Aries modular

CZ Rider · Joined: Dec 14, 2006 Posts: 17 Location: Southeastern,PA

Quick update on my Aries system I'm trying to put back together.
Finally got around to cutting the case to size and gluing together.
Posted Image, might have been reduced in size. Click Image to view fullscreen.

Posted Image, might have been reduced in size. Click Image to view fullscreen.

This time I tried a tung oil finish. The last walnut cab I made I used a polyurethane finish.
Posted Image, might have been reduced in size. Click Image to view fullscreen.

Everything fits OK, a big concern with my design, it had to be within 1/64" for everything to look right.
Posted Image, might have been reduced in size. Click Image to view fullscreen.

The wood turned out nice.
Posted Image, might have been reduced in size. Click Image to view fullscreen.

I have a nice module assortment and they look almost new without any signs of heavy use.
Posted Image, might have been reduced in size. Click Image to view fullscreen.

Next I have to make the wiring harness, test/fix/callibrate each module, and mount a new power supply.
I'm half way there? Smile

I post more pics and sounds as I progress.
Hopefully someday I'll get this in Roberts hall of fame of Aries systems. Cool

terjewinther · Joined: Aug 31, 2004 Posts: 65 Location: Nesodden, Norway

Great photos!
And a really good job you have done. The modular looks so fine with the custom woodwork and all. This will be an excellent system to work on. Best wishes for the last part of the job!

Adam-V · Posted: Sun Oct 25, 2009 8:15 pm Post subject:

Excellent work!

Cheers,
Adam-V