8-Step Sequencer with voltage controllable pattern (VCPS)

[fonik]

soon. i will have to write up the docs, and i will have to triple check my latest change on the circuit:
i changed the reset circuit a little bit. it now resets on upgoing pulse/gate, thus the external reset input is no longer inhibiting the sequencer. this is very handy if you wanted to reset you sequencer using an divider.
a common divider gives you long gates. as long as the reset in on the 4017 is high it is stopped. it is an stop-reset actually. so i altered the reset input of the sequencer to a gate2trig. any gate will result in a short reset pulse.

[philpeery]

Hi Fonik! Put me in for 2, this looks like a great project! your case looks great!

-Phil

[oldmanfury]

Looking like it's getting close! Put me down for one.

-gerald

[CJ Miller]

I am happy that my EFM archives have been an inspiration! There is even a third folder of schematics and such which I was going to upload, but my old mac is broken now so it will need to wait until I fix it. It's going to be liquid cooled, next time around.

Meanwhile, please do put me down for two PCBs if you plan on offering them.

[adambee7]

I'll have two for sure mat. cheers.

[a100user]

I'd like one please

[fonik]

hi all,

i am now taking orders for this project until monday, the 17th of may.
BTW i think i registered all placed orders by today, the 4th of may. i am still writing up the building docs, so stay tuned. however, the current schematic can be found in the 1st post of this thread.

the pricing:
1 PCB 12.-EUR/16.-USD (may drop depending on orders)
+ p&p:
outside europe 4.-USD 1 PCB, 8 USD 2+ PCBs
europe 3.-EUR
deutschland 2.-EUR

i won't take any money until i hold the boards in my hands, so just post in this thread, PM or email me if you are interested (following the recommendations for PCB sales on electro-music.com).

This is not a beginners project. some wiring has to be done, and more than 10 ICs are placed on this 4.9x3.9in PCB.

for more information refer to 1st post in this thread.

[tommi]

Hello Fonik,
I confirm my interest for one PCB!
Thanks.

[a100user]

Definitly one for me please

[magman]

Matthais,

I've been watching this project with great interest, glad to see its finally coming to fruition.

Put me down for 2 boards please.

Regards

Magman

[lexvortex]

Hi Fonik,

I'll take one PCB!!

Cheers,
Dave

[Skrog Productions]

Hi Fonik .

fantastic news , i look forward to their release & invoice .

Thanks
Dave

(2 - pcb's)

[jaidee]

One PCB for me.

Thanks Fonik!

[fonik]

hi all. due to the increasing interest in this project i will be able to drop the price a little bit (see below):

the pricing:
1 PCB 10.-EUR/13.-USD
+ p&p:
outside europe 4.-USD 1 PCB, 8 USD 2+ PCBs
europe 3.-EUR
deutschland 2.-EUR

[adambee7]

that's a good price man.

[xpmtl]

I'll take one board

Thanks

[TekniK]

Matt,question (maybe weird):

Is it possible to use this pcb and poppulate it to use it only as a simple 8 step sequencer (so without the adc thing etc),can maximum ic's been ommited?

[fonik]

[magneticstripper]

(2) thanks.

[krisp14u]

4 Please matthias

[ach_gott]

4 please, mattias.

[TekniK]

[source66]

In for 2. Thanks

[tomcat]

3 for me please

[a100user]

Hi Matt,

I'll up my request to 2 please.

Thanks

David