Electro-Music Klee Sequencer Build and Applications Thread

Scott Stites · Posted: Sun Jul 22, 2007 10:38 am Post subject:

v-un-v · Posted: Sun Jul 22, 2007 10:39 am Post subject:

No problem Keith Smile

Where in the uk are you from?

Scott Stites · Posted: Sun Jul 22, 2007 10:53 am Post subject:

Check this out!

http://home.freeuk.net/lowpass/

I can't believe I don't have this in the quick links thread...yet.

Cheers,
Scott

keithwin · Joined: Jul 20, 2007 Posts: 83 Location: uk

NW England,
Stockport to be more accurate.
Surprised

)

mosc · Posted: Sun Jul 22, 2007 11:25 am Post subject:

Keith...

norman phay · Posted: Mon Jul 23, 2007 5:02 am Post subject:

Alienation · Joined: Jul 23, 2007 Posts: 47 Location: Midsouth

I would like to commit to a set of your PCB's. I hope you are expanding your run or planning the next one very soon.

I consider myself lucky to have caught a couple of Tau Phaser pcb's off of Jurgen Haible's site which brings me to a good point here...

Group buys are the way to go and thanks for offering one.

Now add me to your list please. Twisted Evil

Scott Stites · Posted: Tue Jul 24, 2007 10:28 am Post subject:

Hi All,

The original run of 80 has been filled - a few extras will be ordered as well, just to make sure we're covered for any event. I can keep track of a list for anybody who would be interested should any of these board sets become available. Could be a second run may be in the future as well - I've never mentioned this project outside of EM. I thought about it, but the response here overwhelmed my highly scientific guestimation of actual interest so quickly, I just kept mum about it except for here.

Anyway, the proto-boards have been ordered. The Analogue Board should arrive this week. The Digital Board will take a bit longer - it was a tad too large to squeeze into Express PCBs protoboard special, so I had to order an actual production run. I'll post pictures of the boards as they arrive.

Once the protos are proven to work, the main order will be placed.

Once again, thanks to all! I'm pretty excited about this.

Cheers,
Scott

State Machine · Posted: Tue Jul 24, 2007 10:58 am Post subject:

prophei · Posted: Tue Jul 24, 2007 11:01 am Post subject:

is the most recent parts-list posted...?

Scott Stites · Posted: Tue Jul 24, 2007 11:08 am Post subject:

Hey Bill,

I've been racking my brain on what to do panel-wise for the proto as well.

Did I send you the latest BOM? Embarassed

I'll get it out to you when I put the changes into rev 1.01.

In the meantime, on the Analogue Board:

R26, R27, R28, R29 change from 10K to 150K, 1% metal film.

R34, R35, R36, R37 change from 1K Trim to 10K Trim.

So, Prophei, one would drop four 10K resistors and add four 150K resistors, and drop four 1K multi-turn trimmers and add four 10K multi-turn trimmers.

I think Bill's working on a much more detailed BOM than what I've supplied (eventually we'll submit a BOM for each board rather than a combined one as well).

That's it!

Cheers,
Scott

State Machine · Posted: Tue Jul 24, 2007 12:05 pm Post subject:

Scott Stites · Posted: Tue Jul 24, 2007 12:23 pm Post subject:

Okee doke. It may be a day or two...I'm not feeling too well today. Kinda flu-like. Maybe it's all the excitement Very Happy

Yakachalater,
Scott

Scott Stites · Posted: Mon Jul 30, 2007 4:40 pm Post subject:

The Analogue Board Prototypes are in! I don't expect the Digital Board prototypes for another week or so (they were too large to qualify for the express proto service). Once they're in, the proto test can begin, and once they're confirmed, the main order will be placed.

In the meantime, didn't Andy do a fabulous job?

EMKlee_Analogue_Board.JPG

Description:

electro-music Klee Sequencer Analogue Board Prototype

Filesize:

96.5 KB

Viewed:

18272 Time(s)

elektro80 · Posted: Mon Jul 30, 2007 4:43 pm Post subject:

This is stunning work! Applause!

Randaleem · Joined: May 17, 2007 Posts: 456 Location: Northern CA, USA

Very nice work Andy!

Looking forward to the digital board!

Randal

State Machine · Posted: Mon Jul 30, 2007 6:49 pm Post subject:

goodrevdoc · Posted: Mon Jul 30, 2007 11:26 pm Post subject:

That is some great work Uncle K. Dare I say, even better than your stripboards...
-justin

fonik · Posted: Mon Jul 30, 2007 11:43 pm Post subject:

...

Pehr · Posted: Tue Jul 31, 2007 12:05 am Post subject:

awesome

how big is the digital board?

Wild Zebra · Posted: Tue Jul 31, 2007 7:09 am Post subject:

Sweet, nice and tidy!

Scott Stites · Posted: Tue Jul 31, 2007 2:39 pm Post subject:

The Alison Project · Posted: Tue Jul 31, 2007 3:47 pm Post subject:

oh man, i think my heartbeat just increased a bit..

kryptic · Joined: Feb 16, 2007 Posts: 40 Location: somewhere

Yay!

Pehr · Posted: Tue Jul 31, 2007 11:40 pm Post subject: