building a Yusynth modular! Forum: DIY Hardware and Software » YuSynth
01012k7 Replies: 81 Views: 82754	Well it looks beautifulThank you for praising this my project, I decided to start work on this in October start with working on the power supply as they still needed to be tested it has 2 power supply ...
Topic: Building a Yusynth modular!
01012k7 Replies: 81 Views: 82754	Posted: Sun Sep 01, 2013 8:13 am Subject: Building a Yusynth modular! Forum: DIY Hardware and Software » YuSynth
01012k7 Replies: 81 Views: 82754	Hi guys I am new here I am also building a yusynth but was a few problem with the people who cut the metal so looks like a modular but more like a korg ms20 look here a picture the bottom part has a ...
Topic: Euro modular power supply project [COMPELETE PCB+SCHEME]
01012k7 Replies: 8 Views: 7038	Posted: Sun Sep 01, 2013 3:08 am Subject: Euro modular power supply project [COMPELETE PCB+SCHEME] Forum: DIY Hardware and Software
01012k7 Replies: 8 Views: 7038	One of the most important thing with modular was the connect for power so I decided to make my own ..I had to redo some tracks as forgot to do the ground for the 7805 but will be doing anothe ...
Topic: Hi i am new here
01012k7 Replies: 4 Views: 3383	Posted: Sat Aug 31, 2013 12:37 pm Subject: Hi i am new here Forum: Discussion » Introduce Yourself
01012k7 Replies: 4 Views: 3383	Hello 01012k7. Welcome to the forums. We talked a while ago about the Korg Monotron. How is that project coming along? I have been meaning to do an online tutorial explaining it better and giving some ...
Topic: Euro modular power supply project [COMPELETE PCB+SCHEME]
01012k7 Replies: 8 Views: 7038	Posted: Sat Aug 31, 2013 4:17 am Subject: Euro modular power supply project [COMPELETE PCB+SCHEME] Forum: DIY Hardware and Software
01012k7 Replies: 8 Views: 7038	I decided to build this projects too as I have some concerned about wiring up to 230 mains I decided was a better idea to get a friend to check and tested as i am a bit scared of blowing my self up My ...
Topic: Hi i am new here
01012k7 Replies: 4 Views: 3383	Posted: Sat Aug 31, 2013 4:00 am Subject: Hi i am new here Subject description: new member Forum: Discussion » Introduce Yourself
01012k7 Replies: 4 Views: 3383	Hi I decided to signup here because I am in to electronic synthesiser projects and electronic music I like almost all music ... I been building electronic projects for about 18 months, I do built a ...