electro-music.com   Dedicated to experimental electro-acoustic
and electronic music
 
    Front Page  |  Radio
 |  Media  |  Forum  |  Wiki  |  Links
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 
 Forum index » DIY Hardware and Software » Rob Hordijk DIY Designs
Benjolin voltage level outputs
Post new topic   Reply to topic Moderators: Rob
Page 1 of 1 [2 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
elmegil



Joined: Mar 20, 2012
Posts: 2177
Location: Chicago
Audio files: 16

PostPosted: Sun Jun 26, 2016 2:42 pm    Post subject: Benjolin voltage level outputs Reply with quote  Mark this post and the followings unread

I've built a couple different Benjolins now from a couple different PCBs I've been working on. My peak to peak values are pretty different from each other and I wanted to validate this against someone with a "standard" Benjolin build if you have time to check for me....

Both oscillators' triangle outputs are 7.8 - 8 Vpp. Pulse outputs are 15.2 Vpp.

I know the VCF output is supposed to be line level, so that's 1.6 / 1.7Vpp on my units, totally within spec.

The pulse is generated by a comparator on the triangle, and I'm using TL07X op amps (I actually divided one of the TL074's into two TL072's for spacing things out), so I get the 15.2Vpp since this isn't rail to rail. I just want to be sure that the output of the triangle stage looks right?
Back to top
View user's profile Send private message
macumbista



Joined: Sep 12, 2007
Posts: 398
Location: berlin
Audio files: 3

PostPosted: Tue Jan 17, 2017 9:37 am    Post subject: Reply with quote  Mark this post and the followings unread

Maybe you found this already, but the Epoch Modular Benjolin has the following measurements:

Quote:
The filter outputs go from +2 to -2V, the triangle outs are ±4V, the rungler and XOR are ±5V, the pulses ±8V, and the PWM range is ±8.5V.


Source: http://www.emusician.com/benjolin

_________________
Esoteric drones and nonlinear distortion
Custom/handmade experimental instruments
macumbista.net
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic Moderators: Rob
Page 1 of 1 [2 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » Rob Hordijk DIY Designs
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2009 by electro-music.com - Conditions Of Use