Midi Question Lead3

Nordleadagent · Joined: Jan 25, 2009 Posts: 35 Location: Germany

Will a Midi-signal received on Ch1 (f.e. a bass pattern from a sequenzer) be send on Midi-out on Ch1?
I won´t play this slot (Ch1) on the keyboard but use Slots 2-4 only.

Wout Blommers · Posted: Fri Jan 30, 2009 2:16 pm Post subject:

It's the same as in the NordLead2X: only active Slots will send Midi, although all the time also the non-active Slots will react to Midi, so, in your set up: don't activate SlotA and don't send any Midi-In on the channels used by three other Slots. Just for the record, I would change the locations in SlotA to SlotC active and controlled by the KeyBoard; SlotD controlled by extern Midi.

Wout

Nordleadagent · Joined: Jan 25, 2009 Posts: 35 Location: Germany

Could you explain, why you would change to A-C for the panel voices and D for the external control voice?

Wout Blommers · Posted: Fri Jan 30, 2009 4:42 pm Post subject:

Well, I can't find it in the Manual and I'm not in the mood to check it out, but other Clavia synths have a special feature in there architecture: all Slot react to the left-most Slots Midi channel, so using Slot D isn't interfering with the three others...

Wout