Source of Uncertainty and 208Random PCBs

[AlanP]

http://electro-music.com/forum/post-423840.html#423840

I've got four sets of Dunno boards, including both the five PCBs and the panel. This is a very big build, and needs a few rare parts:

CD4006 18 bit tapped shift register
2x VTL5C3 vactrols
2x VTL5C3/2 vactrols
Electric Druid Noise 1B
Low profile electrolytic capacitors
2x LF398 sample and hold chips

https://www.dropbox.com/s/gfi8o5qptdap86j/dunno%20v0.2.zip?dl=0
Build doc, and associated pictures

This is a EURORACK format project, and uses Thonkiconn jacks on the panel.
I'm asking $65 per set of boards, shipping included. I would also ask that builders report back to me any issues arising, any lack in the build docs, or success.

http://electro-music.com/forum/post-422831.html#422831

I've got three sets of 208RND boards. This one uses bog standard parts.

https://www.dropbox.com/s/hx3u824y9fqhorv/208rnd.pdf?dl=0
Build doc, and associated pictures.

This is also a EURORACK project, and uses PJ302M right angle jacks.

TRACE CUTS NEEDED for the 208RND board.

No trace cuts needed for the Dunno.

[elcoco]

Definitely interested, any tips on where to get the hard to find parts?

[AlanP]

Vactrols and capacitors, you can get from diyguitarpedals.com.au, LF398 you can get from Mouser, Electric Druid Noise1B you can get directly from Electric Druid, and the 4006 is an ebay job, I suspect.

[elcoco]

Just finished building one of these bad boys and it couldn't of gone more smoothly. Thanks for all the hard work and help Alan.

[masterofstuff124]

I didnt realize you were selling these. PM'ed!

i want all your designs AlanP; they all look great!

[colorbars]

Built the 208RND from alanp, great module! That dunno looks great too