cwejman Adsr tuning

[verstaerker]

i wondered from the beginning on why the audiooutput-level get's lower when i use the Adsr with the VCA-4MX

yesterday i worked with a Doepfer A-140 Adsr and i was surprised that the output level is noticeable louder (and matches the original volume)

so i changed the dip-switches on the Cwejman Adsr to 8V output and turned down the DC out

the result was the same as with the Doepfer Adsr - the output level is now as loud as without Adsr and it's much more dynamical

i also checked with an oscilloscope: the Doepfer Adsr had approxemately 4V out, the Cwejman in it's 5V setting only 2.5 - 3v - now it goes almost to 5V (what i would expect from the 5V setting)

[Jari Jokinen]

How did you turn down the DC out?

Without any adjustments the peak levels of ADSR-VC2 should be 5V or 8V.

My VCA-4MX gives unity gain with 5V CV, if the corresponding level knob is at full clockwise position (I haven't touched the gain trim pots). With 8V envelopes I more often turn the level(s) down to avoid clipping.

[verstaerker]