| Author |
Message |
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
 Posted: Wed Apr 27, 2011 7:13 pm Post subject:
|
  |
|
| emdot_ambient wrote: |  Awesomeness!
...but I want a Bentley! (as if I don't have too many things in my pile already and could possibly build this thing as soon as it arrives...yeah, right! And monkeys might fly out my butt!) |
Haha! You shall have one!!! So far as I know it's really just bringing the patch points out. I might just make a guide myself on it, once I'm sure that I understand it completely.
He's very busy with personal stuff, last I heard. I don't expect that he will have time very soon, unless something has changed. I will see if I can find a few hours to polish up a second board overlay with the bentley panel wiring.
Ah yes, here is the panel wiring information. I will have to add this to the .PDF in the next revision:
Panel Wiring Wire Pad Designation
Control Voltages CV1, 2, 3, 4
Ext In EXTIN
Frequency Controls F1.1-3, F2.1-3, F3.1/2, F 4.1/2, F5.1/2, F6.1/2
Range Controls R1.2/3, R2.2/3
Balance Controls BAL1,2,3
CV Offsets OS1.1-3, OS2.1-3
Outputs Out, Out2
Power (GND) GND, GNDA, GNDB
Power (+V) +V, +V1
Power (-V) -V, -V1
Bentley Mod Patch Points HEX1,SUM1/2,X1,X1.2,X2,X2.1,X3,X3.2,X4,X4.1 |
|
|
Back to top
|
|
 |
ach_gott
Joined: Sep 09, 2008
Posts: 79
Location: Chicago
|
| Posted: Wed Apr 27, 2011 7:32 pm Post subject:
|
|
|
Oh shit... I thought I'd raised my hand... back when this was in the layout forum. Did you count those? Or was that a completely different drum pcb?
 |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Wed Apr 27, 2011 7:35 pm Post subject:
|
|
|
I've got ya down here, yup! You're actually the first one on my list 
I thought I would send PM's to everyone that pre ordered, but I actually don't want to go through the trouble of messaging a bunch of people right now. Just send payment when you can following the instructions in the first post, and include your username in the order details on the paypal form
| ach_gott wrote: | Oh shit... I thought I'd raised my hand... back when this was in the layout forum. Did you count those? Or was that a completely different drum pcb?
|
|
|
|
Back to top
|
|
|
Paradigm X
Joined: Feb 15, 2011
Posts: 363
Location: Null and void
Audio files: 2
|
| Posted: Thu Apr 28, 2011 1:36 am Post subject:
|
|
|
As one of the later ones, do you know where the cutoff point is?
Fair enough if i missed out, no problem, i only just cuaght this. But i want to know whether to pay now or wait to see if im waiting on a canellation or so.
No hard feeling etc,
Cheers
Ben
=) |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Thu Apr 28, 2011 4:48 am Post subject:
|
|
|
Well, I toyed with the idea of sending messages out to everyone and handling it like a reserved pre-order sort of thing, but then it occurred to me that I haven't taken payment for anything yet...and there will probably be people that are MIA/not interested anymore.
So it's basically a free-for-all, since I have not received payment in advance for anything. I will give priority to people who requested boards should it come down to a dispute between payments.
I am probably going to order a handful more boards once this batch is mostly done for myself and others that might want some - those will be reserved ones for whoever missed the first time around!
So, nobody should miss out, completely 
It's hard to please everyone 
| Paradigm X wrote: | As one of the later ones, do you know where the cutoff point is?
Fair enough if i missed out, no problem, i only just cuaght this. But i want to know whether to pay now or wait to see if im waiting on a canellation or so.
No hard feeling etc,
Cheers
Ben
=) |
|
|
|
Back to top
|
|
|
Paradigm X
Joined: Feb 15, 2011
Posts: 363
Location: Null and void
Audio files: 2
|
| Posted: Thu Apr 28, 2011 6:10 am Post subject:
|
|
|
Thanks 
Well, im ready and able to pay now but feel a bit bad cutting in line as it were. How many short are you?
I think ordering a few more boards if youve got the money time and patience is probably worth it; once a few people have built and shown off theirs interest will rise again. Im sure youll sell them. Thinking about it i should have gone for two as suggested above for a closed and open.
Ill wait a week or so and let the others have a chance first, if by then theres still a spare ill grab it. Does that sound fair enough? And ill prob order a second in the second batch.
Only reason im querying this is i need to order the parts so dont really want to order a load of bits i can use.
Cheers for sorting all this out.
Ben
|
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Thu Apr 28, 2011 12:23 pm Post subject:
|
|
|
| Paradigm X wrote: | Thanks
Well, im ready and able to pay now but feel a bit bad cutting in line as it were. How many short are you?
I think ordering a few more boards if youve got the money time and patience is probably worth it; once a few people have built and shown off theirs interest will rise again. Im sure youll sell them. Thinking about it i should have gone for two as suggested above for a closed and open.
Ill wait a week or so and let the others have a chance first, if by then theres still a spare ill grab it. Does that sound fair enough? And ill prob order a second in the second batch.
Only reason im querying this is i need to order the parts so dont really want to order a load of bits i can use.
Cheers for sorting all this out.
Ben
|
I am 4 boards short of fulfilling all the people who showed interest. That is if they only order the amount they asked for...if anyone wants more we're SOL...so yeah, I definitely should have ordered more than I did...hmph.
That sounds great! Thanks for backing out for a bit, then. I feel like a total ass making it free for all but I'm expecting that quite a handful will not be interested/have forgotten/yada yada...rest assured that noone will miss out completely though! At worst if there is someone that needs just one or two boards more than were ordered and does not make it worthwhile to make a whole order, I can just make some myself for that special case.
I emailed the PCB manufacturer to request another order, which I will place once funds start trickling in from this batch! |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Thu Apr 28, 2011 12:31 pm Post subject:
|
|
|
| Oh yes, if you are one of those that have sent me a paypal payment up to this point, your boards will be shipped tomorrow evening!!! Any payments that get in between now and then should also make it there tomorrow evening. |
|
|
Back to top
|
|
|
Danno Gee Ray
Joined: Sep 25, 2005
Posts: 1351
Location: Telford, PA USA
|
| Posted: Thu Apr 28, 2011 2:27 pm Post subject:
|
|
|
| Payment sent for 1 PCB. |
|
|
Back to top
|
|
|
jojjelito
Joined: Jun 27, 2007
Posts: 50
Location: Stockholm, Sweden
|
| Posted: Thu Apr 28, 2011 2:42 pm Post subject:
|
|
|
| This is full of win! I'm getting stoked. |
|
|
Back to top
|
|
|
Paradigm X
Joined: Feb 15, 2011
Posts: 363
Location: Null and void
Audio files: 2
|
| Posted: Fri Apr 29, 2011 5:22 am Post subject:
|
|
|
hi
slighlty OT;
Would a 470k pot be OK for that AR generator?
I cant find a 500k pot at my suppliers... Get free shipping at the mo so would rather get it from here if possible. If a critical value ill grab elsewhere.
Cheers
BEn |
|
|
Back to top
|
|
|
emdot_ambient
Joined: Nov 22, 2009
Posts: 667
Location: Frederick, MD
|
| Posted: Fri Apr 29, 2011 6:10 am Post subject:
|
|
|
I think you'll do just fine with a 500K pot. Most pots are +/-10% tolerance or worse anyway. Which means the typical 500K pots could actually be anywhere from 450K to 550K.
_________________
Looking for a certain ratio since 1978 |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Sat Apr 30, 2011 11:12 am Post subject:
|
|
|
Alright, I hate a busy night and forgot to reply here when I shipped your guys' orders! Hah...anyways:
To those that have placed orders thus far: your packages were shipped last night via Canada Post! You should get them anywhere from 1 week+ depending where you live
I will update this post with a list of usernames so you know for sure that your order shipped - I'm just on my way to work now so don't have the time to go through the list and add your names here! |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Sun May 01, 2011 8:18 pm Post subject:
|
|
|
I have shipped your order up until this point if your username is on this list:
emdot_ambient
Danno Gee Ray
jumunius
diablojoy
blackcelcius
Olga42
To the rest of you who have sent payments: the next shipment should be going out either Monday or Tuesday! |
|
|
Back to top
|
|
|
JoeMorris
Joined: Apr 26, 2009
Posts: 161
Location: Brighton
|
| Posted: Sun May 01, 2011 11:16 pm Post subject:
|
|
|
| happy to wait until next round, i would love two together in one box with dual ar and vcas anyway now ive thought about it! |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Mon May 02, 2011 5:16 pm Post subject:
|
|
|
I've just got back from the post office yet again! I have just shipped these peoples' orders!:
ach_gott
mattias
dego
The next round of orders will go out likely Wednesday or Thursday! |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Wed May 04, 2011 6:26 pm Post subject:
|
|
|
Okay! So I've started working on the Bentley mod instructions Hopefully I will have some time to finish those and the graphics for them off, soon.
There are still over half of the boards unclaimed as of right now!
The next order should be going out on Friday |
|
|
Back to top
|
|
|
LektroiD
Joined: Aug 23, 2008
Posts: 1019
Location: Scottish Borders
Audio files: 2
G2 patch files: 2
|
| Posted: Wed May 04, 2011 6:28 pm Post subject:
|
|
|
Lucky I caught this before they went.
Paid.
_________________
LektroiD |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Thu May 05, 2011 6:48 pm Post subject:
|
|
|
Well, the Bentley mod diagram is well underway! I shall update the .PDF with it once it's done and make an update.
People that have ordered boards since/on Wednesday - your boards should be shipping tomorrow evening! |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Fri May 06, 2011 3:14 pm Post subject:
|
|
|
I've just uploaded the new .PDF file containing the guide for doing the Bentley Mods! Yay.
Everyone's orders are going out tonight 'will report back once I'm back from the post office! |
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Fri May 06, 2011 6:14 pm Post subject:
|
|
|
I've just got back from shipping these peoples' orders!:
hadal-drop
LektroiD
tazer
reve
textual
julianw
monokinetic
mig27
There are only six boards left for grabs! Yikes. Once someone builds one and confirms the integrity of the boards I will order some more (in case a revision is needed) |
|
|
Back to top
|
|
|
loydb
Joined: Feb 04, 2010
Posts: 393
Location: Providence, RI
|
|
|
Back to top
|
|
|
HexInverter
Joined: Aug 21, 2010
Posts: 338
Location: Canada
|
| Posted: Sat May 07, 2011 10:04 am Post subject:
|
|
|
| loydb wrote: | I don't think I've paid for my two yet, so I just sent you monies
If I've paid twice, I'll take two more from the next run.
Thanks for this! |
My pleasure! It's been fun!
Okay! Your order will ship on Monday |
|
|
Back to top
|
|
|
active
Joined: Jan 21, 2011
Posts: 23
Location: Brooklyn, NY
|
| Posted: Sat May 07, 2011 11:14 am Post subject:
|
|
|
| Horah! just ordered 1 board to nyc. Thanks so much for this!! |
|
|
Back to top
|
|
|
Paradigm X
Joined: Feb 15, 2011
Posts: 363
Location: Null and void
Audio files: 2
|
| Posted: Sun May 08, 2011 9:13 am Post subject:
|
|
|
| Well, ive waited a week and a hlaf, think thats fair enough, payment sent |
|
|
Back to top
|
|
|
|
Forum index » DIY Hardware and Software
FAQ
Calendar
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Chat Room
