Any interest in a 4th run of Klee Sequencer boards?

mosc · Posted: Tue Jan 27, 2009 11:03 am Post subject:

midnightPizza

Great to have you here.

magneticstripper · Joined: Jan 12, 2009 Posts: 25 Location: San Francisco

put me down for one

mosc · Posted: Thu Jan 29, 2009 12:17 pm Post subject:

I'm not reserving boards for people who chime in here. This is just to give me a good feeling that there will be enough orders that I won't loose money ordering another run. When the boards do come in, I'll post an announcement here and then people can order them on the store.

thanks

indeep · Joined: Jun 05, 2008 Posts: 25 Location: indeep

Revised..two boards for me.

rezzn8r · Joined: Feb 08, 2009 Posts: 2 Location: Toronto, Canada

i would also be interested in some klee PCBs, in case you're still on the fence about proceeding with the 4th run

pdman1 · Posted: Mon Feb 09, 2009 10:19 am Post subject:

I'll take a set of PCBs as well.
What will the cost be?

Thanks

williamsharkey · Joined: Jul 31, 2005 Posts: 61 Location: usa

1 Board for me

===========
edit, I will buy 2. One for me, one for a friend.

v-un-v · Posted: Sun Feb 15, 2009 4:06 am Post subject:

mosc · Posted: Sun Feb 15, 2009 8:53 am Post subject:

Each Klee batch has been 100, so that makes 300, minus a few that got lost along the way.

v-un-v · Posted: Sun Feb 15, 2009 4:51 pm Post subject:

wow- 300 or so little Klee babies Cool

I'm finally getting round to putting mine together this week. It was a shame that I was in the middle of my university dissertation when the initial work was done. Hey-ho, all good things come to those who wait eh? Cool

mosc · Posted: Mon Feb 16, 2009 1:33 pm Post subject:

I would be surprised if half of the boards eventually get stuffed. Some people bought as many as 8 sets. I haven't seen any pics from them on the forum of a rack of 8 Klees. That would be something to see though.

blue hell · Posted: Mon Feb 16, 2009 2:15 pm Post subject:

Holy shit ... 8 Klees Shocked

Mubo · Joined: Jul 21, 2008 Posts: 16 Location: ft.lauderdale

PLEASE PLEASE PLEASE!

BUT ONLY IF I CAN GET A PARTS KIT TOO!!!

makenoise · Joined: Sep 10, 2008 Posts: 12 Location: USA

Interested Smile

minime123 · Joined: Feb 20, 2009 Posts: 13 Location: 123synthland, USA

im definitely interested though im much more likely to buy a complete kit, front panel and all... is anyone putting together a kit with a front panel, pots and, well, everything required as well? and is anyone actually selling assembled units?
btw mosc, thanks for the great job you do with this forum.
mini

ToxicTv · Joined: Dec 09, 2008 Posts: 7 Location: Belgium

hi, i m interested in for 1 pcb board.

how should i do ? is it planed soon ?

ToxicTv · Joined: Dec 09, 2008 Posts: 7 Location: Belgium

i ll even take 2 pcb

mosc · Posted: Mon Feb 23, 2009 12:08 pm Post subject:

timmah · Joined: Feb 25, 2009 Posts: 1 Location: Melbourne

I would be in for a set of PCBs.
I would prefer a full kit with frontpanel (3.5mm jacks), but PCB + parts like the 3rd run would be awesome.

mosc · Posted: Thu Feb 26, 2009 10:48 am Post subject:

Timmah, great to have you here.

kkissinger · Posted: Thu Feb 26, 2009 5:46 pm Post subject: I would like one or two PCBs

Does this come with a parts list, too?

Naturally, I would prefer a parts kit along with the PCBs -- as long as the parts are readily available then I'm ok with it.

tensility · Joined: Feb 26, 2009 Posts: 2 Location: San Jose, CA

Being fond of mad fun, I should like a fine pair, please...with a caveat. I'm willing to self-source parts if no kits are offered; however, before committing to such an endeavor, I'd like to know if any parts on the BOM are rare, expensive, or otherwise frustrating to come by. Thanks!

Scott Stites · Posted: Fri Feb 27, 2009 8:00 am Post subject:

Hey K. Kissinger - the BOM is in the build doc, which can be found in this thread here:

http://electro-music.com/forum/topic-24821.html

Tensility - no exotic parts are used. Everything is current production, and can be had at Mouser, Digikey, Jameco, etc. Probably the most "exotic" part would be the 100K 0.1% resistors used for summing. You can drop the bux and buy those, or you can get a bag of 100K 1% and pick 16 that are within 0.1% out of that, which is much cheaper, but a bit more work.

Cheerios,
Scott

tensility · Joined: Feb 26, 2009 Posts: 2 Location: San Jose, CA

Sweet! I'm definitely good for a pair then. Thanks!

soundlabz · Joined: Mar 01, 2009 Posts: 3 Location: Princeton, NJ

New Member Interested In (2) pairs of PCB Boards