Problem with the Rebote 2.5

probablyjoel · Joined: Aug 31, 2008 Posts: 11 Location: Seattle

I don't know what is going on with this thing. I've checked and rechecked, and rechecked, and rechecked, and so on...

I made the PCB, populated the board, wired it up, and nothing, ABSOLUTELY NOTHING. No sound at all through the amp.

Has anyone else had this problem? From everything I've read, the Rebote 2.5 is supposed to be super easy. I'm going frickin nuts because I just cannot see what is wrong.

Any suggestions?

Pehr · Posted: Sun Mar 08, 2009 11:40 pm Post subject:

Power?

probablyjoel · Joined: Aug 31, 2008 Posts: 11 Location: Seattle

yeah, there's no power problems... already checked that:).

Pehr · Posted: Tue Mar 10, 2009 12:26 am Post subject:

is there any signal on the PT-chip output?
if not, check the input

probablyjoel · Joined: Aug 31, 2008 Posts: 11 Location: Seattle

I got really frustrated and reflowed each solder point of the board. When I tried it after that, I was actually able to hear a little delay, but my amp had to be up halfway for the signal to be audible. Maybe something is grounded that shouldn't be?